Only show results available in Texas? Ok

aerosol dilution system equipment

  • Palas - Model VKL 10 - Aerosol Dilution Systems

    The welas VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for powders and dusts. Dilution factors of up to ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Aerosol Dilution Systems Product line

  • Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

    The KHG 10 series of heatable dilution system builds upon the VKL series ejector principle. In addition to the advantages of the VKL series, the KHG series dilution system is configured to be heatable to 150°C (optionally up to 200°C) and is additionally pressure-resistant up to 10 bar overpressure. Isothermal and isobaric dilution can ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Heatable Aerosol Dilution System Product line

  • Palas - Model VDD 10 - Aerosol Dilution Systems for Highly Concentrated Droplets

    The VDD series dilution system is especially used for diluting highly concentrated liquid drops. With the VDD series, the input dilution air is controlled using a mass flow controller. This mass flow controller is integrated in an external control unit and is infinitely variable. By using a mass flow controller in combination with suction from a ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Aerosol Dilution Systems for Highly Concentrated Droplets Product line

  • Aerosol Dilution System - Model DIL 554 - Aerosol Diluter

    The dilution system DIL 554 is designed to accurately dilute aerosols to produce a defined particle concentration. It has a stainless-steel housing and is battery-operated. The main application is the verification of test aerosols for testing clean rooms. EN ISO 14644-3 defines the necessity of appropriate dilution systems when using test aerosols ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Diluter Product line

  • Aerosol Diluter - Model DDS 560 - Dynamic Dilution System

    The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and ...

    By Topas GmbH based in Dresden, GERMANY. from Dynamic Dilution System Product line

  • Testo - Model MD19-3E - Raw Gas Diluter

    MD19-3E (PND1) - The new MD19-3E is a re-engineered diluter. It keeps all advantages which a rotary diluter system brings with, the dilution ratio ranging from 1:15 up to 1:3000. Accurate dilution of aerosols usually requires precise and stable mass flow control, specially if large dilution ratios and ranges are requested. Our newly improved ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Raw Gas Diluter Product line

  • Markus Klotz - Model VS 100 - Particle Measuring Systems

    The dilution system VS 100 is for the defined dilution of aerosols and thus provides the possibility to conduct particle measurements even in the case of very high particle concentrations. This is done by splitting the sample volume flow into 2 partial flows whereby 99% of the actual sample volume flow is directed through a HEPA filter that ...

    By Markus Klotz GmbH based in Bad Liebenzell, GERMANY. from Particle Measuring Systems Product line

  • Dekati - Model FPS - Fine Particle Sampler

    Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Sampler Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you