Aerosol Particle Equipment Available In Virginia
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Kanomax Aerosol Particle Monitor features an easy-to-read display, can connect to a network via ethernet, and offers simplified monitoring of particulates at multiple locations. The AES-1000 particle monitoring system provides near real time stable particle measurements at low cost. Measurement covers the equivalent range of ...
-
Manufactured by Aerosol Dynamics Inc.based in USA
The Spot Sampler captures fine and ultrafine particles in a concentrated manner for easy, off-line analysis. Its moderated condensational technology enlarges particles without temperature extremes, making it ideal for volatile or biological ...
-
Manufactured by Kanomax USA, Inc.based in USA
Particle size distribution measurement is normally used in order to measure nanosized particle distribution. While Differential Mobility Analyzers (DMA) classify particle by particle size utilizing electrostatic force, an APM classifies particles by mass based on entirely new classification ...
-
Manufactured by Ionerbased in SPAIN
IONER´s Corona Charger CC-8020 has been designed to efficiently charge the particles in the low nanometric range. Its charging laws have been fully characterized, so sizing in the range 5-35 nm can be performed. The CC-8020 can be used on both, positive and negative polarities. It has been designed to prevent filament ...
-
Manufactured by TSI Incorporatedbased in USA
Designed primarily for filter testing, the Large-Particle Aerosol Generator produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ...
-
Manufactured by Aerodyne Research, Inc.based in USA
The Soot Particle Aerosol Mass Spectrometer (SP-AMS) makes real-time, in situ measurements of black carbon containing particles. The SP-AMS instrument combines the technologies from two proven, commercial aerosol instruments: Aerodyne's Aerosol Mass Spectrometer (AMS) (Canagaratna et al, Mass. Spec. Rev., 26, ...
-
Manufactured by Livermore Instruments Inc.based in USA
Using our unique aerosol interface, the SPAMS 3.0 instrument has been field demonstrated to analyze particles over a very wide range of sizes. In addition, our patented tracking system renders the SPAMS 3.0, to all practical purposes, immune from saturation with only the duty cycle of the laser governing the number of particles that ...
-
Manufactured by Palas GmbHbased in GERMANY
Generation of test aerosols from powders, pollen and monolithic solids with mass flows from around 40 mg/h – 800 ...
-
Manufactured by QVA Test Solutions, LLC.based in USA
316 Stainless steel diluter body. A specified dilution factor can be set from 10:1 to 1000:1. Designed for use with 0.1 CFM (2.83 L/min) flow controlled particle ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while meeting global requirements for data integrity. Designed for intuitive and reliable aerosol ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J ECONOAIR Premium L-5PTR personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery pack. The L-5PTR can be programmed for ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
The nylon membrane is made of polyamide 66. It is hydrophilic in nature with good chemical compatibility. It can filter all water-based liquids and most organic solutions such as alcohols, hydrocarbons, ethers, esters, ketones, etc. The nylon membrane is widely used for sample collection, pre-filtration, sample testing and removal of ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept Smoke Systems have been producing smoke machines for almost 50 years and have manufactured specific aerosol generators for clean rooms for a majority of that time. We are the most experienced artificial smoke manufacturer in the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you