Acoustic Emission Equipment Available In Malta
-
Manufactured by TVT Termoventiltecnica S.r.l.based in ITALY
In conformity with the most severe restrictions, TVT offers a single emission point for gaseous effluents out-coming from the same processing. Due to this technology it is possible reduce environmental impact and acoustic emissions and avoid the ...
-
Manufactured by Physical Acoustics Corporation (PAC)based in USA
The PKWDI sensor is a wideband frequency, acoustic emission sensor with an integral, ultra low noise, low power, filtered, 26dB preamplifier, which can drive up to 200 meters of cable. This sensor represents an improvement in both noise and low power consumption performance, with noise level below 3 µV and power consumption of 25 ...
-
Manufactured by FIBA Technologies, Inc.based in USA
modular tube trailers (which have 18 to 54 tubes) to supply a variety of product volumes. Our modular tube trailer is manufactured in a patented, modular design (U.S. Patent No. 4,784,399; dated 11/15/88) to allow for the Acoustic Emission/Shearwave testing up on the chassis, thus reducing the maintenance costs at the time of retest. FIBA now holds ...
-
Manufactured by Physical Acoustics Corporation (PAC)based in USA
So how do you make sure all your new and existing Acoustic Emission products are calibrated and performing at maximum capacity –- the FieldCAL. MISTRAS' low-cost, hand-held AE signal generator is battery-powered and can produce all the necessary AE signals to verify the correct operation of AE sensors, preamplifiers and AE systems ...
-
Manufactured by BBM Akustik Technologie GmbHbased in GERMANY
Our insulating pads are used wherever acoustic and thermal emissions have a marked influence on the surroundings. Due to the installation-friendly design of the insulating pads you can carry out installation independently without tools so that no outside intervention in your processes is necessary. The version of our pads is available with ...
-
Manufactured by Develogicbased in GERMANY
The develogic Sono.Vault acoustic recorder and signal analyzer is designed for long- term recording and monitoring of marine acoustic emissions. Driving design parameters during development were energy-efficiency, premium recording quality, application flexibility and ruggedness. The system is able to record acoustic signals ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
Air Emissions and Acoustic compliance technologies for both diesel and natural gas engines in stationary, marine and rail applications. Engineered solutions for NOx, CO, PM and VOC emissions to meet every regulatory requirement in the ...
-
Manufactured by Valcom,a Brand of TERRANOVAbased in ITALY
freely without any interference. If liquid covers the rod the emission of acoustic waves is muffled and this interference is picked up by the piezoelectric sensor and converted into an on-off signal. These instruments have no moving parts, no vibration, no optical or capacitive detectors. They are pure static instruments offering the maximum ...
-
Manufactured by Physical Acoustics Corporation (PAC)based in USA
The 0/2/4 is a voltage preamplifier with switch-selectable gain ranges of 0, 20, and 40 decibels. The 0/2/4, along with the 2/4/6, represent Physical Acoustics’ premium series of general purpose preamplifiers, meant for laboratory use when the gain or frequency bandwidth needed for the application is not known in ...
-
Manufactured by Settima Meccanica Srlbased in ITALY
The world's first no noise helical rotor pump invented, patented and produced by Settima Meccanica. Continuum® represents the no noise alternative to gear and vane pumps. Ideal for high pressure ...
-
Manufactured by City Machine & Welding, Inc.based in USA
CMW is a world leader in design, fabrication & requalification of compressed gas transportation equipment also known as "tube trailer". Tube trailers manufactured by CMW are optimized for maximum payload. Our trailers and chassis are designed in such a way that the weight distributions on the axles are optimized for the bridge law requirements. CMW is accredited by various national and ...
-
Manufactured by Settima Meccanica Srlbased in ITALY
Dry screw pumps designed and manufactured in accordance with API676 (3rd edition) also available for high flow ranges (up to 4900 L/min) ...
-
Manufactured by Baruffaldi Plastic Technology Srlbased in ITALY
The hydraulic cable duct punching machines POVI 10000 and POVI 5000 are the only plants in the world designed to reach process speeds of up to 12 m/min. with the highest quality standards. They are designed and manufactured to produce PVC and PC/ABS electrical cable ducts and trunkings according to the standard punching patterns required by the market. ...
-
Manufactured by Senseven GmbHbased in AUSTRIA
Leaking valves were yesterday: 5-10% of valves in industries are leaking ...
-
Manufactured by Rtec Instrumentsbased in USA
The state of the art fretting wear tester has industry leading specifications on stroke and frequency. Controlled stroke from 5 micron at 500 hZ frequency across a wide temperature range makes it an ideal fretting wear testing for both industry and university ...
-
Manufactured by Rtec Instrumentsbased in USA
The state of the art Rtec CMP tester CP-6 allows to study and characterize CMP process like never before. In addition to polishing wafers & substrates the tester comes with inline surface profilometer. This combinations sheds information on why and how the surface, friction, wear etc. changed. Tester also measures several inline parameters such as friction, surface roughness, wear volume etc. ...
-
Manufactured by Rtec Instrumentsbased in USA
Fretting wear tester module is used across wide applications ranging from materials, lubricant, grease, coating etc. testing. The state of the art fretting module has industry leading specifications on stroke and frequency. Controlled stroke from 5 micron at 500 hZ frequency across a wide temperature range makes it an ideal fretting wear material property tester for both industry and university ...
-
Manufactured by EnergyLink Internationalbased in CANADA
Selection of the correct catalyst is critical to meeting performance guarantees, while optimizing the system design. At EnergyLink International, we are there right from the start. Through relationships with all key catalyst suppliers, an in-house team with proven catalyst system project experience and complete technical and operational knowledge of all critical selection variables, we can work ...
-
Manufactured by Kabelwerke Villingen GmbH (KWV)based in GERMANY
Excellent process reliability through high quality standards. We can be taken seriously as a partner only if we can guarantee excellent process reliability. We are keenly aware of this fact and we meet the challenge by enforcing the highest quality standards found anywhere in the cable ...
-
Manufactured by Develogicbased in GERMANY
HAM.BASE, the develogic hydro acoustic modem, is a powerful and reliable underwater communication system. It is designed to meet the requirements of research and exploration, established in various subsea communication ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you