Only show results available in Connecticut? Ok

aeration rotor equipment

  • Premium

    Landustrie Landy - Wastewater Aeration Systems

    In the field of surface aeration Landustrie has a long history and broad experience. Landustrie designs, manufactures, supplies, installs and maintains many types of aeration systems, with either surface aerators, aeration rotors, diffusers and Landox flow boosters. Since the introduction of our own full-scale aeration test tank and the ...

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Wastewater - Aeration Systems Product line

  • Premium

    Landustrie Landy - Brush Aerators

    For simple and efficient aeration in municipal and industrial wastewater treatment plants Landustrie supplies two standard aeration rotors: Landy 700 and Landy 1000 resp. with aeration capacities of 54 kgO 2/h and 85 kgO2/h with maximum rotor lengths of 9 m. At special request of our clients these rotors can be supplied with other dimensions as ...

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Wastewater - Aeration Systems Product line

  • Premium

    ASTIM - Model BRS - Horizontal Brush Aerators

    Brush aerators are cost effective solutions for the oxidation ditches and carrousel systems, for which nitrification and denitrification is carried out in the same tank volume without any additional tank and pumping. They can also be used in compact plants in annular aeration tanks, surrounding the circular clarifiers. Brush type aerator had a ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Aeration Product line

  • Premium

    Fluence MONSOON - Paddle-Wheel Aerators

    Individually or in groups, MONSOON floating paddle-wheel aerators develop large flow patterns and produce strong horizontal mixing and high oxygen transfer for oxidation of ditches, lagoons, and tanks. Available models range in speeds of 5 to 30 horsepower (3.75 to 22.5 kilowatts).

    By Fluence Corporation based in White Plains, NEW YORK (USA). from Aeration Equipments Product line

  • Premium

    Landustrie Landox - Flow Boosters

    In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration system.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Wastewater Product line

  • Fixed Mixers

    Fixed mixers are applied for mixing operations of at least one liquid phase. These mixers use a gearbox to reduce motor speed to turn a large diameter aeration rotor and have a long trouble-free life due to their low speed.

    By Mojan Engineering Co. based in Tehran, IRAN.

  • Low Speed Surface Aerator

    Mechanical surface aerators facilitate dissolution of air into wastewater by vigorously stirring up the water in it’s contact. Low speed aerators use a gearbox to reduce motor speed to turn a large diameter aeration rotor. These aerators have a long trouble-free life due to their low speed.

    By Mojan Engineering Co. based in Tehran, IRAN.

  • Model NSA Series - Low-Speed Aerators

    Surface mechanical aerators fall into two categories: high-speed aerators and low-speed aerators.

    By DBS Manufacturing, Inc. based in Atlanta, GEORGIA (US) (USA). from Other Products Product line

  • IDM - Model DET10 - Aeration Rotor / Surface Aerator

    The DET10 AERATION ROTOR / SURFACE AERATOR is an aeration unit, with a horizontal shaft, which turns parallel to the water surface. This unit is designed for the biological stages in waste water plants. Its purpose is to oxygenate the water and prevent possible sedimentation. This latter is achieved through the energy transferred.

    By Ingeniería De Medios del Pirineo S.L. (IDM) based in SABIÑÁNIGO (Huesca), SPAIN. from Aerators Product line

  • Horizontal Bladed Rotor

    A vital component of the CLR Process is the horizontal, bladed rotor aerator. The Lakeside Rotor provides oxygen to the biological mass, mixes microorganisms uniformly and adds mixing velocity to the channel to prevent solids from settling. Lakeside surface aerators have provided reliable aeration and mixing in more than 1,700 installations ...

    By Lakeside Equipment Corporation based in Bartlett, ILLINOIS (USA). from Water Aeration Product line

  • Tuke & Bell - Horizontal Aerators

    The Tuke & Bell Horizontal Aerator consists of a horizontal rotating shaft onto which either aeration tines or beater bars are fitted.  The shaft is mounted between bearings and can either be supported by the concrete tank or suspended from a steel bridge.  A flexible coupling transmits torque from the drive gearbox to the aerator ...

    By Tuke & Bell Ltd based in Wednesbury, UNITED KINGDOM. from Aeration Equipment Product line

  • AeroDuct - Aerators

    For old type oxidation ditches we supply own aerating brush rotors. They are usually coupled with automated weirs and oxygen control to provide cost-effective organic load removal.

    By Symbiona SA based in Warszawa, POLAND. from Aerobic Biological Treatment Product line

  • Wiser - Water Aeration System

    While conventional aeration methods are based on spraying water into the air or the running of water, the function of the Wiser aerator is based on the intensive mixing of air into water. The Wiser aerator contains a patented rotor and the aerator is designed to simultaneously sucks air (or any other gas, as required) and water into the rotor from ...

    By Wiser Oy Ltd. based in Kerava, FINLAND. from Water Treatment Product line

  • Passavant - Single or Double Mammoth Rotor

    Single or Double Mammoth Rotor for sewage aeration. Brush diameter: 0,7÷1 m. Length: 3 - 4,5 - 6 - 7,5 - 9 m. Oxygen transfer: 9 kg/h ml.

    By Passavant Impianti Spa based in Novate Milanese (MI), ITALY. from Water Treatment Product line

  • Model 150 - 450 HP - Folding Spike Rotors

    The spike rotor power harrow aerates, cultivates, levels, and easily handles difficult ground. A high-speed non-panning rotor with a unique spikes design, and special tailgates to keep material trapped until it is released as a fine seedbed. The gates can be adjusted to a large combination of angles, and even for wet conditions.

    By Farmgard Ltd based in Auckland, NEW ZEALAND. from Cultivation Product line

  • Evoqua - Model OX - Disc Aerators

    Reduce total lifecycle costs by more than 50%. We recommend replacing brush rotors with OX disc aerators, which reduce total lifecycle costs by more than 50 percent.  Because non-metallic OX disc aerators do not deteriorate or corrode like carbon steel brush rotors, the expected life of the system is at ...

    By Evoqua Water Technologies LLC based in Warrendale, PENNSYLVANIA (USA). from Aeration and Mixing Product line

  • Rotary Vane Air Blower

    The rotor is bias rotated (as the follow diagram) with the vane going in and out inside the slots. The vane are compelled to attach the inside surface of casing, so that air is absorbed from inlet and compressed out to the outlet.

    By Enfound Enterprise Co., Ltd. based in Taipei, TAIWAN. from Water Aeration Systems Product line

  • BLEC - Aeravator Vibrating Tine System

    The BLEC/First Products Aeravator is now available with an interchangeable rotor system for carrying out DE-COMPACTING AERATING and SLICING operations, and with the optional seeding system both overseeding and initial seeding works can be carried out in one pass. The special 3 point swing linkage hitch allows turning on the move for great ...

    By Blec UK based in Haslemere, UNITED KINGDOM.

  • JRCO - Model 753 - 38 Inch - Tow-Behind Hooker Aerator

    The JRCO Hooker Aerator, used for years as a front-mounted attachment for landscape aeration, is now available in a 60', five head tow-behind version. The soft-plug style of aeration is ideal for golf fairways, sports fields or anywhere true plug aeration is needed, without the messy compacted core clean-up of a hollow tine aerator. The JRCO ...

    By Jrco Inc. based in Rogers, MINNESOTA (USA). from Commercial Attachments Product line

  • JRCO - Model 755 - 60 - Tow Behind Hooker Aerator

    The JRCO Hooker Aerator, used for years as a front-mounted attachment for landscape aeration, is now available in a 60', five head tow-behind version.The soft-plug style of aeration is ideal for golf  fairways, sports fields or anywhere true plug aeration is needed, without the messy compacted core clean-up of a hollow tine aerator. The JRCO ...

    By Jrco Inc. based in Rogers, MINNESOTA (USA). from Golf and Turf Attachments Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you