Only show results in Virginia? Ok

acoustic test equipment

  • Acoustic Ullage Testing System

    The acoustic ullage test is based on sound. A recording of internal sounds are made from within the tank before pressure\vacuum is applied. Then while under pressure\vacuum a second recording is made and compared with the first recording. If a leak is present a difference in sound will be noticed and recorded. This is also confirmed with loss of ...

    By Tanknology Canada Inc. based in Burlington, ONTARIO (CANADA).

  • Premium

    Acoustic Ceilings

    Used as fleece backings for the tiles on plasterboard, wood and metal acoustic ceilings, our nonwoven materials are available in a variety of hole sizes and open areas.

    By Ahlstrom-Munksjö based in Helsinki, FINLAND. from Acoustic Ceilings Product line

  • Premium

    AquaTest T10 - Robust Test Rod for Electro-Acoustic Water Leak Detection Outdoors

    The AquaTest T10 is a test rod with innovative technology and ergonomic design. Its strength lies in the prelocation of leaks in water pipe networks. The AquaTest T10 is the first test rod made by SEWERIN for which no additional receiver is required. The headphones are activated not by any common key but by a special sensor area. The noises that ...

  • Acoustical - Turnkey Noise Control Systems

    Acoustical Systems, Inc. is one of the few companies with the capability to offer single source turnkey noise abatement programs. Turnkey projects include: Acoustical Testing, Acoustical Engineering Analysis, Detailed Design, Material Procurement and System Fabrication, Installation Services, Guaranteed Verified Results, Total Program Management.

    By Acoustical Systems, Inc. based in Vandalia, OHIO (USA).

  • IAC Acoustics - Acoustic Enclosures

    In industrial environments, reverberation and reflected noise from machinery can easily exceed statutory limits and cause a serious health risk to production staff. Acoustic enclosures from IAC reduce noise pollution from noisy plant and machinery without reducing the efficiency or cleanliness of the plant during normal operations.

    By IAC Acoustics based in Winchester, UNITED KINGDOM. from Acoustic Enclosures Product line

  • GP - Model ISO-TEST - Edge Isolation TE Sting for Wafers

    Situation: After diffusion (standard or one-sided), there is usually a parasitic emitter present on the rear side of the cell, which is interconnected with the front across the edges. Application of cell contacts without accounting for the parasitic emitter leads to low parallel resistances, often completely shunted cells. For edge isolation, ...

    By GP Solar GmbH based in Neuried, GERMANY. from Edge Isolation TE Sting for Wafers Product line

  • Vibro-Acoustics - Film-Lined Silencers

    Indoor air or environmental quality concerns often mandate the use of barrier materials such as polymer films to ensure no fibrous media particles are drawn into the airstream or that nothing in the airstream is embedded in the media. Vibro-Acoustics’ film-lined silencers include film-lining between the acoustical media and the perforated ...

    By Vibro-Acoustics based in Markham, ONTARIO (CANADA). from Film-Lined Silencers Product line

  • IAC Acoustics - HVAC Silencers

    IAC Acoustics rectangular and cylindrical duct attenuators provide effective, predictable noise reduction at substantial savings over other noise reduction methods because IAC products are laboratory-developed and tested under controlled conditions. Moreover, we manufacture duct silencers to specific metal tolerances and with controlled acoustic ...

    By IAC Acoustics based in Winchester, UNITED KINGDOM. from HVAC Silencers Product line

  • Pulsar - Model 105 and 106 - Acoustic Calibrators

    Models 105 and Model 106 are a new technology acoustic calibrator that has been tested and formally EU Pattern Approved under certificate PTB-1.61.4028829, as meeting all of the requirements of the latest International standard, IEC 60942: 2003. This version of the IEC standard is far more stringent than previous versions and so far very ...

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM. from Acoustic Calibrators Product line

  • Acoustic Enclosures

    The 'Whisper' Generator Enclosure has been specially designed for noise critical environments such as hospitals, construction sites, music festivals and outside broadcasts. Working in conjunction with Ground Power Ltd (Generator and Power Supply Specialists), Sound Planning have designed and tested the 'Whisper' Enclosure with extremely successful ...

    By Sound Planning Limited based in Lower Bourne, UNITED KINGDOM.

  • Architectural Acoustic

    We can visit your facility or work from drawings and specifications. With a full range of architectural products, fabrics and colors, we can assist you in achieving the acoustical and aesthetic outcome required. The following list represents only a fraction of our wide range of architectural and commercial offerings. Acoustical Doors and Windows. ...

    By NEVA Associates based in Newburyport, MASSACHUSETTS (USA).

  • Acoustic Doors

    Acoustic doors are an essential component in providing a room that is well insulated acoustically. Doors and door-frames are often the weakest links in sound transmission from and into the room. Acoustic doors are typically constructed from multiple layers of a variety of materials. The different layers contribute to the attenuation of sound ...

    By Acoustics Hellas based in Spata, GREECE.

  • Acoustic Enclosures

    With over 700 acoustical enclosures installed worldwide and a 100% successful delivery and performance record, Innova’s acoustic equipment enclosures are available whenever and wherever you need them - and at affordable prices.

    By Innova Global Limited. based in Cambridge, ONTARIO (CANADA). from Acoustic Enclosures Product line

  • Model AL1 - Acoustic Analyzer

    The Acoustilyzer AL1 is the predecessor of the XL2 Audio and Acoustic Analyzer. It is a handheld sound level meter and acoustic analyzer for measuring and monitoring sound pressure level, room acoustics and, optionally, speech intelligibility STIPA. Additionally it offers basic audio measurements.

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • ProCoustic - Acoustical Coating

    ProCoustic is a high quality acoustical coating originally developed to restore aged and discolored but still structurally sound ceiling tiles. With an exceptional Class A fire rating (Flame Spread 5, Smoke Development 5) and excellent acoustical properties, ProCoustic can now be spray applied to both Rockwool Premium Plus and FireStopTB to ...

    By American Rockwool Manufacturing, LLC based in Plano, TEXAS (USA).

  • Building Acoustics

    For acoustic buildings guaranteed to meet your noise emissions compliance targets, Innova has been the supplier of choice for over 20 years across multiple industries and in 34 countries around the globe.

    By Innova Global Limited. based in Cambridge, ONTARIO (CANADA). from Building Acoustics Product line

  • Acoustic Analyzers System

    We provides detailed dialog and consultative review for applications involving test, quality control/assurance, end-of-line testing and vibro-acoustic troubleshooting. We provide on-site measurement and training.

    By ANV, LLC based in Prior Lake, MINNESOTA (USA).

  • Emtec - Acoustic Door Systems

    Emtec Acoustic Doors are double skinned metal doors specifically designed to provide optimum noise reduction combined with ease of operation.Typical applications of the Emtec range of acoustic doors are to permit access into areas such as,Turbine or Diesel Engine Test Cells, Generator Plantrooms, Ventilation or Air-Conditioning Plantrooms, Plenum ...

    By Emtec Products Ltd. based in Middlesex, UNITED KINGDOM. from Acoustic Door Systems Product line

  • Sonofoam - Acoustic Foam Panels

    SONOFOAM acoustic panels are manufactured primarily in open cell polyurethane foam not releasing any kind of volatile particles according to the VOC tests. Additionally can be added components on SONOFOAM foams with the aim to make it more resistant to fire for more demanding cases. In extreme cases where it is intended a even higher fire ...

    By Sonic, SA based in PORTUGAL.

  • Acoustic Anechoic Chambers

    We are counted amidst the dependable, Acoustic Anechoic Chamber Manufacturers, in India. We are leading specialist in design of  Anechoic and Semi-Anechoic test rooms. Acoustic Anechoic Chambers are commonly used in acoustics to perform experiments in nominally free field conditions. This means that all sound energy will be traveling away ...

    By Envirotech Gensets Pvt. Ltd. based in Noida, INDIA. from Acoustic Anechoic Chambers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you