Only show results available in Massachusetts? Ok

aluminium recovery equipment

  • Premium

    Regulator Cetrisa - Model R-SLB - Cans & Briks Sorting System

    The Cans & Briks1 SORTER (R-SLB) is classifying equipment that processes the flow of material made up of cans and briks1 that are previously separated from the general flow of the Municipal Solid Waste by means of an Eddy Current Separator. The cans undergo the most influence and are thrown ahead, where they are distinctly separated from the ...

    By Regulator-Cetrisa based in Gava, SPAIN. from Non-Ferrous Metal Separators Product line

  • Premium

    Redoma - Model SM Series - Screening Machine for Cable Recycling Plants - Up to 1300 kg/h

    The screening machine is used for recovery of small copper and aluminium particles - so called fines - from the insulation of granulated and separated cable. It is always installed as an additional unit, including transport equipment, after a REDOMA ...

    By Redoma Recycling AB based in Malmö, SWEDEN. from Single Machines Product line

  • MiniVac System

    The MiniVac system is a lightweight, aluminium, hand portable vacuum recovery system for the collection of spilt oils and floating contaminates. The MiniVac employs safe diesel driven units with a unique ability to split into 2 parts for ease of handling. The modular system is available in three standard ...

    By Vikoma International Limited based in East Cowes, UNITED KINGDOM. from Recovery Systems - Vacuum Product line

  • Schulz - Aluminium Bright Plating Bath

    The recovery of the aluminium bright plating bath by means of a forced circulation evaporator system at ALBEA in Offenburg is also based on the evaporation/crystallisation ...

    By Schulz+Partner GmbH based in Teningen, GERMANY. from Systems- Acid Regeneration Product line

  • Eco-Tec AnoPur - Purifies Anodizing Baths to Improve Aluminum Quality

    AnoPur is a version of Eco-Tec’s Acid Purification System specifically adapted for purification of sulfuric acid used in aluminum anodizing. Hundreds of AnoPur units are in operation in anodizing facilities around the world. AnoPur is used to continuously remove dissolved aluminum from sulfuric acid anodizing baths in order to maintain the dissolved aluminum at a consistently low ...

    By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA). from Chemical Recovery/Purification - Aluminium Finishing Product line

  • Altek - Press Heads

    All ALTEK TARDIS Gen II Dross Press and Salt Slag models are fitted with a specially designed, cast steel press head, suited to the mould of the dross pan which has been ...

    By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Steel Castings Product line

  • Eco-Tec - Model APU - Acid Purification Unit for Metal Processing

    Eco-Tec has a range of products that have been developed specifically for treating acid baths used in the production of electrochemically etched aluminum capacitor foils and electrochemically grained aluminum lithographic printing plates. Leading manufacturers of capacitor foils and lithographic printing plates rely on Eco-Tec systems to maintain production quality and efficiency while reducing ...

    By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA). from Chemical Recovery/Purification - Aluminium Finishing Product line

  • Eco-Tec - Model CER - Removes Dissolved Aluminum from Caustic Soda Etchants Used in Processing Aluminum

    CER Removes dissolved aluminum from caustic soda etchants used in processing aluminum to reduce chemical and waste treatment costs. Etching or chemical milling with caustic soda can be the greatest operating expense in aluminum finishing operations. And with the increased focus on environmental concerns in all facets of the business, anodizes can look at recycling in their plants to reduce ...

    By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA). from Chemical Recovery/Purification - Aluminium Finishing Product line

  • Altek - Salt Slag Press

    ALTEK have developed a specialised salt slag press to extract as much aluminium out of slag as possible. Salt slag differs from aluminium dross due to it having a lower aluminium content and a higher temperature when taken out of the ...

    By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Products Product line

  • Tardis - Dross Presse

    ALTEK was the inventor of the dross press in the early 1990s and at that time had a relationship with a UK company called J M McIntyre, who distributed the ALTEK products. Following this the TARDIS press was initiated and the two systems from the same birthplace became available in the ...

    By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Products Product line

  • Eco-Tec - Model DPU - Recovers Phosphoric Acid & Mixed Acids

    Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of ...

    By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA). from Chemical Recovery/Purification - Aluminium Finishing Product line

  • Model EC-ECe Series - Expanders

    The EC series of continuous pre-expanders has been expanded beyond the simple and reliable traditional electromechanical models with great success through electronic models which, through the use of the latest technology available on the market, overcomes the parameter control problems during material change. In fact, thanks to the introduction of the electronic control system, the expansion ...

    By PoliMate S.r.l. based in Ponte Felcino (PG), ITALY. from Expanders Product line

  • Tardis - Model Gen II - Dross Presses

    to be the best technology for recovering aluminium units from dross and is the most widely used dross processing technology in the Aluminium ...

    By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from Products Product line

  • Pyrolysis for Aluminium Recovered

    Metals recovery from domestic and industrial waste is done due to two reasons, the first is to recover their economic value (metal and energy) and the second is to release them from their potential to contaminate the environment. Aluminum waste can comes from two channels: consumption waste either ...

    By Energy & Waste S.l based in Terrassa-Barcelona, SPAIN. from Waste Product line

  • AluSalt - Salt Slag Press

    Aluminium is, due to its properties, the second most used metal after iron. Recycling is a major aspect of continued aluminium use, with more than a third of all globally produced aluminium currently originating from old, traded and new ...

    By ALTEK Europe Ltd based in Chesterfield, UNITED KINGDOM. from AluSalt Product line

  • Recco - Metal Separation Plant

    In our facility in Emmeloord, we have engineered a unique dry metal separation installation with a capacity of 600 tons per week. For our relations, we recycle the non ferrous mixed streams into single streams of heavy metals and aluminium with extremely high purity rates. Our unique sorting and recycling ...

    By Recco Non Ferro Metals B.V. based in Emmeloord, NETHERLANDS.

  • Azanefreezer - Air Cooled Ammonia Condensing Unit

    This air cooled ammonia condensing unit provides a simple packaged solution for small to medium capacity cold stores. The units range from 111kW to 254kW and are designed for cold store temperatures ranging from -25°C to -18°C. Multiple modules can also be used for larger applications. The condensing unit can be located adjacent to the coolers or a distance away depending on the ...

    By Star Refrigeration based in Glasgow, UNITED KINGDOM.

  • Aluminium

    The aluminium is a very useful metal, 100% recyclable , which receives a multitude of uses in the most diverse sectors of activity. At Derichebourg Spain we take care of the purchase, sale and recycling of this material. Of all the aluminium obtained in the world, half comes from bauxite ore and the other half ...

    By Derichebourg Espana | Grupo Lyrsa based in Gandra, SPAIN. from Metals Product line

  • Magnapower - Drum Magnet Separator System

    Magnapower offer a range of Drum Magnets designed to continuously remove ferrous metals from non-magnetic material that is fed to the surface of the magnetic drum. We are able to specify and design a drum magnet suit your separation requirement, feed width, product size and ...

    By Magnapower Equipment Ltd. based in Bromsgrove, UNITED KINGDOM.

  • Model EP Series - Expanders

    The constant search for technological solutions and design to provide the market with quality machines at low cost, has produced this pre-expander that despite being 'low cost', maintains the technical characteristics of the first level. Our operating flexibility helps us create personalized installation configurations for machines that must be installed in small ...

    By PoliMate S.r.l. based in Ponte Felcino (PG), ITALY. from Expanders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you