ambient air sampling Equipment

569 Results found
Only show results in Virginia?
OK
  • Keyword: ambient air sampling ×

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

Tekran - Model 1130 - Oxidized Mercury Speciation Module

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations in air. The Model ...

Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 2505 mercury vapor calibration unit was designed to provide a traceable external standard to audit the Tekran 2537 internal mercury calibration source. However, the Model 2505 provides an accurate and reproducible means of injecting a known quantity of elemental mercury vapor into any analytical system. Since the saturation vapor ...

Tekran - Model 1120 - Standard Addition Controller

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1120 Standard Addition Controller allows both standard additions and blanks to be performed at user programmed intervals while using the Model 2537 Mercury Vapor Monitor. Standard additions are accomplished by timed activation of the Model 2537 internal calibration source and zero air selector valves. Standard additions can be ...

Tekran - Model 1135 - Particulate Mercury Unit

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended ...

Gasmet - Model DX4040 - Portable Ambient Air Analyzer

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet's DX4040 FTIR (Fourier Transform Infrared Spectroscopy) gas analyzer can detect 25 different gases simultaneously with results in just 25 seconds. The DX4040 has a library of measurable gases that can be changed easily through the systems interface. It can also be used for VOCs, TICs, waste anesthetic gases and unknowns. 

HORIBA - Model APNA-370 - Ambient NOx Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APNA-370 continuously monitors atmospheric NOX, NO2, and NO concentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and ...

TAPI - Model T108 - Total Sulfur Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T108 Total Sulfur analyzer is designed to measure mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2.

TAPI - Model 651 - Ultrafine Particle Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Ultrafine particle (those less than 100nm, or 0.1µm in size) are produced through combustion activities and are persistent in all ambient air. Concentrations of these tiny particle can be very high near emissions sources (for example, near busy roads), and both acute and chronic exposure are believed to lead to health problems. As part of ...

Hi-Q - Model CF-995B - Variable Speed, Internal Battery & Charger, AC/DC Relay

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q has incorporated a high efficiency, variable speed circuit in its CF-995B, battery operated air sampler series which allows its users to preset flow rates by varying the blower motor speed. The CF-995B & CF-995B-4 are ideal for adjustable flow, remote location air sampling where AC line power is not available. An internally mounted ...

Hi-Q - Model CF-993B - Fixed Speed, Internal Battery & Charger

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's CF-993B & CF-993B-4 are ideal for remote location air sampling where line power is not available. An internally mounted sealed 12 Volt battery and battery charger eliminate the need for the transportation of cumbersome battery cables and the awkward handling of heavy batteries. The timer has 10 programmable timing functions with a wide ...

TAPI - Model T108U - Ultra-Sensitive Total Sulfur Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T108U Total Sulfur analyzer is designed to measure ultra-low levels of mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2

TAPI - Model T640 - PM Mass Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Teledyne API announces the next breakthrough in ambient particulate air monitoring, the Model T640 PM Mass Monitor. Delivering continuous, real-time PM10, PM2.5, and PM10-2.5 mass measurements using innovative broadband spectroscopy, the instrument has fast response, exceptional precision and sensitivity. The instrument uses very little power and ...

TAPI - Model T400 - UV Absorption O3 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T400 UV Absorption analyzer uses a system based on the Beer-Lambert law for measuring low ranges of ozone in ambient air.

Protea - Model atmosFIRw - Wall-mounted Multigas Analyser for Ambient Air and Process Monitoring

by Protea Limited     based in Middlewich, UNITED KINGDOM

atmosFIR is the latest generation of gas analyser technology from Protea. The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today

TAPI - Model T201 - Chemiluminescence NH3 Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T201 combines a specially configured chemiluminescence analyzer with an external thermal converter to give stable and repeatable NH3 measurements at very low levels. In addition, the T201 provides simultaneous values for NO, NO2, and NOx concentrations. The T201 is ideal for trace ammonia monitoring applications in ambient air as well as ...

HORIBA - Model APDA-371 - Ambient Dust Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring platforms in the ...

F&J - Model DF-1 Series - Portable Air Sampling System (110V)

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

The Model DF-1 portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass ...

Related Terms for ambient air sampling

Need help finding the right suppliers?

Let the XPRTs do the work for you