aerosol particle Equipment | Environmental XPRT

Premium

NanoAir - Model 10 - Aerosol Particle Counter

Sensitivity: 10 nm, Flowrate: 2.8 LPM (0.1 CFM). Purpose-built nanoparticle counter designed specifically for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).

Premium

IsoAir - Model 310P - Aerosol Remote Particle Sensors

The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Airborne Particle Counters - Cleanroom Particle Counters Product line

Spot Sampler - Aerosol Particle Collector

The Spot Sampler captures fine and ultrafine particles in a concentrated manner for easy, off-line analysis. Its moderated condensational technology enlarges particles without temperature extremes, making it ideal for volatile or biological ...

By Aerosol Dynamics Inc. based in Berkeley, CALIFORNIA (USA). from Instruments Product line

Kanomax - Model AES-1000 - Aerosol Particle Monitor

The Kanomax Aerosol Particle Monitor features an easy-to-read display, can connect to a network via ethernet, and offers simplified monitoring of particulates at multiple locations. The AES-1000 particle monitoring system provides near real time stable particle measurements at low cost. Measurement ...

By Kanomax USA, Inc. based in Andover, NEW JERSEY (USA). from Particle Counters - Particle Monitoring Station Product line

Kanomax - Model APM 3602 - Aerosol Particle Mass Analyzer

Particle size distribution measurement is normally used in order to measure nanosized particle distribution. While Differential Mobility Analyzers (DMA) classify particle by particle size utilizing electrostatic force, an APM classifies particles by mass based on entirely new classification ...

By Kanomax USA, Inc. based in Andover, NEW JERSEY (USA). from Aerosol Research Instruments Product line

Ioner - Model CC-8020 - Aerosol Corona Charger for Charging Aerosols and Particles

IONER´s Corona Charger CC-8020 has been designed to efficiently charge the particles in the low nanometric range. Its charging laws have been fully characterized, so sizing in the range 5-35nm can be performed. The CC-8020 can be used on both, positive and negative polarities. It has been ...

By Ioner based in Torrejón de Ardoz, SPAIN. from Products Product line

TSI - Large-Particle Aerosol Generator

Designed primarily for filter testing, the Large-Particle Aerosol Generator produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ...

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

Plastoquimica - Particle and Aerosol Separators

Aerosols are solid or liquid suspended particles with diameters in size of 10 to 20 microns (submicron range). PLASTOQUIMICA offers a new multistage ordered packing system for the separation of aerosols, being able to achieve a degree of separation down to 0.2 microns. One of its main advantages is that we ...

By Plastoquimica, S.L based in Sant Joan Despí, SPAIN. from Gas Treatment Systems for Industry - Dust Filtration/ Separation of Aerosols Product line

Livermore - Model SPAMS 3.0 - Single Particle Aerosol Mass Spectrometry

Using our unique aerosol interface, the SPAMS 3.0 instrument has been field demonstrated to analyze particles over a very wide range of sizes. In addition, our patented tracking system renders the SPAMS 3.0, to all practical purposes, immune from saturation with only the duty cycle of the laser governing the ...

By Livermore Instruments Inc. based in Oakland, CALIFORNIA (USA).

Aerodyne - Model SP-AMS - Soot Particle Aerosol Mass Spectrometer

The Soot Particle Aerosol Mass Spectrometer (SP-AMS) makes real-time, in situ measurements of black carbon containing particles. The SP-AMS instrument combines the technologies from two proven, commercial aerosol instruments: Aerodyne's Aerosol Mass Spectrometer (AMS) (Canagaratna et al, Mass. Spec. Rev., 26, ...

By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Aerosol Mass Spectrometers Product line

RBG system - Aerosol Generator for Solid Particles

Generation of test aerosols from powders, pollen and monolithic solids with mass flows from around 40 mg/h – 800 ...

By Palas GmbH based in Karlsruhe, GERMANY. from Aerosol Generators for Solid Particles Product line

QVA - Model HHAD - Aerosol Diluters for Handheld Particle Counters

316 Stainless steel diluter body. A specified dilution factor can be set from 10:1 to 1000:1. Designed for use with 0.1 CFM (2.83 L/min) flow controlled particle ...

By QVA Test Solutions, LLC. based in New Bern, NORTH CAROLINA (USA). from Aerosol Diluters Product line

Premium

Metrohm - Inline Sample Preparation (MISP) for Difficult Sample Matrices

Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...

By Metrohm AG based in Herisau, SWITZERLAND. from Ion Chromatography Product line

Premium

PMS - Model HPD II - High Pressure Diffuser

The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Airborne Particle Counters - Cleanroom Particle Counters Product line

Premium

FPI - Model LAMPAS-3.0 - Ambient PM TOF-MS FastTrack System

LAMPAS adopts the single-particle aerosol time-of-flight mass spectrometry that can measure single particles' chemical composition and size in real-time and respond rapidly to a sudden source of pollution. Due to its versatility, LAMPAS is generally used to determine pollution sources in the urban, remote, and ...

By Focused Photonics Inc. (FPI) based in Hangzhou, CHINA. from Analytical Instruments - Environmental Monitoring - Ambient Product line

Premium

Lasair III - Model 0.3 - 25 µm - Cleanroom Particle Counter

The Lasair III Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Airborne Particle Counters - Cleanroom Particle Counters Product line

Premium

F&J - Model FPXM2 - Glass Fiber Filter Paper Grade

High Volume glass micro fiber aerosol filters for capture of particulate matter. The medium efficiency filter media is composed of a blend of borosilicate glass micro fibers which are bonded by an acrylic resin ...

By F&J Specialty Products, Inc. based in Ocala, FLORIDA (USA). from Filter Paper - Glass Fiber Filter Paper Product line

Premium

Lasair - Model Pro - Airborne Particle Counter

for intuitive and reliable aerosol particle counting, this newest addition to the PMS fleet supports a variety of applications while meeting international cleanroom certification standards in the newly released EU GMP Annex 1. Sensitivity range: 0.3 - 25 ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Airborne Particle Counters - Cleanroom Particle Counters Product line

Premium

PMS - Model AM ll - 16/32 - Aerosol Manifold for Sequential Monitoring

Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM ll Aerosol Manifold from Particle Measuring Systems PMS offers advanced features for sequentially monitoring contamination at multiple cleanroom ...

By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA). from Airborne Particle Counters - Cleanroom Particle Counters Product line

Premium

F&J ECONOAIR - Model L-5PTR - Premium Personal Air Sampler

The F&J ECONOAIR Premium L-5PTR personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery pack. The L-5PTR can be programmed for ...

By F&J Specialty Products, Inc. based in Ocala, FLORIDA (USA). from Personal Air Samplers Product line