air toxics monitoring Equipment | Environmental XPRT

Premium

Baseline - Model 9000 - Total Hydrocarbon Analyzer

The Baseline 9000 Hydrocarbon Analyzer is a microprocessor-based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The analyzer can be purchased in a variety of configurations with internal components for single or multi-point sampling (with or without a sample pump) for pre-filtered non-condensing ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Premium

Baseline VOC-TRAQ - Model II - Flow Cell for Total Organic Compound Measurements

or pump. The VOC-TRAQ II Flow Cell provides the ability to remotely monitor and record the presence of total volatile organic compounds using a PC with Windows-based OS software. The acute sensitivity of this device is provided by the piD-TECH eVx photoionization ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Premium

Baseline piD-TECH piD-POD - Flow-Through Sensor Enclosure

The piD-POD from MOCON allows for sample flow path integration of a Baseline piD-TECH eVx photoionization sensor into existing gas monitoring instrumentation without extensive engineering expense. Since a photoionization detector (PID) does not destroy the sample, the piD-POD is a direct way for OEMs to ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from OEM Photoionization Sensors Product line

Premium

Baseline VOC-TRAQ - Model II - Total Volatile Organic Compound Detector

Designed for ease of use, whether you are an air quality consultant, safety engineer, maintenance manager, or just concerned about total volatile organic compound (TVOCs) in your environment. Our Baseline VOC-TRAQ II detector is an excellent way to monitor and record PID detectable TVOC's. Based on the latest ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Premium

Baseline - Model 9200 - Dual Detector Gas Chromatograph

The Baseline® 9200 gas analyzer combines the selective detection of a gas chromatograph (GC) with another simultaneous GC application or with the continuous monitoring abilities of a total hydrocarbon analyzer (THA) in a single, compact, sensitive and stable instrument. Building on decades of ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Premium

Baseline - Model 9000 MNME - Methane/Non-Methane Analyzer

The Baseline 9000 MNME uses a flame ionization detector (FID) in conjunction with an oxidation catalyst switched in and out of the sample stream. The catalyst oxidizes all hydrocarbons except methane to produce a methane only measurement. This catalytic reaction relies on the presence of oxygen (O2) in the sample. The methane value is then subtracted from the total hydrocarbon concentration to ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Premium

Baseline piD-TECH eVx - Photoionization Sensors

As one of the most widely used gas detection techniques, the Photoionization Detector (PID), is commonly applied in both portable and fixed instruments for detection of a wide variety of organic compounds and some inorganic gases in ambient air. MOCON’s patented, award-winning piD-TECH eVx plug-in ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Premium

Baseline - Model 9100 - On-Line Gas Chromatograph

The Baseline 9100 on-line gas chromatograph blends state-of-the-art technology with the reliability and flexibility of gas chromatography. Building on decades of experience, this instrument has been designed with key features to meet your application requirements. The GC is specifically designed for sub-part-per billion (sub-ppb) to percent level detection, dependent upon the application, to ...

By AMETEK MOCON based in Brooklyn Park, MINNESOTA (USA). from Industrial Analyzers & Sensors Product line

Air Check Ex - Toxic Gas Monitor

The Air check Ex Toxic Gas Monitor is a compact gas monitoring system that’s ideal for continuously monitoring toxic and in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only tool ...

By PureAire Monitoring Systems, Inc based in Lake Zurich, ILLINOIS (USA). from Carbon Monoxide Monitors Product line

Model 48898 - EPA Toxic Organic Mix 2A

EPA Toxic Organic Mix 2A 2 mg/mL each component in methanol, ampule of 1 ...

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA). from General Use Air Monitoring Standards Product line

Model 48896 - PA TO-1 Toxic Organic Mix 1A

EPA TO-1 Toxic Organic Mix 1A 2 mg/mL each component in methanol, ampule of 1 ...

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA). from General Use Air Monitoring Standards Product line

Model 48897 - EPA TO-1 Toxic Organic Mix 1B

EPA TO-1 Toxic Organic Mix 1B 2 mg/mL each component in methanol, ampule of 1 ...

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA). from General Use Air Monitoring Standards Product line

Aclima - Air Measurement and Analysis Platform

Backed by rigorous science, Aclima has pioneered a new way to map and analyze air pollution and greenhouse gases. Powered by our network of roving and stationary sensors, Aclima provides the broadest set of pollutant measurements on the market, at unprecedented scale with block by block ...

By Aclima, Inc. based in San Francisco, CALIFORNIA (USA).

Model SSS-903 - Toxic Gas Detector

ESP Safety’s SSS-903 Toxic Gas Detector is designed to safely detect and monitor a variety of toxic gases in the air, including hydrogen sulfide, carbon monoxide, chlorine, nitric oxide, and sulfur dioxide, over a range of 0-100 ppm. By connecting the sensor to the transmitter, the SSS-903 is ...

By ESP Safety, Inc. based in Houston, TEXAS (USA). from Gas Detectors Product line

Markes - Model C-BTX100-10 - Certified Reference Standard (CRS) Tube (BTX)

Certified reference standard (CRS) tubes are packed sorbent tubes loaded with certified levels of relevant analytes. Prepared by an expert national standard laboratory to ensure high accuracy in loading levels, they are a convenient tool for in-house quality assurance and auditing of the complete TD–GC(–MS) analytical process, including calibration protocols. 100 ng certified loading ...

By Markes International Ltd - a company of the Schauenburg International Group based in Bridgend, UNITED KINGDOM. from Certified Reference Standard Tubes Product line

Manufactured Gas Plant

Perimeter air monitoring is required to measure chemicals during the clean-up of former manufactured gas plant (MGP) sites released during soil of excavation and removal. The chemicals of concern are primarily BTEX and Polycyclic Aromatic Hydrocarbons (PAHs) as well as Particulate Matter (PM). During the ...

By Eurofins Air Toxics Inc based in Folsom, CALIFORNIA (USA).

WITT - Model RLA 100 - Ambient Air Monitoring System

Ambient air monitoring for the detection of CO2; 2 alarm limits (user-determined), with digital display and LEDs, easy wall mounting, optional: alarm light and horn. ...

By WITT-Gasetechnik GmbH & Co KG based in Witten, GERMANY. from Gas Analysers Product line

Matheson - Portable Gas Cylinders

MATHESON Portables is a sweeping product line including pure gases, calibration standards, multicomponent mixtures, and two component mixtures. Packaging for standards and mixtures includes lightweight aluminum cylinders and portable steel cylinders. Many are intended for one-time use, and are disposable. A complete array of pure gases is offered in classic lecture bottles. Complete portable ...

By Matheson Tri-Gas, Inc. based in Montgomeryville, PENNSYLVANIA (USA). from Gases Product line

BREATHE - Underground Parking Gas Monitor

Designed to provide continuous surveillance of toxic gases in underground parking ...

By EMCO Technologies based in Deal, UNITED KINGDOM. from Gas Detection Systems Product line

Auroras - Wireless Gas Sensors

Auroras’ wireless gas sensors are designed for the continuous monitoring of toxic and combustible gases in the air. No complicated configuration is needed. Our wireless sensors are plug and play. The coordinator will collect all the data from the wireless sensor. Data logging is available. You can also ...

By Auroras s.r.l. based in Codogno (LO), ITALY. from Sensors Product line