acoustic emission Equipment in USA

Durr Universal - Model https://www.durr-universal.com/en - Prepared for Tomorrow's Acoustic and Emission / Filtration Systems

Durr Universal - is a global provider of custom-engineered ancillary equipment and solutions to the power generation, oil and gas, industrial processing, rail transportation and backup power markets. For more than half a century, OEMs, EPCs, packagers and end-users have relied on Universal to engineer ...

By North Monsen Company Office in Salt Lake City, IDAHO (USA).

FieldCAL - Handheld AE Signal Generator

So how do you make sure all your new and existing Acoustic Emission products are calibrated and performing at maximum capacity –- the FieldCAL. MISTRAS' low-cost, hand-held AE signal generator is battery-powered and can produce all the necessary AE signals to verify the correct operation of AE ...

By Physical Acoustics Corporation (PAC) based in Princeton Jct, NEW JERSEY (USA). from Calibrators Product line

Model PKWDI - 200-1000 kHz Wideband Differential Integral Preamp AE Sensor

The PKWDI sensor is a wideband frequency, acoustic emission sensor with an integral, ultra low noise, low power, filtered, 26dB preamplifier, which can drive up to 200 meters of cable. This sensor represents an improvement in both noise and low power consumption performance, with noise level below 3 µV and ...

By Physical Acoustics Corporation (PAC) based in Princeton Jct, NEW JERSEY (USA). from Differential Product line

CaviMeter and CaviSensor - Acoustic Cavitation Meter (Preliminary)

Ideal for measuring acoustic cavitation in ultrasonic wafer cleaning tanks, the CaviMeterTM was developed by the National Physical Laboratory (NPL) to measure the acoustic emissions generated by cavitation. Cavitation is the growth, contraction, and collapse of micro-bubbles (or cavities) within a liquid ...

By Onda Corporation based in Sunnyvale, CALIFORNIA (USA). from OndaSonics Product line

Stationary Engines

Air Emissions and Acoustic compliance technologies for both diesel and natural gas engines in stationary, marine and rail applications. Engineered solutions for NOx, CO, PM and VOC emissions to meet every regulatory requirement in the ...

By Catalytic Combustion Corporation (CCC) Office in San Jose, CALIFORNIA (USA). from Power Generation Catalyst Product line

Model 0/2/4 - Switch Selectable Gain Single Ended and Differential Preamplifier

The 0/2/4 is a voltage preamplifier with switch-selectable gain ranges of 0, 20, and 40 decibels. The 0/2/4, along with the 2/4/6, represent Physical Acoustics’ premium series of general purpose preamplifiers, meant for laboratory use when the gain or frequency bandwidth needed for the application is not ...

By Physical Acoustics Corporation (PAC) based in Princeton Jct, NEW JERSEY (USA). from Preamplifiers Product line

Rtec - Fretting Wear Tester Module

Fretting wear tester module is used across wide applications ranging from materials, lubricant, grease, coating etc. testing. The state of the art fretting module has industry leading specifications on stroke and frequency. Controlled stroke from 5 micron at 500 hZ frequency across a wide temperature range makes it an ideal fretting wear material property tester for both industry and university ...

By Rtec Instruments based in San Jose, CALIFORNIA (USA).

Rtec - Model CP-6 - Chemical Mechanical Polisher

The state of the art Rtec CMP tester CP-6 allows to study and characterize CMP process like never before. In addition to polishing wafers & substrates the tester comes with inline surface profilometer. This combinations sheds information on why and how the surface, friction, wear etc. changed. Tester also measures several inline parameters such as friction, surface roughness, wear volume etc. ...

By Rtec Instruments based in San Jose, CALIFORNIA (USA).

EmiControls - Model V7 - Dust Abatement Sprayers

The V7 is the the V12 dust controller’s little sister. The patented nozzle head on the V7 is fitted in the axial direction in the turbine and achieves a much higher projection range than comparable nozzle configurations. It has a booster pump and can therefore also be used with the turbine switched off. The user-friendly remote control system, the 52° tilt angle, 360° pivoting angle ...

By EmiControls Distributor in WEST VIRGINIA (USA). from Emissions Control Product line

EmiControls - Model V12SM - Dust Abatement Sprayers

excessive water motion. The power generator mounts an engine with emission Level 3A and delivers 60 kVA, so as to ensure proper operation of the ...

By EmiControls Distributor in WEST VIRGINIA (USA). from Emissions Control Product line

Rtec - Fretting Wear Tester

The state of the art fretting wear tester has industry leading specifications on stroke and frequency. Controlled stroke from 5 micron at 500 hZ frequency across a wide temperature range makes it an ideal fretting wear testing for both industry and university ...

By Rtec Instruments based in San Jose, CALIFORNIA (USA).

EmiControls - Model L3 - Dust Abatement Sprayers

The L3 lance is the first dust-control lance on the market. It is a compact and user-friendly solution for close-range applications. It works without a turbine, allowing it to get near to the source of dust. The spray action can be narrow and flat, fan-shaped or cylindrical, depending on the requirements in any given case. With its flexible spray head, the fine mist jet with its optimized droplet ...

By EmiControls Distributor in WEST VIRGINIA (USA). from Emissions Control Product line

EmiControls - Model V22 - Dust Abatement Sprayers

The new and restyled V22 is the most powerful dust-suppression machine in EmiControls’ product range. Due to its long projection range and integrated 350° pivot function, it is most suitable for dust-control applications covering large areas. The patented nozzle head and the outer nozzle ring generate a finely atomized mist, which binds the dust particles and prevents them from ...

By EmiControls Distributor in WEST VIRGINIA (USA). from Emissions Control Product line

EmiControls - Model V12S - Emissions Control Unit

The fully-automatic V12S offers a universal, powerful and super silent environmentally-friendly dust control solution. The high-performance turbine with linear injection geometry of the water is an optimal solution for very precise throw. The turbine has the ability to run at 2 speeds giving the turbine the flexibility to throw the atomized water from 10 meters to over 50 meters. Special nozzles ...

By EmiControls Distributor in WEST VIRGINIA (USA). from Emissions Control Product line

Commercial Nuclear

Precision Custom Components, LLC (PCC) is a world leader in the manufacture of spent nuclear fuel containers and equipment. Our value-based engineering and demanding quality standards yield the best results even with challenging projects, both domestic and ...

By Precision Custom Components based in York, PENNSYLVANIA (USA).

EmiControls - Model V12 Odor - Turbine Unit for Odour Control

V12 Odor is the name of a turbine unit developed specifically to combat foul smells. The nozzles generate a fine mist which is distributed over large areas by the turbine. Measured amounts of biological substances are added to prevent the release of unpleasant smells. With a projection range of 50 m, it can also inhibit nuisance smells in large-scale complexes. The pivot function integrated in ...

By EmiControls Distributor in WEST VIRGINIA (USA). from Emissions Control Product line

VAW Systems - Industrial Enclosures

Many industrial fans and related equipment (engines, vacuum dust collectors, pumps, coolers) require significant noise reductions from casing radiated sound emissions. VAW Systems designs and builds high performance acoustic enclosures and barrier systems that will meet both occupational noise limits and ...

By VAW Systems Ltd. Distributor in Louisville, KENTUCKY (USA). from Industrial Division Product line

VAW Systems - Sound Enclosures

VAW Systems Enclosures are designed for Industrial and Turbine Equipment that require significant noise reductions from casing radiated sound emissions. VAW Systems designs and builds high performance acoustic enclosures and barrier systems that will meet both occupational noise limits and environmental ...

By VAW Systems Ltd. Distributor in Louisville, KENTUCKY (USA). from Turbine Division Product line

ABS - Cavitation Suceptibility Meter

Research & Development at Dynaflow, Inc. has yielded a new product, the ABS Cavitation Susceptibility MeterTM (ABS-CSMTM) based on an acoustic technique to generate and measure cavitation inception in a liquid. This product is now offered to users to enable quantification of the cavitation susceptibility, ...

By Dynaflow, Inc. based in Jessup, MARYLAND (USA).

Commercial Industrial

Precision Custom Components, LLC (PCC), has the know-how and manufacturing capabilities to build more than just heavy walled vessels. The products are highly engineered components enhanced by specialized welding techniques that PCC has developed. Vessels are a strong suit with us, but we have done much more for our customers in the high-pressure industrial sector, especially with unique, or ...

By Precision Custom Components based in York, PENNSYLVANIA (USA).