Only show results in Virginia? Ok

Air Dryer equipment

  • Premium

    Shand & Jurs - Model 94321 - Air Dryer

    The Shand & Jurs Model 94321 Air Dryer absorbs moisture from the air that is drawn into a storage tank during the unloading of product or by 'thermal breathing' conditions. Desiccant of high absorptive capacity is used as the drying agent. The hard ball shaped form of the desiccant minimizes the pressure drop, permitting more efficiency. This ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Tank Blanketing / Vapor Recovery Product line

  • Premium

    Tekran - Model 1102 - Air Dryer System

    The Tekran Model 1102 provides dry air to the Model 1130 Pump Module zero air generating system. The dryer unit contains two columns that alternate between absorbing water when cool and desorbing water during a heated regeneration step. Ambient air is pulled through the cool column by the 1130 Pump Module to remove moisture (typical dew point -40 ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Ambient Air Product line

  • Premium

    Peak Scientific - AD70L - Air Dryer

    The AD70L is a useful attachment for any laboratory's external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD70L requires little space ...

    By Peak Scientific Instruments Ltd based in Inchinnan, UNITED KINGDOM.

  • Premium

    Peak Scientific - AD140L - Air Dryer

    The AD140L is a useful attachment for any laboratory's external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD140L requires little space ...

    By Peak Scientific Instruments Ltd based in Inchinnan, UNITED KINGDOM.

  • IPP - Model 225682 - Air Dryer

    400 SCFM Zeks refrigerated air dryer, Model 400 HSFA, HeatSink compressed air dryer. Rated 400 scfm @ 38 degrees F with a 2.9 psi pressure drop. 2' diameter air inlet and outlet, 1/4' drain outlet. Uses refrigerant R404. 2.5 HP, 3/60/460 volt. Standard features include a fully hermetic refrigeration compressor, stainless steel heat exchanger, high ...

    By International Process Plants (IPP) based in Princeton Junction, NEW JERSEY (USA). from Dryer Product line

  • Model VMD-08 - Air Dryers

    The VMD-08 is a wall mountable Air dryer unit. It can supply up to 8 l/min of dry air under normal conditions. The VMD-08 is used to supply a dry air source for units that use less then 8 l/min such as the HTU-500, POG, VMUS-2, and VMUS-4.

    By AZCO Industries Limited based in Langley, BRITISH COLUMBIA (CANADA). from Air Dryers Product line

  • Model AD100 - Air Dryer

    The air dryer is designed to use a high powered fan to remove water from the product. With the web belt, the water goes trough the web and can be collected in a gutter or bin.

    By Allround Vegetable Processing B.V. based in Andijk, NETHERLANDS. from Air Dryer Product line

  • Model AD80 - Air Dryer

    The air dryer is designed to use a high powered fan to remove water from the product. With the web belt, the water goes trough the web and can be collected in a gutter or bin. Ventilator for drying must be mounted on a web belt.

    By Allround Vegetable Processing B.V. based in Andijk, NETHERLANDS. from Air Dryer Product line

  • Leman - Model AERO30L & Aero 30R - Air Dryer

    Characteristics: AIR Purity: < -60°C dew point. Capacity: 1.5 to 6 L/min. Outlet pressure: 6 bar maximum. Air source: external compressed dry Air. Presentation: bench casing or module. Communication: Full colour display with touchscreen (not for modules); USB, RS485 and Ethernet.

    By Leman Instruments SAS based in Archamps, FRANCE. from Zero-Air-Generators (AIR) Product line

  • Titan N2 - Model MDH - Air Dryer

    Our ultra-small desiccant compressed air dryers can be used for low-flow applications or with fractional horsepower air compressors. As a heatless regenerative desiccant air dryer, it's designed to produce low dew point and its small footprint allows for packaging inside equipment cabinets or at point-of-use. The MDH is perfect for a range of ...

    By Titan N2 Ltd based in Lennoxtown, UNITED KINGDOM. from Dry Air Product line

  • Model D-I - Air Dryers

    The D-I Air drier is a small affordable air drier that is designed to change colors when the desiccant media stops producing dry air. Its compact size and affordability makes it the perfect choice for small ozone applications with a low duty rating. Once exhausted, the media can be recharged in your oven or in the sunlight in dry locals.

    By Ozotech, Inc. based in Yreka, CALIFORNIA (USA). from Residential Product line

  • Kelvion - Air Dryer

    Air Dryer are available in different material designs: galvanized steel, stainless steel, copper, and smooth pipe. These product variations allow us to offer solutions that best fit to our customer's applications.

    By Kelvion Holding GmbH based in Bochum, GERMANY. from Finned Tube Heat Exchangers Product line

  • ESCO - Air Dryers

    The Air dryer prepares the incoming air for use in the ozone generator (or the oxygen generator) and that ensures a high ozone concentration and a reliable operation of the ozone unit. ESCO International supplies a complete range of air dryers specifically designed and selected to operate with our ozone generators.

    By ESCO International (EI) based in Glan Conwy, UNITED KINGDOM.

  • Model DH Series - Hot Air Dryers

    Foremost Machine Builders makes hot air dryers for drying hygroscopic and non-hygroscopic plastic resins. While our hot air dryers can handle hygroscopic materials with non-critical drying requirements, they are most frequently used for removing surface moisture from non-hygroscopic materials and as resin preheaters or processes that require ...

    By Foremost Machine Builders Inc. based in Fairfield, NEW JERSEY (USA). from Dryers Product line

  • Through-Air Dryers

    This automotive fiber batt through air dryer is used to heat up mats prior to molding. When the fiber tray is in the oven, a pneumatically activated door will close the oven. This assures proper internal airflow and avoids leakage to the room.

    By Pyradia based in St-Hubert, QUEBEC (CANADA). from Dryers Product line

  • Adams - Air Dryers

    Moisture in the compressed air of pneumatic systems causes the wear and corrosion of parts. This is turn results in the consumption of more compressed air and increase in energy usage. At some point the damage caused by compressed air moisture requires that components be replaced or repaired.

    By Adams Air & Hydraulics, Inc. based in Tampa, FLORIDA (USA). from Pneumatic Product line

  • Van Air - Model D-Series - Compressed Air Dryers

    Van Air Systems D-Series Compressed Air Dryers are single tower deliquescent compressed air dryers for stationary applications. D-Series Dryers remove harmful water vapor from compressed air lines. Wet compressed air enters the bottom of the dryer and flows upward through a bed of deliquescent desiccant, which absorbs moisture a

    By Van Air Systems based in Lake City, PENNSYLVANIA (USA). from Single Tower Deliquescent Dryers Product line

  • Model R Series - Refrigerated Air Dryers

    For compressors with after coolers, designed for inlet temperature up to 250°F/121°C. Rust-free copper and brass heat exchanger provide maximum heat transfer. Patented Triple-Tube Heat Exchangers provide lower, more consistent dew points with lower pressure drops (R75A/W and up). Standard Micromonitor R75A/W and up. Automatic drain system ...

    By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Air Dryers Product line

  • Model ADR Series - Refrigerated Air Dryers

    For compressors without after coolers, designed for inlet temperature up to 250°F/121°C. 10 - 20% increase in actual volume by reheating the out going air with the incoming warm air. Lower pressure drop - 2 PSIG/0.14 barg compared to 8 PSIG/0.55 barg in a typical after cooler, separator, and dryer installation. Air cooled models eliminate ...

    By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Air Dryers Product line

  • Van Air - Model 3-50 SCFM - Mini Heatless Compressed Air Dryers

    When treating small volumes of compressed air, an MHL series heatless regenerative desiccant compressed air dryer delivers dew points down to -100°F. Clean and dry compressed air keeps the most vital pneumatic equipment and processes operating smoothly and efficiently.

    By Van Air Systems based in Lake City, PENNSYLVANIA (USA). from Heatless Regenerative Dryers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you