Activated Sludge Tank Equipment In USA
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
INVENT E-FLEX is the ideal aerator for municipal and industrial treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial treatment ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Sensor for the measurement of dissolved oxygen in the ppm range in water treatment technology. Precise oxygen measuring cell with integrated temperature measuring. Automatic monitoring of diaphragm integrity and electrolyte exhaust. Easy calibration, excellent life time (up to 2 years of operation between refilling in activated sludge ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The INVENT iDISC has been developed and optimized for the use in municipal and industrial wastewater treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge ...
-
based in USA
The MTS Aspirator provides oxygen transfer by aspirating the ambient atmospheric air, eliminating the need for air blowers. Installation is plug-and-play. The MTS Aspirator is perfect for sludge holding tanks, aerobic digesters, activated sludge tanks, storage tanks, equalization basins, ...
-
Manufactured by A&V Envirotech, a division of A&V, Inc.based in USA
and add directly to waste stream, influent flow of activated sludge tank, or aerobic pond. Optimum results will be achieved with aeration and with extended detention times. The facts concerning each potential application should be analyzed to determine proper initial application rates and a procedure for establishing minimum effective ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
he XTA and XTAK are self-aspirating submersible aerators for wastewater and water treatment in municipal and industrial plants. Main areas of application are mixing and equalization tanks, activated sludge tanks, SBR, and sludge storage tanks at water depths from 2 to 9 m (7–30 ...
-
Manufactured by CDE Groupbased in NORTHERN IRELAND
The S:MAX range of equipment solutions are high efficiency wet screening systems applied where there is a requirement for efficient liquid/solid separation. The S:MAX range can be applied to process a variety of materials including: Raw Sludge, Surplus Activated Sludge, Septic Tank Sludge, Digester Feed ...
-
Manufactured by Walker Process Equipmentbased in USA
The Walker Process SightWell collector is designed to provide quick and uniform withdrawal of return and waste activated sludge from final settling tanks before the sludge becomes anaerobically degraded. Because modern plant designs incorporate high solids loadings in mixed liquor, rapid removal of oxygen-rich ...
-
by Waterleaubased in BELGIUM
The BIOTIM aerobic wastewater treatment technology is our conventional and proven-concept aerobic wastewater treatment system. This solution is a turn-key and fully integrated biological wastewater treatment system in which the secondary or biological treatment step in the water treatment process consists of an activated sludge reactor ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Exceptional mixing performance for both low and high solids concentration solutions. Intensive, low-energy, 360 - degree mixing pattern and totally non-clogging ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Multi-purpose, multi-directional, submerged mixer ideal for general mixing and flow generation; adaptable to many tank configurations. Open, dual helical impeller providing intensive; directional sub-surface mixing pattern with minimal surface disturbance and low power to volume ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Grit removal is a prerequisite of wastewater treatment. It prevents buildup in process chambers, and erosion of equipment in the primary treatment works. The J+A Jeta® grit trap is a high performance, compact grit removal unit. With its sloping sides and specially designed impeller, it provides maximum separation of heavy mineral solids (grit) while rejecting lighter organic solids. The Jeta ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
E-FLEX - FLOAT is the floating version of our proven E-FLEX- Aaeration System. It is mainly used for aerated wastewater ponds or lagoon tanks with plastic liner, earthen basins with natural sealing, natural ponds and lakes and all aerated tanks, in which the levelling of conventional bottom aerators is only possible with considerable effort ...
-
Manufactured by Fluence Corporationbased in USA
This uniquely designed aerator provides oxygen from the bottom up without the need for an external blower, providing 360-degree radial mixing. The Hurricane submersible aerator’s 360-degree radial mixing system incorporates new, unique air diffusers for high oxygenating efficiency and thorough mixing over a wide ...
-
Manufactured by Water Tech, Inc.based in USA
Water Tech was founded in 1990 to provide integrated waste water treatment solutions for the food processing industry. Our ability to independently evaluate complex waste water challenges and provide effective combinations of chemical, mechanical, or biological solutions is the back bone of our success. Our experienced technicians will customize a solution for the challenges posed in treating ...
-
Manufactured by Mixing Systems, Inc.based in USA
Aerobic digester at municipal plant in Ohio using eddy jet ...
-
Manufactured by DAS Environmental Expert GmbHbased in GERMANY
Without chemical or physical processes, many substances could not be removed from wastewater. Depending on the wastewater’s composition, the process for chemical-physical wastewater treatment comprises several sub-steps. Often efficient solutions can only be achieved by combining those different process steps in the right ...
-
Manufactured by Kubota Membrane Europe Ltd.based in UNITED KINGDOM
is applied to multiple wastewater treatment processes including domestic/rural, sewage and industrial all over the world. The flow pattern across the membrane is a cross-flow type, separating the mixed liquor into permeate (treated water) and activated sludge. The membrane unit consists of a diffuser case and a membrane case (membrane ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you