air regulation equipment in Mexico

  • Model 1301F and 1301G - Regulator

    The CVS Type 1301F Regulator is designed for high pressure drop applications. It is a direct operated, high-pressure regulator that can accommodate inlet pressures up to 6000 psig (411 bar). Outlet pressures cover from 10 to 225 psig (0.7 to 16 bar) in three separate spring ranges. The CVS Type 1301G provides outlet pressures to 500 psig (34.5 ...

    By CVS Controls Ltd. Office in Naucalpan, MEXICO. from Regulator Product line

  • Premium

    Munters - MAC Air Cleaner

    Ammonia is a natural residual product from livestock production and because of environmental regulations many farmers are facing limits for ammonia emission – especially when they increase their animal production. In order to make it possible for farmers to enlarge their production in areas with ammonia restrictions, Munters has developed ...

    By Munters Office in Apodaca, MEXICO. from MAC Air Cleaner Product line

  • Tertiary Air Duct Slide Gate

    The nearly maintenance free tertiary air duct slide gate provides the regulation of the gas flow between tertiary air duct and the kiln. The tertiary air duct will be delivered complete ready for installation. The slide gate is manufactured out of refractory lining. (see left side). The slide gate consists of 2 parts. The lower part is a possible ...

    By A TEC Production & Services GmbH Office in Puebla, MEXICO.

  • VMaster - Viscous Air-Sensing Fan Drives

    The VMaster viscous air-sensing fan drive works smarter so your engine can work harder. Equipped with a bimetal precision sensor, the viscous air-sensing fan drive delivers the right amount of cooling required. A fan that operates at maximum speed only when cooling requirements demand it can cut fuel costs significantly over the life of the ...

    By Horton, Inc. Office in Naucalpan, MEXICO. from Viscous Air-Sensing Fan Drives Product line

  • IRTEC - Model G/B1 Series - Hose Reel

    Galvanized raingun trolley mounted on variable track wheels. - with 2 standard solid wheels + 3rd central air wheel with adjustable width (from G/A1 to G/D5). Safety panels in compliance with C.E.E. regulations. Sprinkler (slow reverse) with set of nozzles. Hot galvanized chassis and turn-table. Mechanical lifting and hold-down of sprinkler ...

    By Irtec S.p.A. Office in MEXICHEM, MEXICO. from Hose Reel Product line

  • IRTEC - Model G/ A1 Series - Hose Reel

    Galvanized raingun trolley mounted on variable track wheels. - with 2 standard solid wheels + 3rd central air wheel with adjustable width (from G/A1 to G/D5). Safety panels in compliance with C.E.E. regulations. Sprinkler (slow reverse) with set of nozzles. Hot galvanized chassis and turn-table. Mechanical lifting and hold-down of sprinkler ...

    By Irtec S.p.A. Office in MEXICHEM, MEXICO. from Hose Reel Product line

  • Premium

    Hilliard - Pneumatic Overload Release Clutch

    The Hilliard Pneumatic Overload Release Clutch provides adjustable, on-the-fly overload protection by using air pressure to regulate torque. Air pressure puts force on the balls placed inside the pockets in the clutch, and provides the means for torque transmission. By adjusting the air pressure, the overload torque can be increased or decreased ...

    By Hilliard Corporation Distributor in Monterrey, MEXICO. from Pneumatic Overload Release Clutch Product line

  • Premium

    HILCO - Static Oil Mist Eliminator

    HILCO Oil mist eliminators prevents oil mist from contaminating air or soil, help-ing facilities comply with environmental regulations. It also makes for a cleaner, safer work environment by eliminating oily residue build-up on engine room floors, enclosures and stairwells, while improving indoor/out-door air quality and reducing fire hazards.

    By Hilliard Corporation Distributor in Monterrey, MEXICO. from Static Oil Mist Eliminator Product line

  • Premium

    Shimadzu - Model CTO-20A20AC - Liquid Chromatographs

    Large-capacity, forced hot-air circulation units, the CTO-20A/20AC HPLC column ovens precisely regulate the temperature around the column. Automatic fan-speed control varies with the set temperature to provide stable analysis that is not influenced by the ambient temperature.

    By Shimadzu Scientific Instruments Inc Distributor in Santiago, MEXICO. from Liquid Chromatographs Product line

  • Premium

    ENVEA (ex Environnement S.A) - Model MMS - Micro Monitoring Station

    Turnkey AQMS Micro Monitoring Station, ISO and EN regulations compliant, MCERTs certified.. Continuous air quality measurement of CO, CO2, O3, NO, NOx and NO2 (SO2 optionally) in one single small footprint enclosure. USB and Ethernet TCP-IP for remote monitoring, data recovery and maintenance. Can be completed with PM162M fine dust sampler, with ...

    By ENVEA Distributor in Benito Juarez, MEXICO. from Micro Monitoring Station Product line

  • Model KSR - Digital Temperature Regulator for Air Heaters

    Temp. regulator for air heaters LE 40 000, LE 700, LE 5000 DF, LE 10 000 DF, LE 5000 HT, LE 10 000 HT and hot air blowers HOTWIND S and VULCAN E. With the right temp. probe, the air temp. of these devices can be measured, displayed, set and regulated. Leister temperature regulators allow the air temperature of air heaters and hot air blowers to be ...

    By Leister Technologies LLC Distributor in Hermosillo, MEXICO. from Digital Temperature Regulator for Air Heaters Product line

  • Model DSE - Three-Phase Controller

    Power electronics module to digitally regulate non-electronic air heaters. Leister temperature regulators allow the air temperature of air heaters and hot air blowers to be precisely regulated. These regulators are perfectly matched to our Leister devices and facilitate easy and fast installation. They include a digital display for target/actual ...

    By Leister Technologies LLC Distributor in Hermosillo, MEXICO. from Three-Phase Controller Product line

  • Oxidair - Thermal Oxidizer

    Remediation technology is constantly at risk of obsolescence because of new or broadened environmental regulations. This is particularly true in soil remediation and off-gas treatment where the processes involve soil, ground water, and air quality standards.

    By EPG Companies Inc. Distributor in Mexico City, MEXICO. from Thermal Oxidizer Product line

  • UNIPLAN - Model E 30 mm - digital, industrial fabric welder

    Leister’s UNIPLAN E is a small, lightweight machine that uses hot air for automatic welding of industrial fabrics. Its electronically regulated heating and digital airflow display will save you time and money, and improve your welding results.30 mm (1.2 in) seam

    By Leister Technologies LLC Distributor in Hermosillo, MEXICO. from digital, industrial fabric welder Product line

  • UNIPLAN - Model E 20 mm - Compact industrial fabric welder

    Leister’s UNIPLAN E is a small, lightweight machine that uses hot air for automatic welding of industrial fabrics. Its electronically regulated heating and digital airflow display will save you time and money, and improve your welding results.20 mm (.8 in) seam

    By Leister Technologies LLC Distributor in Hermosillo, MEXICO. from Compact industrial fabric welder Product line

  • Cyclone Dust Collector

    Cyclone dust collector (cyclone) is used for separation of solid fractions from air. Cyclone can be used separately or as a pre-separation before the filter units. Cyclone is not suitable for suction of sticky (wet) dust. Efficiency of cyclone separator depends on size and weight of exhausted particles and it might be regulated by valve in ...

    By Hennlich Engineering s.r.o. Distributor in Torreon, Coahuila, MEXICO. from Cyclone Dust Collector Product line

  • 600 LFG CH4/02 Land Fill Gas Analysis System

    Methane and Oxygen analyzer is housed in a climate controlled NEMA 4 or 4X enclosure approximately 48” H X 36” W X 16” D. The enclosure includes fittings for calibration gases, sample gas, and exhaust, solenoid valves for automatic calibration of each gas, inlet pressure regulator, flow meter with needle valve, particulate ...

  • WELDPLAST - Model S2 - PVC Extrusion Welder

    Leister’s new WELDPLAST S2 digitally regulated hand extruder’s display, shows both the weld zone and pre-heated hot air temperature and allows for each to be independently adjusted. This technology helps welders avoid fluctuations in improper temperature control that can lead to weak weld joints and/or overheating. WELDPLAST S2 users are impressed ...

    By Leister Technologies LLC Distributor in Hermosillo, MEXICO. from PVC Extrusion Welder Product line

  • Model TAH - TCH - Refrigeratio Dryers

    Dependable Performance Even at High Ambient Temperatures ; The quality of a refrigeration dryer is best judged by how effectively and reliably it can separate condensate, particularly at high ambient temperatures. With this in mind, the developers at KAESER Kompressoren created the TAH-TCH refrigeration dryer series. Featuring highly efficient ...

    By Kaeser Kompressoren GmbH Distributor in MEXICO. from Refrigeratio Dryers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you