Air Laboratory Equipment Near United Arab Emirates
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Our Corona 1010 has been engineered to meet the specifications of the Thermo Scientific Corona Veo Charged Aerosol Detector. This system can be purchased as a single nitrogen unit for laboratories with an external air supply or with a stackable air compressor for laboratories without an external air supply. The ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Designed and engineered as an on-site, compressorless nitrogen generation solution tailored for the Shimadzu LCMS-8045, 8050 or 8060, the Infinity 1051 delivers one output of nitrogen and another of dry air to laboratories who already have an existing air ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Many laboratory applications, such as air emission applications, require calibration gas. To meet these requirements, Peak Scientific have produced the CG15L which generates zero air by removing carbon dioxide and moisture from the air for applications requiring a higher performance than zero air ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The PG28L gas generators from Peak Scientific are suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc. The VM-3000 Mercury Vapor Monitor measures continuously the Hg concentration in air and other gases. It is used for laboratory applications as well as installed at places where mercury has to be monitored. It ...
-
PremiumManufactured by ENVEAbased in FRANCE
Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex). Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by ENVEAbased in FRANCE
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory. In contrast to a typical multi-element AAS the LabAnalyzer 254 is specially designed for elemental mercury. This allows top performance in analytical applications. The use of a specially developed highly ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated ...
-
based in UNITED KINGDOM
Tube conditioner- 230 ...
-
based in UNITED KINGDOM
Tube conditioner- 115 ...
-
Manufactured by AlyTechbased in FRANCE
The GMRack is the industrial version of the most popular laboratory gas mixer/diluter Aiolos II. Designed and manufactured by Alytech, this version of GasMix addresses to the applications outside of the laboratory . Compatible with the standard 19' rack mount, this system accommodates up to 6 gas channels to make calibration gas mixtures ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% ...
-
Manufactured by LaboGene A/Sbased in DENMARK
Jupiter Class 1 are a series of vertical flow clean air cabinets, which incorporate the latest laminator technology and energy-saving designs. The wide range of different models and options all provide optimal performance and protection for both the operator and ...
-
Manufactured by Continental Disc Corporation - Groth Corporationbased in USA
Continental Disc Corporation's Tite-Seal and Screw Type Assemblies are complete rupture disc and holder units specifically designed for use on various types of pressurized 'mini systems' such as air conditioning systems, refrigeration units, hydraulic accumulators, gas cylinders, portable compressed air systems, and laboratory ...
-
Manufactured by GD Waldner India Pvt. Ltd.based in INDIA
GD Waldner offers Secuflow fume cupboards, a new laboratory fume hood range that pushes the boundaries of energy efficiency and safety. With availability for rear wall installation, new design widths, and a larger internal workspace, every element of the Secuflow range of fume chambers has been designed considering lab users. These ...
-
Manufactured by TSI Incorporatedbased in USA
SUREFLOW™ room controls are designed to maintain room balance in Variable Air Volume laboratories by ensuring that the exhaust is greater than or less than the supply by a set volume. SUREFLOW controls also directly control heating and cooling in the space to maintain a comfortable temperature. TSI's controls are able to go the additional ...
-
Manufactured by MRC ltd.based in ISRAEL
Filter - HEPA Filter. Optimal space - ...
-
Manufactured by MRC ltd.based in ISRAEL
Filters - 1st layer: Pre-filter. 2nd layer: HEPA Filter. 3rd layer : Active Filter. Optimal space - ...
-
Manufactured by MRC ltd.based in ISRAEL
Sampling head impaction nozzle number: 300. High-capacity rechargeable lithium polymer battery: 6400 mA. Sampling flow rate: 100L / ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you