ambient air analyzer Equipment

356 Results found
Only show results available in Virginia?
OK
  • Keyword: ambient air analyzer ×

Gasmet - Model DX4040 - Portable Ambient Air Analyzer

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet's DX4040 FTIR (Fourier Transform Infrared Spectroscopy) gas analyzer can detect 25 different gases simultaneously with results in just 25 seconds. The DX4040 has a library of measurable gases that can be changed easily through the systems interface. It can also be used for VOCs, TICs, waste anesthetic gases and unknowns. 

Tekran - Model 2537X - Automated Ambient Air Analyzer

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean ...

Environnement S.A. - Model MGC 101M - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

MGC 101 Multi-gas calibrator for ambient air gas analyzer calibration allows: Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to pointInternally-stored mass flow controller calibration data improves accuracy (factor of ten) ...

Tekran - Model 2537 CVAFS - Automated Ambient Air Analyzer

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Tekran® 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran® 2537 is easy to setup, use, and maintain and has long been known for its rugged performance. Our instruments have been installed at both Polar Regions, on ocean research vessels ...

TAPI - Model T108 - Total Sulfur Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T108 Total Sulfur analyzer is designed to measure mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2.

TAPI - Model T101 - UV Fluorescence H2S Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring.

Gasmet - Model DX4015 - Portable FTIR Gas Analyzer for Ambient Air Analysis

by Gasmet Technologies Oy     based in Helsinki, FINLAND

DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the DX4015 include a high sensitivity sample cell for lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system.

TAPI - Model T400 - UV Absorption O3 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T400 UV Absorption analyzer uses a system based on the Beer-Lambert law for measuring low ranges of ozone in ambient air.

TAPI - Model T102 - UV Fluorescence TRS Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T102 TRS analyzer uses the proven UV fluorescence principle to measure Total Reduced Sulfur at levels commonly required for ambient air monitoring.

TAPI - Model T201 - Chemiluminescence NH3 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T201 combines a specially configured chemiluminescence analyzer with an external thermal converter to give stable and repeatable NH3 measurements at very low levels. In addition, the T201 provides simultaneous values for NO, NO2, and NOx concentrations. The T201 is ideal for trace ammonia monitoring applications in ambient air as well as ...

TAPI - Model T500U - CAPS NO2 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The T500U CAPS NO2 Analyzer represents the next generation of criteria pollutant monitoring technology for the direct measurement of Nitrogen Dioxide (NO2) in air. The instrument utilizes a patented Cavity Attenuated Phase Shift (CAPS) technique to provide an extremely sensitive, fast and accurate NO2 measurement in a cost effective and low ...

TAPI - Model T108U - Ultra-Sensitive Total Sulfur Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T108U Total Sulfur analyzer is designed to measure ultra-low levels of mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2

HORIBA - Model APMC-370 - Air Pollution Multigas Calibrator

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Dilution of gases with high accuracy and precision requires high quality mfc’s, especially for high dilution ratios and ranges. Consequently HORIBA’s APMC-370 is equipped with digital mfc’s. These mfc’s are factory calibrated, optional also with a special Polynomial Calibration. HORIBA Europe‘s APMC-370 is designed to ...

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran - Model 1130 - Oxidized Mercury Speciation Module

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations in air. The Model ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

Tekran - Model 1100 - Zero Air Generator

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1100 Zero Air Generator provides Hg free air for up to two Model 2537 Mercury Vapor Analyzers. Using an included communication cable, the Model 1100 will only produce zero air when needed by the Model 2537 analyzer, greatly increasing the lifespan of the zero air filters. The Model 1100 eliminates the need of compressed gas ...

Tekran - Model 1120 - Standard Addition Controller

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be ...

Immission Analyzers

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Our portfolio for AQM (Air Quality Monitoring) applications consists of compact rack type analyzers designed for monitoring specific parameters in ambient air. Each of these systems has its proper operation principle optimized for one specific parameter, but all carry the same quality tag: high sensitivity, stability and reliability. The interface ...

Autosampler for Immission Applications

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The autosampler of the 'Ambient Air' product portfolio is a high performance, automated system for sampling airborne particulates and can also identify specific pollutants. Precision volumetric air flow control and 40 mm filtering diameter provides precision results, in compliance with European and US standards. A wide range of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you