Showing results for: Ambient Air Monitoring Equipment Available In Cuba
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
and stable instrumentation is needed to monitor N2O emissions in the atmosphere. This instrumentation was not commercially available up till ...
-
ShowcaseManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Polludrone is a fully integrated outdoor air quality monitoring system that delivers reference equivalent performance. Polludrone is a sensor-based air quality monitoring system for all the critical ambient environmental parameters related to air quality, noise, odour, weather, radiation. In ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
measurements for ambient air or for measurements in ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to measure the ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS provides a range of sensors for various applications, such as wind speed, wind direction, temperature, humidity, global radiation, and rainfall. They are specially designed to be easily integrated into an OPSIS monitoring system using OPSIS data logging hardware and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers a range of calibration equipment for use with the air quality monitoring systems. The system is based on the CB100 calibration bench. This is used with an external CA150 lightsource and with an RE060 receiver at each end of the bench itself. Calibration is carried out by inserting cells with transparent windows into the short ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-410 laser gas analyzer is an analyzer developed based on TDLAS technology platform. Conbined TDLAS Technology with Multi-reflection long optical path technology, it has lower detection limit, and can analyze multiple gases including trace CO, CH4,HCl,HF,etc. It is widely applicable to industrial and environmental online ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 855 CY analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 855 CY is modular designed and capable of sequentially measuring NO, NO2, NOX, NH3 and NOX-Amines. The new and intuitive graphical user interface also individually displays and connects to other instruments’ ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 66 Y is the next generation in single-channel ambient air monitoring instrumentation. Unique in speed and precision, the nCLD 66 Y is modular designed and capable of sequentially measuring NO, NO2 and NOX. The analyzers expandable capabilities allow assessment of additional nitrogen oxide based parameters. Its graphical user ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. The laser diode gas analyser provides very fast monitoring of a range of gaseous compounds. Several gases can be monitored and a multiplexer offers ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Polludrone Smart is an air quality monitoring device specially developed to monitor ambient air quality. The Polludrone Smart is a compact and connected CAAQMS which offers near real-time air quality data of all the National Air Quality Index (NAQI) parameters. The ease of ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Capable of anlaysing up to 32 compounds from C6-C12 (used in airmozone) or PAMS. The airmoVOC C6-C12 uses a valve with 1 sample trap. It also features a metalic capillary column. Miniaturization, sensitivity, mobility and flexibility are its main ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The WT256 collects data from OPSIS analysers and data loggers and pushes the data via FileTransfer Protocoll (FTP) or via file copy to a temporary storage site on a TCP/IP based network, such as the Internet. The data is downloaded automatically from the network storage site to one or several users, utilizing a download service installed on the target computer. Once downloaded, further data ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Real-time laboratory quality measurements within a portable package. A true multi-gas analyzer, the Shepherd FTIR standard gas detection libraries are built for common applications, including: air toxics monitoring, hospital and anesthetic gas monitoring , and refinery monitoring. The Shepherd FTIR is also capable of simultaneous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you