adiabatic cooler equipment
-
Adiabatic Cooler / Condenser
The cooler operation is automatically controlled by an electrical control panel provided with factory-programmed PLC according to required mode of ...
By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line
-
MITA - Model PAD-V - Adiabatic Cooler to Cool Liquids
Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Suitable for both industrial and HVAC fields of ...
By MITA Cooling Technologies S.r.l. based in Siziano (PV), ITALY. from Adiabatic Dry Coolers and Adiabatic Condensers Product line
-
Model eco-Air Series - V-Configuration Adiabatic Cooler
Unlike other adiabatic products currently on the market, the EVAPCO eco-Air Series units are 100% fully rated. Every eco-Air unit comes with EVAPCO’s exclusive 100% thermal performance guarantee, ensuring peace of mind in selecting the ideal cooling solution for your ...
By Evapco Inc. based in Westminster, MARYLAND (USA). from Closed Circuit Coolers Product line
-
CEE - Adiabatic Water Coolers
Carter adiabatic coolers do not create an aerosol or wet the surface of the coil. Adiabatic cooling is achieved by mains water distributed over an evaporative cooling media through which the incoming air passes through. The cooled dry air then passes onto the coil for cooling. This method in turn prolongs the ...
By Carter Environmental Engineers Limited based in Birmingham, UNITED KINGDOM. from Water Cooling Product line
-
EAS - Adiabatic Dry Cooler
Dry coolers products with adiabatic cooling pads, are designed to permit the most flexible, economical and hygenically safe cooling system available today. The product allows for cost effective dry cooling during applicable temperatures combined with economic precooling of the entering air to achieve ...
By Evapco Air Solutions a/s based in Aabybro, DENMARK. from Dry Coolers Product line
-
MITA - Model PAD-VR - Adiabatic Condenser for Gas Condensing
Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Both HVAC and refrigeration sectors can be ...
By MITA Cooling Technologies S.r.l. based in Siziano (PV), ITALY. from Adiabatic Dry Coolers and Adiabatic Condensers Product line
-
Adiabatic Dry Cooling Towers
temperature l. Such substantial Depression of the dry bulb temperature of the air Results in a major increase in dry cooling capacity. The pre-cooler is constructed in stainless steel, with water distribution piping and a gutter system to drain The water once-through to the sewer m. Part of the Distributed water is ...
By Classik Cooling Towers based in Coimbatore, INDIA.
-
Eurofill - Model Europad - Humidifying Pack Used Humidification Section of Air Handling Unit
The humidifying pack is used as humidification section of air handling units and in adiabatic coolers. It is made of absorbent cellulose sheets impregnated of resin that as well as contributing to its consistency and self carrying capacity, protect it from decomposition and inhibit the formation of mould. The ...
By Eurofill Energy & Water srl based in Biassono (MB), ITALY. from Humidifying Panels Product line
-
Franco - Roof Cooler
The Roof Cooler is a compact and versatile adiabatic cooler for a wide range of industrial, commercial, agricultural and livestock spaces. It is an environmentally friendly solution that works with the principle of evaporation, thus ensuring great performance and low ...
By Franco S.r.l. based in Cervasca (CN), ITALY. from Cooling - Pad Cooling Product line
-
Franco - Win Cooler
Win Cooler is the wall-mounted adiabatic cooler for smaller rooms. It works with the principle of water evaporation which makes it extremely ecological and economic. Thanks to the materials with which it is built it can operate in all sorts of environments, from the agricultural and livestock sector to ...
By Franco S.r.l. based in Cervasca (CN), ITALY. from Cooling - Pad Cooling Product line
-
Cryo - Gas Cooler
CO2 Adiabatic dry coolers were designed to achieve an optimized exchange of thermal energy between air and a refrigerant or fluid. In order for the dry cooler to work, the air temperature needs to be cooler than water in the system. To cool the system liquid, hot process liquid flows through the dry cooler ...
By Cryo Systems Refrigeration Equipment Co., Ltd. based in Guangzhou, CHINA. from Refrigeration Unit Product line
-
Model Adiabatic subcooler - Alchemist
The adiabatic subcooler Alchemist is an efficient solution to HFC cooler systems updates in order to increase the efficiency of CO2 cooling systems. The adiabatic cooling process: the air is moistened before coming into contact with the coil in order to lower the temperature and increase the efficiency of the ...
By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN.
-
AD Small - Model Premium Series - Evaporative Cooler 5500-15000 m3 / h
Evaporative air coolers series PREMIUM AD SMALL are teams with centrifugal fan for cooling air any commercial, industrial or agricultural ...
By MET MANN based in Manlleu, SPAIN. from Adiabatic Cooling Product line
-
CEE - Cabero Adiabatic, Air Blast And Hybrid Coolers
Carter Environmental Engineers work with Cabero to offer a range of innovative hybrid cooling systems to our customers. CEE have teamed up with Cabero one of the leading producers of heat exchangers for refrigeration and air-conditioning technology, to provide our customers with a defined, optimum and complete or individual solution with specifically developed software, naturally including a ...
By Carter Environmental Engineers Limited based in Birmingham, UNITED KINGDOM. from Water Cooling Product line
-
BAC - Model SP - Spartium Cooler
SpartiumCoolers fit on standard trucks. Pre-coolers are factory-installed and small cranes are all you need to mount coolers ...
By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Dry and Adiabatic Cooling Product line
-
BAC - Model DFCV-AD - Cooler
Pads in front of the finned coil pre-cool air to virtual wet bulb temperature. Up to 40% improved capacity compared to dry cooling. TrilliumSeries coolers consume less energy. TrilliumSeries coolers achieve low process temperatures. Try the cooler with EC motor and improved pre-cooler performance resulting in ...
By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Dry and Adiabatic Cooling Product line
-
Model eco-Air Flat Series - Industrial Dry Cooler
The location of dry and adiabatic cooling equipment is an important consideration when reviewing system design. Since air cooled equipment requires large quantities of air, adequate spacing around the unit must be provided for each unit to perform properly. An equally important consideration when laying ...
By Evapco Inc. based in Westminster, MARYLAND (USA). from Closed Circuit Coolers Product line
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you