Alarming Instrument Equipment In Latin America
-
Manufactured by Acoem Australasiabased in AUSTRALIA
to instruments that provide their readings using a 0 to 5V output such as wind direction or temperature sensors. The digital outputs can be used to control various dilution calibrators or indicate alarm conditions and the digital inputs are used to record alarms from instruments, calibrators and out of service status ...
-
Manufactured by Bacharach, Inc.based in USA
buzzer and LED alarm indicators. The unit can be configured from single-sensor, one-alarm level system to larger scale systems consisting of 6 sensors with 2 alarm levels. The instruments are connected to and powered by the MGD controller. A variety of housing options are available including IP41 and IP66 rated enclosures, which ...
-
Manufactured by S.E. International Inc.based in USA
memory and the free Observer USB Software allow you to download your data, set computer alarms, and calibrate your instrument. ...
-
Manufactured by Industrial Scientificbased in USA
, man-down, or panic situation causes an instrument to alarm, all peers in the connected group will instantly know who’s in danger and what hazards they face. When seconds matter, you can rely on help from team members nearby, rather a control room or call center hundreds of miles ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Electronic transmitter / controller for the measurement of the specific resistivity or specific conductivity in high purity ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Designed for pharmaceutical applications with 2 signal outputs and 2 contact relays. The USP alert can be selected as a percentage ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Electronic transmitter & controller for the measurement of the dissolved oxygen in potable water and effluents. Connections for a three-electrode oxygen sensor with integrated temperature probe, e.g. Swansensor Oxysafe1000 and for a SWAN digital sample flow meter. Temperature and air pressure ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Electronic transmitter / controller for the measurement of dissolved oxygen in high purity water. Sensor connections for Oxytrace G oxygen sensor with integrated NT5k temperature probe and for a digital sample flow meter. Automatic compensation of temperature and air ...
-
Manufactured by In-Situ Environmentalbased in USA
The TROLL Link 201 Telemetry System transmits real-time data via the Iridium Satellite network. The Iridium Satellite network is optimal for extremely remote sites with no cellular ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Electronic transmitter/controller for the continuous measurement of the pH value or Redox (ORP), sample temperature and flow in ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
Electronic transmitter & controller for the measurement of conductivity in power cycles. For the measurement before (specific / total conductivity) or after a cation exchanger (acid / cationic conductivity). Conductivity measuring range from 0.055µS/cm to 30mS/cm. Connections for a two-electrode conductivity sensor with integrated Pt1000 temperature sensor, e.g. Swansensor UP-Con1000 ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
High precision, non-contact nephelometer based on ISO 7027 (EN 27027, DIN 38404) for the continuous measurement of turbidity in pure water, potable water, surface water treatment and ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-2008 EV FC MCU is equipped with a Flow Sensor. The Flow Sensor is positioned in the Drain line of the Measuring Cell. If the flow rate through the Measuring Cell is too low, or if the sample is not flowing at all, the Instrument will go to Alarm condition and issue a “Status: Flow?” message. According to MEPC.107(49) the ...
-
Manufactured by Industrial Scientificbased in USA
Calibration gas is an important component in ensuring the proper performance of your gas monitors. Calibration gas ensures that your gas detector is functioning properly and responding to gas exposures as expected. Gas detection equipment should be bump tested daily and periodically calibrated to ensure the sensors in your gas detector are functioning ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The HiVol 3000 PUF Sampler provides a flexible platform for sampling organic compounds and monitoring basic meteorological parameters. The PUF utilises poly-urethane foam (PUF) to trap organic vapours in addition to collecting particulate matter and store it in a sterile environment for later ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The MegaVol 3000 particulate sampler performs remote unattended sampling of particulates and is ideal for heavy metal and radiation exposure ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The HiVol 3000 particulate sampler performs remote unattended sampling of PM2.5, PM10 or TSP along with basic meteorological parameters. The HiVol 3000 incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly representative sample of particulate matter. Optional attachments allow the sampler to measure wind speed and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you