Showing results for: Ambient Air Monitoring Equipment Near Belize
-
Manufactured by AMETEK Process Instrumentsbased in USA
Available in two models, the ta3000 gas analyzer is an isothermal gas chromatograph that can be configured with a reduction gas detector or flame ionization detector. The analyzer offers extreme measurement sensitivity from parts-per-million (ppm) down to low parts-per-billion (ppb) levels, and negligible matrix effects from permanent gases. Combined with the separating power of gas ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS250DM is a PT-1000 Class-A air temperature sensor for temperature gradient and stability analysis. This sensor delivers extremely accurate and precise air temperature data that is necessary for IEC 61724 Class-A solar monitoring applications and Delta Temperature (ΔT) calculations. It also includes a digital Modbus RS-485 ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS LD500 Analyser is the central unit in the laser diode gas monitoring system. It can house up to four laser diode heads. Each head is a complete laser control and data sampling system. The laser diode gas analyser provides very fast monitoring of a range of gaseous compounds. Several gases can be monitored and a multiplexer offers ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Multiplexers are used when an OPSIS system includes more than one lightpath. The use of multiplexers allows a single system to handle several lightpaths, with the analyser’s computer automatically interrogating each in turn. Various models are available, depending on the number of ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM2.5 monitor version of OPSIS’ SM200 particulate monitor offers accurate and reliable automatic measurements of PM2.5 particulate fraction concentrations in ambient air, and sampling of the PM2.5 particulate fraction for later manual ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The WT256 collects data from OPSIS analysers and data loggers and pushes the data via FileTransfer Protocoll (FTP) or via file copy to a temporary storage site on a TCP/IP based network, such as the Internet. The data is downloaded automatically from the network storage site to one or several users, utilizing a download service installed on the target computer. Once downloaded, further data ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS AQM systems measure multiple gases in real time over an open path. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast response. One system can be configured to monitor NO, NO2, SO2, O3, BTX, NH3, CO, CO2, HF, H2O, CH4, Hg, HCl, among other gaseous compounds. A basic system ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS System Shelters give the optimal operation environment for the measurement equipment. They are designed for OPSIS air quality monitoring systems, used for example for traffic monitoring, and industrial fugitive emissions monitoring. Various container models are available, depending on the application and the extent of the ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers a range of calibration equipment for use with the air quality monitoring systems. The system is based on the CB100 calibration bench. This is used with an external CA150 lightsource and with an RE060 receiver at each end of the bench itself. Calibration is carried out by inserting cells with transparent windows into the short ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS OC500 ozone calibrator is used to calibrate OPSIS Air Quality Monitoring stations. The calibrator generates a well defined ozone concentration which could be preset by the user. It is designed to generate very high ozone concentrations, sufficient for performing accuracy audit and precision ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial communication. The hardware of the DL256 is based on modules. It is therefore easy to configure the system to meet a wide range of requirements, and the system can be upgraded by adding ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers a wide range of shelter models and configurations to guarantee the optimal operation environment for your measurement equipment. We have experience in all environments, from hot and humid, to ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS provides a range of sensors for various applications, such as wind speed, wind direction, temperature, humidity, global radiation, and rainfall. They are specially designed to be easily integrated into an OPSIS monitoring system using OPSIS data logging hardware and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex). Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dust monitoring in ambient air: control system areas, silo areas, boiler houses, work stations. AirSafe 2 is an electrodynamic dust sensor monitoring leakages and dust concentration in ambient air in production facilities or workplaces. This versatile sensor allows you to keep under ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you