Air Intake System Equipment In Europe
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
Dynavane is designed to handle large volumes of air at high velocities while operating at a constant airflow resistance. The Dynavane incorporates inertial separation, providing high dust-removal efficiency of airborne particulate ...
-
Manufactured by Haritz Röhring GmbHbased in GERMANY
Why H+R Intake System? H+R delivers the complete solution from engineering, design, development, manufacturing and erection for modification, delivery and installation of air intake systems for compressors and industrial gas turbines. H+R can supply full range of complete filter systems for all ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
Air intakes are frequently exposed to large amounts of water from heavy rain, fog and mist. The air intake for air handling units should therefore be protected by using a water and moisture eliminator ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
The purpose of an air Intake system is to supply clean air to the gas turbine or compressor. Air needs to be properly cleaned and conditioned to ensure optimal operation of the main installation. Royal Dahlman is a supplier with a flexible approach; from the situational planning of the installation on site, to ...
-
Manufactured by Muntersbased in USA
DCF is a series of advanced tailor made ready-to-install air intake systems for use in many application areas. They provide excellent protection against all types of droplets as well as particle filtration throughout a broad range of face ...
-
Manufactured by Muntersbased in USA
DFF is a series of ready to install, tailor made, three stage air intake systems for use in special application areas. The DFF series not only provides excellent protection against all types of droplets but also filters particles at high air velocities. DFF has been designed for the supply air in marine ...
-
Manufactured by FAIST Anlagenbau GmbHbased in GERMANY
Along with the successful implementation of compact air-intake systems for small and medium gas turbines, FAIST has become a specialist in air-intake systems for large gas turbine series (up to 270 MW). We provide you with standardized modular construction with future-oriented ...
-
Manufactured by Muntersbased in USA
DFH is a ready-to-install snow and droplet separator for use as an air intake in cold climates. The unit provides protection against all sorts of snow particles and rain, hence it prevents the intake from getting plugged with ice. DFH is typically used in cold climates, with snowfall, hail, drifting snow particles and high relative humidity. ...
-
Manufactured by Balcke-Durr GmbHbased in GERMANY
STF Balcke-Dürr Filter Systems are engineered and built to reliably protect the gas turbine against the pollution in the ambient air. A modular design of the Filter and Acoustic Solution supports today’s requirement for low engineering cost and quick project turnaround ...
-
Manufactured by Hengst SEbased in GERMANY
Self-cleaning pulse filter plants are employed wherever there is high dust concentrations, like in desert areas and especially burdened industrial regions. The dust particles are separated on the surface of the filter medium. The dust cake that forms is effectively removed on-line by counter-current pulse-jet cleaning with compressed ...
-
Manufactured by Hengst SEbased in GERMANY
-sustained periods of high air humidity and mist, a droplet eliminator is additionally integrated. In zones with extremely high open wetness, such as in coastal regions, an additional upstream coalescer filter system is ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
FCBL-HF duct filter housing is dedicated for long header frame (HF) filters up to 650 mm in depth. Typical Camfil Farr header frame (HF) filters are bag filters (e.g. Hi-Cap, H-Flo, S-Flo, Cityflo) and compact filters (e.g. Opakfil, Citycarb, ...
-
Manufactured by Camfil Ltdbased in UNITED KINGDOM
The Filter holding frames will be used for the reliable, leak-free assembly of header frames (HF) filters. Typical Camfil Farr header frame (HF) filters are bag- ( e.g. Hi-Cap, H-Flo, S-Flo) and compact-filters (e.g. Opakfil, Citycarb, ...
-
Manufactured by DuraTech Industries International, Inc.based in USA
In order to provide constant clean air to the engine and radiator the 4012F employs a Hydraulically Powered Self-Cleaning Air Intake System with 3,400 square inches (21,635.4 sq. cm) of air passages. The Self-Cleaning Air Intake System reduces maintenance, ...
-
Manufactured by DuraTech Industries International, Inc.based in USA
In order to provide constant clean air to the engine and radiator the 4012FL employs a Hydraulically Powered Self-Cleaning Air Intake System with 3,400 square inches (21,635.4 sq. cm) of air passages. The Self-Cleaning Air Intake System reduces maintenance, ...
-
Manufactured by EMW Filtertechnik GmbHbased in GERMANY
EMW Z–line pre-filter cells are used primarily in ventilation and air conditioning systems and air intake systems for turbomachinery. Their filter media are made up of 100 % synthetic materials and offer a very large filter surface due to their "Z" pleat configuration. Their extremely high dust holding ...
-
Manufactured by EMW Filtertechnik GmbHbased in GERMANY
EMW coarse dust filters are primarily used in turbomachinery air intake systems, ventilation and air conditioning systems, laboratories, chemical and pharmaceutical plants as well as in fume removal hoods at ...
-
Manufactured by Airprocontrol Industrial Air Conditioning Trade Inc.based in TURKEY
High efficiency cartridge filters used in the air intake systems of gas turbine engines in power plants. Airborne dust, dirt, and other particles can enter the gas turbine, causing contamination, wear, or damage to turbine blades and other internal components. GASTEX GT cartridge filters play a critical role in preventing damage. These ...
-
Manufactured by Nowentabased in SLOVAKIA
Air-filter pads and rolls are made from synthetic, glass, or natural fibres. They are used for special application areas in ventilation and climate-control, to include the following: controlled-condition cabinets; air-intake filter systems for fans, compressors, and motors; filter systems for motor combustion ...
-
Manufactured by Société d`Acoustique Industrielle (SAI)based in FRANCE
Main applications for compact jet-pulse air intake units are air intake systems for diesel & gas engines. These self-cleaning filters can also be used for other rotating machines such as large blowers or compressors. On very polluted sites like rock processing plants, mines or cement plants, compact jet-pulse ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you