Aerosol Model Equipment Available In Swaziland
-
Manufactured by TSI Incorporatedbased in USA
number concentration in ambient air. It describes a standardized method not only for the Condensation Particle Counter (CPC), but also for its sampling and conditioning system. The Model 3772200 Sampling System for Atmospheric Aerosol is designed to match the requirements of CEN/TS ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
It is suitable for experiments in biopharmaceuticals, pharmaceuticals, cell biology and other fields, for the isolation and purification of microbial organisms, cellular proteins, mycobacteria and ...
-
Manufactured by TSI Incorporatedbased in USA
Neutralizer Model 3012 is a general-purpose radioactive neutralizer suitable for use with flows up to 50 L/min. If your flow rate will always be near the upper end of this range and/or if your aerosols are highly charged, consider the model ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol neutralization is an important component of aerosol science and engineering. Neutralizing aerosol particles can reduce electrostatic losses of particles within tubing or to other surfaces. Neutralization is also critical to gathering reliable particle size data when using a sizing instrument based on electrical mobility. The ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol neutralization is an important component of aerosol science and engineering. Neutralizing aerosol particles can reduce electrostatic losses of particles within tubing or to other surfaces. Neutralization is also critical to gathering reliable particle size data when using a sizing instrument based on electrical mobility. The ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol neutralization is an important component of aerosol science and engineering. Neutralizing aerosol particles can reduce electrostatic losses of particles within tubing or to other surfaces. Neutralization is also critical to gathering reliable particle size data when using a sizing instrument based on electrical mobility. The ...
-
Manufactured by TSI Incorporatedbased in USA
Neutralizer Model 3054A is a radioactive neutralizer suitable for use with highly-charged and/or highly concentrated aerosols in flows up to 150 L/min. If your flow rate will always be significantly lower than this, consider model 3012 and/or 3012A. If your particles will not be highly-charged and/or highly concentrated, consider ...
-
Manufactured by VSS-Umwelttechnik GmbHbased in GERMANY
%. The elimination rate depends on the size and density of the droplets to be separated and on the viscosity of the carrier gas. An even better separation may be achieved by additional aerosol separators (model T120-2/A, mesh type) which are, for example, required for chromic acid. A rinsing device for the purification of the chevron profiles ...
-
Manufactured by TSI Incorporatedbased in USA
The Electrical Aerosol Neutralizer Model 1090 offers an alternative to traditional radioactive neutralizers, frequently required for aerosol measurement applications. Due to increasingly stringent local, state and national regulations, obtaining a license to acquire and use radioactive sources is often difficult and in some cases ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol ...
-
Manufactured by TSI Incorporatedbased in USA
instruments. Data appears on the LCD display in real time. The Model 3063 includes an analog output for flow rate and an RS-232 port for operational control, data logging, and data display. An in-line HEPA filter is included to protect the flow sensor and maintain the flowmeter’s calibration from particles in the aerosol sample. Model 3063 is ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak Environmental Enclosure 8535 protects the DustTrak II and DRX Aerosol Monitor Models 8530, 8530EP, 8533 and 8533EP. This environmental enclosure allows you to make the same accurate and precise measurements in harsh environments. Built upon proven DustTrak technology that thousands of people use every day, the DustTrak ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol neutralization is an important component of aerosol science and engineering. Neutralizing aerosol particles can reduce electrostatic losses of particles within tubing or to other surfaces. Neutralization is also critical to gathering reliable particle size data when using a sizing instrument based on electrical ...
-
Manufactured by AirPhoton, LLC.based in USA
The Model SS4e Sampling Control Box is designed for use with the Model SS4i and SS5i Single Inlet System. It is used to both program the system and to store collect data. It offers 4 analog inputs for external devices and 1 digital port for communication with other AirPhoton devices, such as the 3-wavelength nephelometer. This allows ...
-
Manufactured by Nucon International, Inc.based in USA
The NUCON Model AGT™ is a high-output portable thermal aerosol (DOP or PAO) generator. It can provide up to 241 mL/min of submicron PAO, or 121 mL/min of submicron DOP, ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol neutralization is an important component of aerosol science and engineering. Neutralizing aerosol particles can reduce electrostatic losses of particles within tubing or to other surfaces. Neutralization is also critical to gathering reliable particle size data when using a sizing instrument based on electrical mobility. ...
-
Manufactured by Raymetrics S.A.based in GREECE
The LR111-D300 model aerosol LIDAR is an active laser remote sensing instrument, designed to provide a wealth of information about the atmosphere, including unambiguous detection of volcanic ash. It can also provide detailed information on the Planetary Boundary Layer (PBL), including information for air quality and forecasting model ...
-
Manufactured by Magee Scientific Companybased in USA
The Aethalometer is the instrument most-used in the world for the real-time measurement of aerosol Black Carbon. The Model AE33 is the culmination of almost 40 years of experience and development. It provides accurate data with aerosol speciation on time-scales as rapid as 1 second, using our patented DualSpot™ technology and ...
-
Manufactured by Nucon International, Inc.based in USA
The NUCON Model F is a truly portable detection instrument combining current solid-state photodiode technology with precision optical components. The result is a rugged, reliable, accurate, state-of-the-art particulate detection ...
-
Manufactured by Air Techniques International (ATI)based in UNITED KINGDOM
The 100X Automated Filter Tester is designed for test and quality control validation of filter media, replaceable particulate filters, and masks used in medical and industrial hygiene applications. The 100X meets leading global industry standards such as NIOSH 42 CFR Part 84, GB 2626, EN 13274-7:2019, and ASTM F3502-21. The 100X is a high capacity automated solution ideally suited to meet the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you