Air Monitoring Equipment Near Czech Republic
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
Fully controlled multiple arm system removes welding fumes effectively. We offer a wide range of extraction arms for at-source capture of welding fumes and grinding dust. Different arm lengths and diameters can be specific to certain processes and application. Plymovent extraction arms are available in working radiuses from 1.0 to 8.8 metres with diameters of 75 to 200 ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and ...
-
Manufactured by scan GmbHbased in AUSTRIA
Applications range from (ultra) pure water in the μg/l range up to industrial waste water in the g/l range. The nitrate concentration displayed is not sensitive to cross-influences from other substance groups such as organic carbon or total solids. The measured parameters are always nitrate and turbidity / solids ...
-
Manufactured by scan GmbHbased in AUSTRIA
The soli::lyser is an optical probe that measures concentrations of suspended solids directly in the water. It integrates the temperature measurement for on-line correction. Using the principle of infrared absorbance, the readings are not affected by colors. The soli::lyser™ utilizes an automatic cleaning system that uses compressed ...
-
Manufactured by Van Essen Instruments - part of Nova Metrix LLCbased in NETHERLANDS
The Diver-SDI integrates Divers with SDI-12 remote monitoring systems. A typical SDI-12 system illustrated in the figure below. On one end the Diver-SDI is connected to the SDI-12 system through the 3-wire SDI-12 bus, which also include the power supply of 12 Volt. On the other end a Diver cable (AS2xxx) is attached to connect the ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Application specific design, compact fast-response thermometer designed for temperature measurements on plate and float glass applications. A unique miniature radiation thermometer measuring just 28mm x 4mm, JRG/A is specifically designed to monitor temperature consistency in plate and float glass ...
-
Manufactured by scan GmbHbased in AUSTRIA
The multi::lyser is a combination of s::can carbo::lyser and nitro::lyser. That means that the s::can multi::lyser is characterised by measuring organic carbon & nitrate for a multitude of pre-defined applications. The multi::lyser is ideal for suface water, ground water, drinking water, waste water and offers an optimum of costeffectiveness and ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
to calibrate gas analyzers manually, remotely controlled or automatically. It is installed in air pollution monitoring stations for quality assurance in the laboratory and also in the production of gas ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA’s compact designed Zero Gas Generator ZNV-7 is used for mobile, stationary or laboratory scale zero point checking & diluting span gas sources for the calibration of ambient air ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
Our continuous cellular wheel weighers are designed for measuring and recording mealy, powdery, fibrous and structured products. The AMANDUS KAHL continuous cellular wheel weighers offer precise measurement of bulk materials with a wide range of surfaces. Our load cells continuously measure the weight of the filled cellular wheel and thus an instantaneous weight of the varying product flow. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to measure the ...
-
Manufactured by scan GmbHbased in AUSTRIA
The pH::lyser is a maintenance-free sensor for the real-time measurement of pH and temperature directly in the medium or in a flow-cell. Even under tough conditions (up to 90°C) or in waters with very low conductivity long term stability and precise measurement is ensured. The sensor is pre-calibrated ex works and immediately ready. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For level measurement in combination with flow measurents: Intelligent air-ultrasonic sensor for connection to flow transmitters such as NivuFlow 750, OCM Pro and PCM for non-contact level measurement in part filled flow measurement places. The compact air-ultrasonic sensor Type OCL has been developed for direct connection to ...
-
Manufactured by scan GmbHbased in AUSTRIA
The oxi::lyser is an optical multi-parameter probe that measures the concentration of dissolved oxygen and the temperature directly in the water. It does not need a minimum flow to produce accurate readings and integrates the temperature measurement for On-Line correction. Minimal conventional calibration and virtually zero ...
-
Manufactured by scan GmbHbased in AUSTRIA
The carbo::lyser is ideal for the measurement of the organic carbon load, represented by parameters like SAC, T(D)OC, COD, or BOD, and at the same time, turbidity / solids concentration. Applicability ranges from pure water to industrial waste waters. Pre-calibrations for different waters and applications significantly facilitate use. ...
-
Manufactured by PROTRONIX Ltd. (s.r.o.)based in CZECH REPUBLIC
ADS-VOC-24 is used to control ventilation, air cleaners and to monitoring of the air quality in the people occupied areas like restaurants, kitchens, facilities and likewise. ADS-VOC is space gaseous air pollutants sensor with analog voltage output 0 – 10V and output relays with adjustable levels of switching. The sensor ...
-
Manufactured by PROTRONIX Ltd. (s.r.o.)based in CZECH REPUBLIC
for use in areas polluted by cigarette smoke. Monitoring of the air pollution allows very economical controlling of ventilation systems. The sensor is also suitable for tentative detection of alcohol vapors, methane/propane-butane/natural gas ...
-
Manufactured by PROTRONIX Ltd. (s.r.o.)based in CZECH REPUBLIC
Room sensor NL-ECO-CO2 is used to monitor air quality inside buildings and effectively control ventilation systems according to current level of carbon ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you