Only show results available in Virginia? Ok

air duct manufacturer equipment

  • Class - Model II - Biological Safety Cabinets

    Safety Cabinet with a front aperture through which the operator can carry out manipulations inside the cabinet. It is constructed so that the worker is protected, the risk of product and cross contamination is low and the escape of airborne particulate contamination generated within the cabinet is controlled by means of an appropriate filtered ...

    By Bigneat Containment Technology based in Hampshire, UNITED KINGDOM. from Biological Safety Cabinets Product line

  • Model RVI Series - Centrifugal High Pressure Single Inlet Fans

    RVI fans are centrifugal, high pressure single inlet fans of size 315, 400, 500, 630 800, 1000 and 1250. The fans are powered by electric motors to directly or via a flexible coupling. To extend the fan power it is possible with a single size fan to use eight different impellers (1, 2, 3, 4, 5, 6, 7 and 8). Fans do not have power regulation ...

    By Kovodružstvo v.d. Strážov based in Janovice nad Úhlavou, CZECH REPUBLIC. from Centrifugal High Pressure Single Inlet Fans Product line

  • UIG - Fiberglass Storage Tanks

    United Industries Group, Inc. (UIG) manufactures a variety of fiberglass tanks using the highest quality corrosion-resistant  reinforced plastic (FRP Tank) materials. Products include process vessels, chemical storage tanks, foul air ducting, piping and more.

    By United Industries Group, Inc. based in Lake Forest, CALIFORNIA (USA).

  • eQ TOP - Compact Air Handling Unit

    The eQ Top is a compact air handling unit, manufactured in two sizes with an air flow range up to 1,3 m3/s. The eQ Top is a flexible air handling unit, which is easy to install and commission. The unit is supplied with direct-driven supply and extract air fans, supply and extract air filters and a rotary heat exchanger. There is a wide range of ...

    By Flakt Woods Group SA based in Geneva, SWITZERLAND. from Compact Air Handling Unit Product line

  • FLAKT-WOODS - Axial Fans

    Axial Fan - Front View Lightweight Construction and Low Levels of Vibration. Modern manufacturing techniques and materials result in a product, statically balanced, to minimise vibration levels.. Unique Aerodynamic Blade Section. Based on aerospace technology the impeller optimises air performance in a non-ducted installation.. High Efficiency ...

    By Farm Electronics Limited based in Lincolnshire, UNITED KINGDOM. from Axial Fans Product line

  • Portable Air - Model 20 Ton - Vertical Package Units

    The Vertical Space Saver allows installation of an air conditioning system where minimal floor space is available and where ceiling mounted or ducted units are not practical. The Space Saver can be used as a free blow unit with the optional discharge air plenum or it can be ducted. Other applications include manufacturing processes or temporary ...

    By Portable Air Temperature Control & Power based in Cocoa, FLORIDA (USA). from Vertical Package Units Product line

  • Airplus - Model Duct Type - Electric Heater

    Duct type electric heater's casing is manufactured from galvanized sheet metal. The resistors are made from 304 stainless steel tubes. With an adjustable thermostat (0 -80 °C) and 110 °C over temperature thermostat, it has two protection systems. Heaters can be manufactured according to customer requirements as 230V or 380V. The number of ...

    By Airplus Air-conditioning Technologies based in Istanbul, TURKEY. from Electric Heater Product line

  • Model V Series - Portable Cartridge Dust Collectors

    Eliminate dust, smoke and powders with the economical and compact V Series cartridge dust collector. With a choice of two compact, low-profile sizes - 750 CFM or 1,500 CFM - the V Series dust collector truly is the most economical solution for cleaner factory air. Available as a portable dust collector, a stationary system with direct ducting or a ...

    By CLARCOR Industrial Air based in Cincinnati, OHIO (USA). from Portable Cartridge Dust Collectors Product line

  • Rotobrush - Model R2500 - Negative Air Machine

    Many manufacturers consider their equipment to be portable; however to be considered truly portable and user friendly, it must be lightweight and mobile. The R2500 meets this criteria, yet provides the superior air flow and high vacuum necessary to effectively remove airborne dust and pollutants from the air ducts. Imagine the ease of moving this ...

    By Rotobrush International LLC based in Grapevine, TEXAS (USA). from Negative Air Machine Product line

  • Envirco - Model DCM RSR - Ducted Ceiling Module

    The Envirco DCM-RSR offers leak-free performance in a compact room-side-replaceable module. Designed to be installed in either 1 1/2” or 2” TBar ceiling systems or gypsum/plaster wall board systems, initial installations and filter maintenance are simplified. The DCM-RSR is designed for installation in critical air quality applications ...

    By Envirco based in Sanford, NORTH CAROLINA (USA). from Ducted Ceiling Module Product line

  • Hardcastle - Main Air Ducts

    Hardcastle Ventacrop are specialists in the manufacture and installation of Hardwood Main Air Ducts. Our frames are constructed using high quality, strong, robust “Keruing” hardwood. Your Main Air Duct will be designed to meet your requirements and will be installed by our experienced installation team to the highest of standards.

    By Hardcastle Ventacrop Ltd. based in East Yorkshire, UNITED KINGDOM.

  • Model 203 - Fiberglass Dampers

    Belco Manufacturing Co. Inc. has been manufacturing fiberglass dampers for the air-handling industry since 1980. At our facility in Belton, Texas we supply corrosion-resistant Fiberglass Reinforced Plastic (FRP) dampers that are used to regulate air flow or shut off and isolate a system. The operating conditions for the dampers are designed to ...

    By Belco Manufacturing Inc. based in Belton, TEXAS (USA).

  • Isokinetic Sample Probes

    Ultra offers a range of isokinetic sample probes, designed to extract a representative sample of particulate from a effluent duct or stack.   In addition to designing and manufacturing a full range of Isokinetic and Gaseous Sample Probes, we are able to offer advice at the design stage, as to the optimum location. One factor which ...

    By Ultra Electronics Nuclear Control Systems based in Wimborne, UNITED KINGDOM. from Isokinetic Sample Probes Product line

  • Air Damper

    Air damper manufacturing, manufacturing clapper, clapper plastic manufacturing, plastics manufacturing damper industrial ventilation lines, to regulate the air flow, increase the air speed - reducing, pressure regulation is designed to do. In particular, acid vapor, chemical (corrosive) will wear the mechanical valve mechanism for transporting the ...

    By Barat Industrial Plastic Engineering Co. based in Kartepe, TURKEY. from Air Damper Product line

  • Model DC Series - High Output UV Duct Cleaners

    Tested and proven performers DC In-Duct UV Air Purifiers consist of four or two high output ultraviolet lamps, ballast and accessory assembly, providing architects and engineers with a complete duct cleaner to meet all requirements. The DC UV systems are manufactured in different series for commercial and industrial installations. All DC UV air ...

    By American Air & Water, Inc. based in Hilton Head Island, SOUTH CAROLINA (USA). from High Output UV Duct Cleaners Product line

  • Sanuvox - Model Saber - High Intensity Quartz LV Purifier

    The Sanuvox Saber is our entry level Ultraviolet Air Purifier which employs a High Intensity Quartz UV Germicidal Lamp to destroy biological contaminants such as mold, bacteria and viruses. Like its namesake, the Sanuvox Saber is designed to kill. The Saber uses UVC Energy to slice through the air, destroying the biological contaminants which come ...

    By Sanuvox Technologies Inc. based in QUEBEC (CANADA). from High Intensity Quartz LV Purifier Product line

  • Model M36 Series - Ducted Air Filter Cleaners System

    Industrial Maid manufactures a series of ducted packaged air filtration units designed to keep industrial facilities clean and safe. The M36 series horizontal style units are perfect for hanging applications. These units are designed to be ducted to collect welding smoke and fumes, grinding dust, oil mist, vapors, odors or soldering fumes via a ...

    By Industrial Maid LLC based in Cortland, NEBRASKA (USA).

  • IndMaid - Model M36 Series - Ducted Packaged Industrial Dust Collector

    Industrial Maid manufactures a series of ducted packaged industrial dust collectors designed to keep facilities clean and safe. The M36 Series horizontal-style industrial air purifiers are perfect for hanging applications. These units are designed to be ducted to collect welding smoke and fumes, grinding dust, oil mist, vapors, odors or soldering ...

    By Industrial Maid LLC based in Cortland, NEBRASKA (USA).

  • Model SCD-020 - Square Ceiling Diffuser

    Standard Material: Aluminum profile. Usable for both supply and return air ducts. Direction of discharge can be selected to meet the requirements of room with 1 to 4 ways. Supply air can be oriented to vertically by blades of 1,2,3,4 of directions. Depending on architectural demands, can be manufactured in rectangular shape. Usable for places up ...

    By GMC AIR based in Plano, TEXAS (USA). from Square Ceiling Diffuser Product line

  • Portable Air - Model 10 Ton - Vertical Package Units

    The Vertical Space Saver allows installation of an air conditioning system where minimal floor space is available and where ceiling mounted or ducted units are not practical. The Space Saver can be used as a free blow unit with the optional discharge air plenum or it can be ducted. Other applications include manufacturing processes or temporary ...

    By Portable Air Temperature Control & Power based in Cocoa, FLORIDA (USA). from Vertical Package Units Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you