Ammonia Detector Equipment
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-507 is a CO2, PM2.5, PM10 and Ammonia multi-gas detector designed for indoor agriculture applications like poultry farms. Large easy-to-read display and audible alarm for high CO2 levels included. Built-in data logging allows all information to be recorded on a removeable SD card for data analysis. ...
-
Manufactured by Forensics Detectorsbased in USA
The most professional ammonia gas detector by FORENSICS DETECTORS. Equipped with electrochemical sensors and comes factory-calibrated. The detection range of NH3 is 0 - 100ppm within 30 seconds at an accuracy of +/- 5% full-scale. Comes factory NIST calibrated from Los Angeles, CA. The detector has a DC3.7V Li-battery 1500mAh ...
-
Manufactured by Evikon MCI OUbased in ESTONIA
Ammonia detector-transmitter E2608-NH3-E is a member of new PluraSens® family of multifunctional measurement instruments. The instrument is intended for leakage control in refrigeration facilities, warehouses etc. It is not recommended to use the device in spaces with constantly high ammonia concentration such as cattle, pig and ...
-
Manufactured by EDS srl Electronic Detection Systemsbased in ITALY
Gas detector for Ammonia. Explosion proof Ex-d execution. ATEX certified. Microprocessor control. Automatic zero compensation. Analog output 0-5V. Optional output 4-20mA ...
-
Manufactured by Dega CZ s.r.o.based in CZECH REPUBLIC
DEGA DV III-x is used to measure leakage of ammonia into water in ducts, tanks, piping etc. The detection system of Ammonia leakage consists of the relevant DEGA DVA III-x detector, the interconnecting cable and the DEGA NZV III converter. The probe is a PH electrode in a housing adapted to be placed in a pipeline. The DEGA NZV III is ...
-
Manufactured by Consilium Marine & Safety Canadabased in CANADA
ST650EX NH3 0-10 % Lel Gas ...
-
Manufactured by Calibration Technologies, Inc.based in USA
Industrial Gas Detector for Ammonia (NH3); designed for harsh industrial environments in the food industry including: food processing, blast freezers, engine rooms, fishing vessels, outdoor locations, and more. ...
-
Manufactured by Neodym Systems Incbased in CANADA
Knowz™ gas detectors are simple analog "go-no go" devices intended for non-hazardous locations. Various versions are available to monitor combustible gases as well as refrigerant gases and ammonia. Options include 5VDC, 9-12VDC, 7-40VDC, or 7-60VDC powering, dry relay contacts, alarm beeper. Relay types include: SPST (NO or NC) and ...
-
Manufactured by ATO Automationbased in USA
Low price handheld pumping-type gas detector provides the Ammonia (NH3) gas leak monitoring with high accuracy sensor, audible and visual alarm, optional measuring range 0 to 50ppm, 0 to 100ppm, 0 to 200ppm, 0 to 500ppm etc., LCD display, easy readout, small & portable design, convenient to ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-510 is a Multi-Gas Meter designed to measure multiple gas concentrations in a wide range of industries and applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
ammonia detector on the ...
-
Distributed by Spantech Products LTDbased in UNITED KINGDOM
for calibration of nearly any ammonia detector on the market. Compact, handheld, accurate, economical and rugged, this family of integrated and expandable calibration gas instruments will generate a variety of gases from one modular instrument. As your calibration gas needs grow, so does the GENie, with integrated, expandable modules that provide for a ...
-
Manufactured by Forensics Detectorsbased in USA
The FORENSICS basic ammonia detector is made to be a workhorse with its easy one-button operation. Turn ON and detect immediately with no complicated setup. The detector is constructed with a high-quality electrochemical sensor made in Japan. Comes factory-calibrated. Ammonia is a toxic gas that requires continuous detection to ...
-
Manufactured by JCS Industries, Inc.based in USA
The Model LD100 is a gas leak detector to be used for monitoring atmospheric content of hazardous gases, specifically chlorine, sulfur dioxide, or ammonia. The detector has selectable alarm points to activate a contact closure output for control of external devices such as automatic actuators, alarm lights, sounding devices, or remote signals ...
-
Manufactured by Calibration Technologies, Inc.based in USA
Handheld Ammonia gas detector used for detecting all levels of ammonia for leaks and hazmat response. Detection range from 0-100% LEL of Ammonia (PID: 0-1,000 PPM NH3) (LEL: 4,500 to 150,000 PPM NH3)). Includes Oxygen sensor with range of 0-25% O2 (vol). Smaller and lighter than competitive instruments. Water-resistant design in ...
-
Manufactured by Samonbased in SWEDEN
Detectors intended for installation in engine rooms, cold rooms or other spaces where gas is used, handled or stored. The ‘TR-Series’ is specifically designed for MPU and SPU/SPLS monitoring ...
-
Manufactured by Calibration Technologies, Inc.based in USA
Gas Detector for Ammonia and other toxic gases; explosion proof enclosure designed for classified areas. Explosion-proof enclosure for classified areas. Target Gas selective sensor technology. Circuit board sealed in potting material to protect sensitive sensor components and copper tracing from corrosion. Designed for installation in ...
-
Manufactured by Bete, Gas Scrubber Division of Trevi nvbased in BELGIUM
Ammonia (NH3) is a frequently used gas with a typical smell. It damages copper and its alloys, and must therefore be kept away from copper ...
-
based in INDIA
NEO Monitors new LaserGas™ III Open Path NH3 Gas Detector is specifically designed for service in hazardous areas. Based on our third generation LaserGas™ Technology, the entire instrument is built into compact flameproof enclosures making it fit for zone 1 applications. The LaserGas™ III NH3 OP consists of a ...
-
Manufactured by JXCTbased in CHINA
RS485 large screen ammonia sensor equipment can monitor ammonia data in real time, and use wireless network for transmission. The product network transmission adopts stable and reliable operator network, mature technology, stable transmission, strong signal and wide coverage. Meanwhile, the device can periodically collect data and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you