Aerated Grit Equipment
-
Manufactured by Claro Incbased in CANADA
Claro aerated grit extraction spiral systems fully-automate the extraction of grit slurry from municipal aerated grit settling tanks. Consisting of a special alloy shaftless spiral, a trough, special low-friction liners, a proprietary liquid seal, a gear drive, and submersible electronic motion sensors, our ...
-
Manufactured by WSG & Solutions, Inc.based in USA
The Link-Belt Type AS Grit Collector is designed for small plants with flows up to 10 MGD. The unit consists of a hopper with an inclined screw and grit washer for removing and washing grit. Air is provided to maintain uniform velocities at all flows. The unit uses compressed air through diffusers to create and maintain circulating ...
-
Manufactured by WSG & Solutions, Inc.based in USA
aerators which provide maintenance accessibility to diffuse without draining the grit chamber. For flows greater than 20 MGD, or grit loadings over 124 cu ft / hr, the unit can also be furnished with a separate screw drive on the lower grit screw to accommodate the higher grit volume. ...
-
PremiumManufactured by Sauereisen Inc.based in USA
an impermeable, high-strength, corrosion resistant lining for manholes, lift stations, grit chambers, aeration basins and related structures subject to infiltration and attack from hydrogen sulfide and acid generated by microbiological ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
-
Manufactured by Claro Incbased in CANADA
Claro aerated grit extraction spiral systems fully-automate the extraction of grit slurry from municipal aerated grit settling tanks. Consisting of a special alloy shaftless spiral, a trough, special low-friction liners, a proprietary liquid seal, a gear drive, and submersible electronic motion sensors, our ...
-
based in BANGLADESH
Wastewater treatment process. Coarse screens or bar racks: (1) removes large objects, rags, debris ; (2) protects downstream pumps, valves, pipelines ; (3) cleaning may be accomplished manually or mechanically ; (4) mechanically cleaned bar racks typically used instead of coarse manually cleaned screens ; (5) bar rack is inclined to facilitate , cleaning ; (6) approach velocities should ensure ...
-
Manufactured by WTP Equipment Corp.based in CANADA
Automatic conveyor systems for grit removal from continuous or batch wastewater flows – shafted or shaftless grit conveyor screws for submerged duty in horizontal aerated grit tanks or as an inclined grit collector – with the drive unit located outside the tank for easy ...
-
Manufactured by H+R Environmental ENG`G. Co., Ltd.based in TAIWAN
Aerated Grit and Grease Removal Equipment will be installed and traveling on the rectangular tank. By forced aeration, the grease and scum will be floated to liquid surface then skimmed to grease/scum pit for further treatment by surface skimmer. The organics attached on the solids will be detached by aeration. The ...
-
Manufactured by WesTech Engineering, LLCbased in USA
The Shafted Grit Screw Classifier is a grit conveying and dewatering unit which typically receives grit slurry from a Vortex Grit Separator, an Aerated Grit Chamber, or a Grit Collector. The Shafted Grit Screw Classifier settling tank is designed to effectively ...
-
Manufactured by EnviroChem Services (OPC) Private Limitedbased in INDIA
Type: Detritus / Aerated / Vortex. Grit Size: 0.5 to 2.0 mm. Features: - Compact, Robust, & Stable, Organic Return & Grit Classifier. MOC: RCC / MSEP / MSRL / SS. Mode: Automatic / Semi-Automatic / Manual. Flow: 100 to 10,000 ...
-
Manufactured by AMWELL - A Division of McNish Corporationbased in USA
Efficient removal of abrasives is essential to the prevention of wear and damage to mechanical equipment. AMWELL manufactures both aerated and non-aerated grit removal systems to handle any need. Several combinations of chain and flight collectors, dewatering screws, chain and bucket collectors, elevators, airlift pumps and circular ...
-
Manufactured by Claro Incbased in CANADA
Claro is pleased to offer a high quality grit washer that washes and dewaters sediment extracted from various types of grit collection equipment including sewage treatment plant aerated grit chambers. Vibration and water jets thoroughly wash organics off of the collected grit and sand. Resultant ...
-
Manufactured by HC Flourish Industry Group Co., Ltd.based in CHINA
QXS bridge sand suction machine is mainly used for sand water treatment of urban sewage treatment plant or tap water aeration grit chamber to lift the sand particles, cinders and other large particles at the bottom and sewage mixture to the sand discharge tank beside the tank: oil and slag handling devices can be added according to ...
-
Manufactured by Hydria Water ABbased in SWEDEN
VA Teknik’s grit trap scrapers are based on the same principal as our well-known plastic chain & flight scrapers, which have been on the market for over 40 years. We have successfully installed chain & flight scrapers in aerated grit traps using our plastic chain and stainless steel scraper flights. Besides excellent ...
-
Manufactured by Kuhn Technische Anlagen GmbHbased in GERMANY
The KUHN KSW-S/RW grit washer and separating machine is predominantly used for the treatment of sediment from aerated municipal grit chambers. Using a conveyor, “dry” loading of bulk material can also occur from a silo, screw classifier or compact system using the special KSW-T construction. In this respect, many industrial as ...
-
Manufactured by Claro Incbased in CANADA
Claro provides a selection of high quality pumps including: Chopper pumps. Recirculation pumps. Aerator pumps. Grit/slurry pumps. Self-priming grit slurry pumps. Vertical wet pit pumps. Dry pit solids handling pumps. Submersible solids handling pumps. Sludge pumps. Vortex pumps. Ni hard vortex pumps. Severe duty cup type recessed impeller ...
-
Manufactured by Jäger Umwelt-Technik GmbHbased in GERMANY
For special applications our product portfolio also includes coarse-bubble aerators. The JetFlex® CBD SS is available as stainless steel tube aerators. Used in the grit chamber of a sewage treatment plant, in sludge stabilization basins or as post-aeration, they offer the possibility of passing large air volumes and thus ...
-
Manufactured by WSG & Solutions, Inc.based in USA
it is deposited into a SW Grit Washer, screw conveyor, belt conveyor, or discharge receptacle. The C&B Grit Collector can also be designed with the Gritreat System for grit chamber aeration. The REX® Gritreat assures positive flow control for predictable grit quantity and quality. ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
StreamLine is EDI’s patented configuration with unmatched system simplicity. Resulting in up to 33% reduction in system installation time compared to competing panel systems. Plus, membrane replacement can be completed in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you