Air Intake System Equipment
-
Manufactured by Haritz Röhring GmbHbased in GERMANY
Why H+R Intake System? H+R delivers the complete solution from engineering, design, development, manufacturing and erection for modification, delivery and installation of air intake systems for compressors and industrial gas turbines. H+R can supply full range of complete filter systems for all ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
Air intakes are frequently exposed to large amounts of water from heavy rain, fog and mist. The air intake for air handling units should therefore be protected by using a water and moisture eliminator ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
The purpose of an air Intake system is to supply clean air to the gas turbine or compressor. Air needs to be properly cleaned and conditioned to ensure optimal operation of the main installation. Royal Dahlman is a supplier with a flexible approach; from the situational planning of the installation on site, to ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
Dynavane is designed to handle large volumes of air at high velocities while operating at a constant airflow resistance. The Dynavane incorporates inertial separation, providing high dust-removal efficiency of airborne particulate ...
-
Manufactured by Advanced Equipment Sales (AES)based in USA
Enhance the performance of your air conveyance system with an efficient, economical fresh air intake system from AES. Traditional air conveying systems rob manufacturing plants of conditioned air, increasing overall heating and cooling costs. This can create a ...
-
Manufactured by Muntersbased in USA
DCF is a series of advanced tailor made ready-to-install air intake systems for use in many application areas. They provide excellent protection against all types of droplets as well as particle filtration throughout a broad range of face ...
-
Manufactured by Muntersbased in USA
DFF is a series of ready to install, tailor made, three stage air intake systems for use in special application areas. The DFF series not only provides excellent protection against all types of droplets but also filters particles at high air velocities. DFF has been designed for the supply air in marine ...
-
Manufactured by Muntersbased in USA
DFH is a ready-to-install snow and droplet separator for use as an air intake in cold climates. The unit provides protection against all sorts of snow particles and rain, hence it prevents the intake from getting plugged with ice. DFH is typically used in cold climates, with snowfall, hail, drifting snow particles and high relative humidity. ...
-
Manufactured by FAIST Anlagenbau GmbHbased in GERMANY
Along with the successful implementation of compact air-intake systems for small and medium gas turbines, FAIST has become a specialist in air-intake systems for large gas turbine series (up to 270 MW). We provide you with standardized modular construction with future-oriented ...
-
Manufactured by Filter Concept Pvt. Ltd.based in INDIA
TURBINES, ENGINES, CENTRIFUGAL FANS, BLOWERS, & COMPRESSORS are common equipment for Industrial utility. They intake atmospheric air for its further operations. If moisture, dust, and varieties of solid particulate are present in the intake air, such contaminants can build up on the internal components such as valves, ...
-
Manufactured by Balcke-Durr GmbHbased in GERMANY
STF Balcke-Dürr Filter Systems are engineered and built to reliably protect the gas turbine against the pollution in the ambient air. A modular design of the Filter and Acoustic Solution supports today’s requirement for low engineering cost and quick project turnaround ...
-
Manufactured by Jiangsu Renhe Environmental Equipments Co., Ltd.based in CHINA
Filter House Material: Option A: Carbon Steel, Option B: Stainless Steel. Option C: Inner configuration: Stainless Steel; Outer material: Carbon Steel. Multiple Filter Stages: Three Stages: Prefilter + Pulse Filter Stage + Static Filter Stage. Single Filter Stage: a. Static Filter House. Pulse Filter ...
-
Manufactured by Shanghai Sinpar Scientific Instrumentbased in CHINA
Intake Air Humidity Unit for CFR test engines is equipped with an adjustable refrigeration system replacing the ice tower previously used for chilling and dehumidifying intake air to research and motor method octane test engines. This unit is connected through the humidifier tube to the carburetor for regulating ...
-
Manufactured by SPL Control Inc.based in CANADA
SPL Control noise absorption baffles are designed specifically for each project-specific acoustic performance, space and pressure drop constraints. Our in-house developed software is used by experienced acoustical engineers to develop an economical solution while also meeting the high standards required as part of the critical clean air ...
-
Manufactured by Hengst SEbased in GERMANY
Self-cleaning pulse filter plants are employed wherever there is high dust concentrations, like in desert areas and especially burdened industrial regions. The dust particles are separated on the surface of the filter medium. The dust cake that forms is effectively removed on-line by counter-current pulse-jet cleaning with compressed ...
-
Manufactured by Hengst SEbased in GERMANY
-sustained periods of high air humidity and mist, a droplet eliminator is additionally integrated. In zones with extremely high open wetness, such as in coastal regions, an additional upstream coalescer filter system is ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
The Filter holding frames will be used for the reliable, leak-free assembly of header frames (HF) filters. Typical Camfil Farr header frame (HF) filters are bag- ( e.g. Hi-Cap, H-Flo, S-Flo) and compact-filters (e.g. Opakfil, Citycarb, ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
FCBL-HF duct filter housing is dedicated for long header frame (HF) filters up to 650 mm in depth. Typical Camfil Farr header frame (HF) filters are bag filters (e.g. Hi-Cap, H-Flo, S-Flo, Cityflo) and compact filters (e.g. Opakfil, Citycarb, ...
-
Manufactured by Secco International Inc.based in CANADA
The ultimate solution for modern natural ventilation! Simply the most LIGHT, the most INSULATING and the most STRUCTURAL system that you can ...
-
Manufactured by Secco International Inc.based in CANADA
THE MULTI-WALL ISOCELL Z-wall™ OFFERS: The “Z” membrane inserted inside two films by the ISOCELL Z-wall™ technologie offers the possibility to manufacture this unique ventilation wall while having multiple insulating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you