aerosol model equipment

GASTAR is a dense gas dispersion model developed by CERC ideally suited to modelling accident and emergency response scenarios or investigating site safety involving releases of flammable and/or toxic materials from a variety of industrial accidents such as cryogenic spills, catastrophic tank failure, pipe fractures and multi-phase jets.

By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM. from Accidental Releases Product line

VSS-Umwelttechnik offers plastic droplet eliminators which remove entrained liquid particles from air flows.Our chevron type droplet separators (see illustration T120-2) show elimination rates of up to 99.9%.The elimination rate depends on the size and density of the droplets to be separated and on the viscosity of the carrier gas. An even better ...

By VSS-Umwelttechnik GmbH based in Troisdorf, GERMANY. from Components Product line

Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

Our Aerosol Diluter reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS™) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a tandem ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Sizers Product line

FirePro Fire Extinguishing Aerosol System. VolumeModel Coverage m³ Fire Classes Live expectancyFP20s 0.2m³ A,B,C & F 15 YearsFP40s 0.4m³ A,B,C & F 15 YearsFP80s 0.8m³ A,B,C & F 15 YearsFP100s 1m³ A,B,C & F 15 ...

By FirePro Cape Town based in Gordons bay, SOUTH AFRICA.

The Electrical Aerosol Detector (EAD) measures a key aerosol parameter believed to indicate the effective surface area of particles that can be deposited in the lung. This aerosol detector is a unique complement to our line of CPCs. Like a CPC, the EAD measures particle concentration as a function of time. But it also measures a parameter called ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

The Aerosol Electrometer provides accurate measurements of electrical current and flow rate. It measures total net charge on aerosol particles from 0.002 to 5 µm. When paired with a TSI Electrostatic Classifier, the Aerosol Electrometer measures the number concentration of monodisperse aerosol. This configuration is used primarily for calibrating ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

The custom designed, weatherproof DUSTTRAK™ Environmental Enclosure 8535 protects the DUSTTRAK II and DRX Aerosol Monitor Models 8530 and 8533.  This environmental enclosure allows you to make the same accurate and precise measurements outdoors or in harsh industrial environments.

By TTT Environmental Instruments and Supplies based in Anchorage, ALASKA (USA). from Air Monitoring - Aerosol & Dust Monitor Product line

The ATM 210 Liquid Aerosol Generator produces aerosols with known properties in accordance with guideline VDI 3491. This special model facilitates generation of aerosol into pressurised vessels (up to 10bar). Its design ensures a highly stable particle size distribution and concentration with high reproducibility and a high aerosol output. The ...

By Topas GmbH based in Dresden, GERMANY. from Aerosol Generation from Liquids Product line

This Mass Flowmeter is perfect for monitoring flows in your aerosol experimental setups. It measures mass flow rates up to 200 std. L/min, with exceptional accuracy at all flow rates. Plus, it measures flow volume, gas temperature, and absolute pressure. A low pressure-drop minimizes the impact of flow circuit back-pressure on your test ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

Model 4200 and Model 4240 AEROSOL CONCENTRATOR is a virtual impactor aerosol concentrator. Air is sampled at 300 L/min per minute into the concentrator. Particles >2.0 µm (Model 4220) or >1.0 µm (Model 4240) are classified by inertial separation and concentrated into a 1.0 L/min air stream for collection and analysis. Patented ...

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - 4200 Series Aerosol Concentrators Product line

The Process Aerosol Monitor (PAM) measures high-concentration, monodisperse aerosol, like that produced with our Model 3475 Condensation Monodisperse Aerosol Generator (CMAG) or other Sinclair-LaMer-type generators. The PAM is a process instrument that monitors aerosols on-line, measuring particle size and concentration in real time. It validates ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

The Model 1500 Aerosol Generator and Monitor (AGM) is a multi-function aerosol instrument comprised of an atomizer aerosol generator, a differential mobility analyzer (DMA) and a condensation particle counter (CPC) for aerosol generation and measurement.

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

The Universal Analyzer Model 1095E utilizes our proven multistage cooling technique to provide a minus 30°C dew point conditioned sample that is free of corrosive Acid Aerosol Mists. The Model 1095E was designed to protect your analyzer from Acid Aerosol Mists, have user friendly operation with a menu driven touchscreen, and to decrease ...

By Universal Analyzers Inc. - AMETEK, Inc based in Carson City, NEVADA (USA). from Gas Coolers Product line

This Mass Flowmeter is perfect for monitoring flows in your aerosol experimental setups. It measures mass flow rates up to 200 std. L/min, with exceptional accuracy at all flow rates. Plus, it measures flow volume, gas temperature, and absolute pressure. A low pressure-drop minimizes the impact of flow circuit back-pressure on your test ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Sizers Product line

The Model 1520 is an aerosol generator for producing monodisperse droplets and aerosol particles. The instrument uses the flow focusing effect to reduce the size of a liquid jet and the resulting size of droplets and reduce the aerosol particle size to 0.7 to 15 µm in diameter. The instrument is referred to as the Flow-Focusing Monodisperse ...

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

Model 100 and Model 110 MOUDI™ IMPACTORS are precision cascade impactors with sharp cut-size and low internal-loss characteristics. They are members of the MOUDI™ family of precision, high-accuracy impactors from MSP featuring: 30 L/min sampling flow rate, 37mm or 47mm collecting substrates. Micro-orifice nozzles to minimize pressure ...

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Cascade Impactors Product line

Model 100 and Model 110 MOUDI™ IMPACTORS are precision cascade impactors with sharp cut-size and low internal-loss characteristics. They are members of the MOUDI family of precision, high-accuracy impactors from MSP featuring: 30 L/min sampling flow rate, 37mm or 47mm collecting substrates. Micro-orifice nozzles to minimize pressure drop, ...

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Cascade Impactors Product line

The new Electrical Ionizer (Model 1090) shown on top of the new extended-range WPS (Model 1000XP) generates (+) and (-) ions by corona discharge for bi-polar aerosol charging and size analysis by electrical mobility. It eliminates the need for a source of ionizing radiation (Po-210 or Kr-85) traditionally used for the purpose. The new Model 1090 ...

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Particle Counters and Size Spectrometers Product line

Model 135 MiniMOUDI impactors are precision, high-accuracy impactors with a 2.0 L/min sampling flow rate and a small physical size. They are available with 6, 7, 8, and 10 impaction stages to provide size-fractionated particle samples as small as 56nm. The 6- and 8-stage versions of the Model 135 are for personal sampling and are referred to as ...

By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Cascade Impactors Product line