aerosol dilution Equipment | Environmental XPRT

Model 3302A - Aerosol Diluter

Our Aerosol Diluter reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS™) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Sizers Product line

TSI - Model 3302A - Aerosol Diluter

Aerosol Diluter 3302A reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluters Product line

Palas - Model VKL 10 - Aerosol Dilution Systems

The welas VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for ...

By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

QVA - Model AD Aerosol Diluters

Magnehelic guage (4″ Diameter) for easy dilution factor recognition . Rugged polypropylene case. 316 Stainless steel diluter body. Bev-A-Line sample tubing for low tubing particle losses. Diluter compensates for varying flows. Designed for use with 1 CFM (28.3 L/min) particle ...

By QVA Test Solutions, LLC. based in New Bern, CALIFORNIA (USA). from Aerosol Diluters Product line

Dekati - Model DEED-300 - High Pressure Aerosol Diluter

The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

The KHG 10 series of heatable dilution system builds upon the VKL series ejector principle. In addition to the advantages of the VKL series, the KHG series dilution system is configured to be heatable to 150°C (optionally up to 200°C) and is additionally pressure-resistant up to 10 bar overpressure. ...

By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

Dekati - Model eDiluter™ - Portable Aerosol Dilution System

Dekati eDiluter™ is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter™ comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter™ ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

Dekati® - Model eDiluter™ Pro - Portable Aerosol Dilution System

Dekati eDiluter™ Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement application. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

QVA - Model ADS Aerosol Diluters

316 Stainless steel enclosure. 316 Stainless steel diluter body. Bev-A-Line sample tubing for low tubing particle losses. High sample inlet flow rate for tubing particle loss reduction. Single dilution value set to a constant standard flow rate. Acetal thermoplastic quick connect fittings. Polypropylene carrying ...

By QVA Test Solutions, LLC. based in New Bern, CALIFORNIA (USA). from Aerosol Diluters Product line

Dekati - Model DEED - Engine Exhaust Aerosol Diluter

The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle Remover). The DEED unit can be used together with any particle concentration or size distribution measurement device ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

Palas - Model VDD 10 - Aerosol Dilution Systems for Highly Concentrated Droplets

The VDD series dilution system is especially used for diluting highly concentrated liquid drops. With the VDD series, the input dilution air is controlled using a mass flow controller. This mass flow controller is integrated in an external control unit and is infinitely variable. By using a mass flow ...

By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

QVA - Model HHAD Aerosol Diluters for Handheld Particle Counters

316 Stainless steel diluter body. A specified dilution factor can be set from 10:1 to 1000:1. Designed for use with 0.1 CFM (2.83 L/min) flow controlled particle ...

By QVA Test Solutions, LLC. based in New Bern, CALIFORNIA (USA). from Aerosol Diluters Product line

Dekati - Model DAD - Aerosol Axial Diluter

The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

Venacontra - Model VC-DAS - Diluting Aerosol Sampler

Venacontra Diluting Aerosol Sampler (VC-DAS) is a combination of the Venacontra Porous Tube Diluter and the Venacontra Ejector Diluter providing a flexible and reliable sampling system which operates well with process gases with very high particle concentrations, such as combustion or nanoparticle synthesis. It ...

By Venacontra based in Kuopio, FINLAND.

Dekati - Model Diluter DI-1000 - Aerosol Sample Diluter / Gaseous Sample Diluter

The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robust, all stainless-steel design have made it a popular choice for dilution of combustion ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

Venacontra - Model VC-HDAS - High-temperature Diluting Aerosol Sampler

High temperature processes are very challenging for aerosol measurements due to their typically high concentrations of condensible vapours and high temperature ...

By Venacontra based in Kuopio, FINLAND.

TSI - Model 379020A - Rotating Disk Thermodiluters

Proper dilution and conditioning of exhaust emissions is essential to obtain accurate size distribution and particle number measurements. The Rotating Disk Thermodiluter 379020A is highly regarded in the field of particle emission measurement, especially for sampling, diluting and conditioning exhaust from ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluters Product line

Dekati - Aerosol Stainless-steel Cyclone

The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement instrument. Manufactured according to EPA standard 201A, with standard isokinetic nozzles available as ...

By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

Premium

PlasmaQuant - Model MS Q - ICP-MS for Efficient Routine Analysis

The fast system for high-throughput analysis and superior precision for large sample batches: High sensitivity for optimized data acquisition. Universal interference management mode 11 orders dynamic range for full coverage of required concentration ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Elemental Analysis - ICP-MS Product line

Premium

PlasmaQuant - Model MS Elite - ICP-MS for Demanding Material Analysis and Advanced Research

The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...

By Analytik Jena - an Endress+Hauser Company based in Jena, GERMANY. from Elemental Analysis - ICP-MS Product line