Only show results in Virginia? Ok

alternative fuel production equipment

  • Premium

    ANDRITZ Vandenbroek - Model VDB - Rotary Drum Dryer

    The rotary drum dryer is suitable for drying woody biomass, agricultural products, and municipal solid waste (MSW). For the production of alternative fuels as well as in the area of waste-to-energy, ANDRITZ Vandenbroek rotary drum dryers are applied to decrease the moisture of the material to the desired level fo downstream process steps.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Rotary Drum Dryer Product line

  • Premium

    KAHL - Domestic Waste Pelleting Plants

    Compact Energy: Waste belongs to the category of the most difficult materials to be processed. With KAHL plants municipal and industrial waste can be transformed into valuable alternative fuels.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Domestic Waste Pelleting Plants Product line

  • Premium

    Model MBT-AD - Mechanical Biological Treatment with Anaerobic Digestion

    Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic fermentation is a superior alternative to composting. Biogas – a mixture of methane and carbon dioxide – is created during anaerobic digestion ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Mechanical Biological Treatment with Anaerobic Digestion Product line

  • Premium

    HARDEN - Model TL1316 - High Efficient of Municipal Solid Waste Shredder/MSW shredder

    Municipal Solid Waste due to the rising energy costs, landfill directives and importance of alternative energy sources it will be necessary to exploit the energy content of the waste to substitute fuel, RDF - residual derived fuel. The production of RDF is the optimum solution both environmentally and economically. The Harden Recycling System is ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    HARDEN - Model QS1010 - High eficient of four Shaft Shredder

    Four shaft shredder is an industrial shredder with four-shaft cutting system, which is especially suited for applications such as e-scrap, rubber tire recycling, alternative fuel production, and size reduction of contaminated materials where uniform, small to medium particle size is desired.Four Shaft Shredder ApplicationsShredding applications ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • RUNI - De-watering reject from industrial production

    From waste to fuel by increasing dry matter content. Save disposal-site costs – either by delivering a drier product or by finding alternative solutions. Reduce waste amounts and transport costs by removing water from reject material. Before waste paper can be converted into recycled paper, all undesirable material must be separated out. ...

    By Runi A/S based in Tarm, DENMARK. from De-watering reject from industrial production Product line

  • Model VSS 15 - VSS Oscillation Screens

    VSS oscillation screens are generally the perfect solution for screening sawmill waste such as wood chips, sawdust, wood shavings (animal bedding), bark, alternative fuel (RDF), etc. and particle sizes up to approx. 100 mm (occasional overlengths up to 500 mm) into several fractions and for separating fines and overlengths from wood shavings (for ...

    By Vecoplan AG based in Bad Marienberg, GERMANY. from VSS Oscillation Screens Product line

  • Cadence - Mixing Energy Injector

    Innovative Technology for Enhanced Secondary Fuel Use in Pre Calciner Cement Kilns. Significantly Reduce Co Without Changing Alternative Fuel Rates. Increased Alternative Fuel Rates. Significant Emission Reduction. Improved Thermal Efficiency. Better Product Quality. Using the new Cadence Mixing Energy Injector, CO can be lowered up to 35% while ...

    By Cadence Environmental Energy Inc. based in Michigan City, INDIANA (USA).

  • Magnum - Model 6.4L V2S HP - Turbocharger

    Magnum Quality Replacement Parts were born out of a need for a high quality alternative to overpriced parts from the OEM dealers. Our 40+ years of experience in fuel injection and turbochargers affords us the opportunity to bring to market exceptional parts at exceptional prices. You can rest assured that when you purchase one of our high quality ...

    By Area Diesel Service, Inc. based in Carlinville, ILLINOIS (USA). from Turbocharger Product line

  • Fuel and Oil Rotary Hand Pump

    Piusi has utilized their experience in developing a rotary hand pump for DEF to successfully design one for use with Fuel and Oil. The new Fuel and Oil Rotary Hand Pump is self-priming, and constructed with stainless steel and technopolymer to guarantee a long service life. This manual alternative for fuel transfer can transfer diesel or oil at 10 ...

    By Piusi USA, Inc. based in Fort Lauderdale, FLORIDA (USA). from Fuel and Oil Rotary Hand Pump Product line

  • Solid Recovered Fuel (SRF)

    O.Kay Engineering understand the importance of product quality within the SRF Market. We will design your facility based on your incoming waste and the specification of the end user. We will work with you to design a facility to decrease chlorine and moisture content of the processed material and enhance the calorific value. Your fuel will be ...

    By O.Kay Engineering Services Ltd based in Desborough, UNITED KINGDOM. from Solid Recovered Fuel (SRF) Product line

  • SuperVault - Model MH - Above Ground Storage

    The SuperVault MH above ground storage solution gives new options for all considering storage of hazardous products. Historically petrol and petrol like product storage would be considered ‘always’ below ground. The SuperVault MH above ground storage solution offers a tried and tested alternative.

    By Ledbury Welding & Engineering Ltd based in Ledbury, UNITED KINGDOM. from Above Ground Storage Product line

  • Drum Dryers

    Dutch Dryers has been developing and building drum dryers since it was founded in 2007. Thermal drying systems, whereby the material to be dried is fed through a rotating drum. Hot air (with a maximum inlet temperature of 800 to 1000°C) dries the material. This air can be generated using a gas-fired oven or one that is heating using an ...

    By Dutch Dryers B.V. based in HW Zeist, NETHERLANDS.

  • Rocket Mill RM 2.50 Double

    The Rocket Mill is A TEC’s innovation for alternative fuel preparation which combines drying and grinding in one step. The machine is equipped with two grinding chambers which can be independently loaded. Permanent control of the mill power guarantees optimum and secure utilization. The input material usually only requires one pre-shredding ...

    By A TEC Production & Services GmbH based in Gödersdorf, AUSTRIA.

  • Industrial Air Heaters

    Air Heaters are the best solution/alternate for all application wherever air heating is done. There are tremendous savings of over 70% as compared to Electric Heating and over 40% as compared to Thermic Fluid/Steam Heating. All major OEMs buy Alfa-Therm Air Heaters for their machineries and recommend our product exclusively. Only internationally ...

    By Alfa-Therm Limited based in New Delhi, INDIA. from Industrial Air Heaters Product line

  • Bianna - Model MW 100 - Windsifter

    The Windsifter is a rugged equipment with great capacity to separate the light material from the heavy one. The aim of which is the separation of the inert material (stones, scrap, stainless steel) so availability and durability of the secondary shredders of alternative fuels production lines can be increased, thereby assuring a low operating ...

    By Bianna Recycling based in Celrà (Girona), SPAIN. from Windsifter Product line

  • N-Viro - Fuel

    N-Viro Fuel is a patented biomass-derived fuel that has the physical and chemical characteristics of coal. It is generated from municipal biosolds and other organics such as livestock manure, food waste, and pulp and paper sludge by-products. The resulting product is blended with coal and used as a energy substitute by electric utilities. The ...

    By N-Viro International Corporation based in Toledo, OHIO (USA).

  • Model EGCS-HM - Scrubber for Exhaust Gas Cleaning

    The overwhelming majority of ships around the world operate using engines and boilers powered by heavy fuel oil. The resulting combustion exhaust gases that are emitted contain soot and sulfur oxides that pollute the environment. The gradual reduction of limit values is now creating a need for action amongst shipping and charter companies. As a ...

    By SAACKE GmbH based in Bremen, GERMANY. from Scrubber for Exhaust Gas Cleaning Product line

  • Magnum - Model 7.3L TP38 - Turbocharger

    Magnum Quality Replacement Parts were born out of a need for a high quality alternative to overpriced parts from the OEM dealers. Our 40+ years of experience in fuel injection and turbochargers affords us the opportunity to bring to market exceptional parts at exceptional prices. You can rest assured that when you purchase one of our high quality ...

    By Area Diesel Service, Inc. based in Carlinville, ILLINOIS (USA). from Turbocharger Product line

  • Waste Materials with Energy Potential

    The fraction of waste that Isn’t recyclable  In a simple manner or which Isn’t or genie, is graded as medium to high by virtue off la NCV (net calorific value), which means the manufacturing of a Solid  Recovered Fuel (SRF). TNs fraction, mostly composed of complex plastic and household textiles, must be prepared In order to ...

    By 3 WAYSTE - Groupe Vacher based in POLIGNAC, FRANCE. from Waste Materials with Energy Potential Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you