ambient particulate monitoring equipment

The Model T640 PM Mass Monitor is the next breakthrough in ambient particulate monitors. The T640 delivers 1-min or better time resolution with exceptional sensitivity and precision. The instrument is very low maintenance and requires no sample media for minimal cost of operation.

By Teledyne API based in San Diego, CALIFORNIA (USA). from Particulate Instruments Product line

The TEOM 1405 distinguishes itself from other PM measurement methods by utilizing a direct mass measurement that is not subject to measurement uncertainties found in other surrogate technologies. It provides a self-referencing, NIST traceable direct mass measurement.

By Lear Siegler Australasia Pty. Ltd. (LSA) based in Mount Waverley, AUSTRALIA. from Particulate Monitoring Product line

Consisting of a TEOM mass sensor and control unit in a network ready configuration, the TEOM 1405-D distinguishes itself from other PM measurement methods by utilizing a direct mass measurement that is not subject to measurement uncertainties found in other surrogate technologies. It provides a self-referencing, NIST traceable direct mass ...

By Lear Siegler Australasia Pty. Ltd. (LSA) based in Mount Waverley, AUSTRALIA. from Particulate Monitoring Product line

Our Micro Pulse LiDARs use photon-counting detectors with high quantum efficiency at the chosen wavelength, coupled with high pulse rate, lower energy per pulse lasers. When combined with extremely stable optics this efficient approach to photon management leads to much higher sensitivity than big pulse alternatives for detecting and ...

By Micro Pulse LiDAR, part of Hexagon based in Lanham, MARYLAND (USA).

Take continuous direct mass measurements of particulates using a tapered element oscillating microbalance (TEOM) with the Thermo Scientific™ 1405 TEOM™ Continuous Ambient Particulate Monitor. This monitor measures TSP, PM-10, PM-2.5, and PM-1 airborne particulates with excellent short term precision.

By Thermo Fisher Scientific based in Waltham, MASSACHUSETTS (USA). from Air Quality and Water Analysis Product line

Initially designed by the French Atomic Energy Commission (CEA).

By ENVEA based in Poissy, FRANCE. from Radionuclide Monitoring Product line

The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, unattended ...

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Ambient Air Product line

Advanced FH62 systems provide continuous automatic, real-time ambinet particulate measurement and are ideal for air quality measurement and for air quality networks. They can be configured for TSP, PM10, and PM2.5 sampling. Extremely accurate and insensitive to vibration, they are the only beta gauges with a truely continuous 60-minute to ...

By Thermo Scientific - Air Quality Instruments based in Franklin, MASSACHUSETTS (USA). from Air Quality Monitoring: Ambient Particulate Analyzers Product line

The Partisol-FRM Model 2000 Air Sampler is USEPA reference method designated for both PM-2.5 and PM-10. It is the proven manual sampling platform for the USEPA PM-2.5 standard. It is based upon the original Partisol Air Sampler, which received the USEPA reference designation for PM-10 measurements in June 1994.

By Thermo Scientific - Air Quality Instruments based in Franklin, MASSACHUSETTS (USA). from Air Quality Monitoring: Ambient Particulate Analyzers Product line

The Model 5012 MAAP measures the aerosol-related absorption of light and the corresponding atmospheric black carbon mass concentration. Continuous data is provided by a multiple detector setup to simultaneously measure the transmitted and the scattered light from a particle-loaded filter. Typical applications include determining ambient ...

By Thermo Scientific - Air Quality Instruments based in Franklin, MASSACHUSETTS (USA). from Air Quality Monitoring: Ambient Particulate Analyzers Product line

The manual dichotomous sampler is used for routine compliance montoring for PM10 and PM2.5. The Dichotomous sampler operates at a flow rate of 1 CHM (16.7 LPM) and is available with built-in mechanical 6-day or 7-day times, or an electronic digital programmable timer.

By Thermo Scientific - Air Quality Instruments based in Franklin, MASSACHUSETTS (USA). from Air Quality Monitoring: Ambient Particulate Analyzers Product line

The system can be used as on road and off road application. Heavy duty vehicle (HDV) such as commercial vehicles, busses, generators and ships are the main target group of the DYNTEST system. Vehicle data and data from diesel particulate filters are monitored, controlled and logged.

By CPK Automotive GmbH & Co KG based in Muenster, GERMANY. from Dyntest - Monitoring Product line

PUF for Pesticide Particulate/Vapor Air Sampler: Complete with outdoor anodized aluminum PUF shelter, aluminum blower motor assembly, 4' particulate/vapor sampling module, flow venturi calibration valve system, 0-100' magnehelic gage, motor voltage control/elapsed time indicator, (10' exhaust hose, and 7-day mechanical timer (110v/60hz or ...

By Tisch Environmental Inc. - Tisch International based in Cleves, OHIO (USA). from PUF (PolyUrethane Foam) Sampler/VOC Ambient Monitors Active and Passive Product line

The Protinus 1000 provides a particulate monitor ideally suited for continuous monitoring around mines, quarries, construction and other dust generating activities. The Protinus 1000 utilises size speicifc inlets to ensure accurate real-time dust measurements at suspended solids, PM10 or PM2.5 size fractions. he Protinus 1000 can be combined with ...

By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA. from Particulates - Ambient Product line