Only show results available in Virginia? Ok

ammonia ion-selective probe equipment

  • Model 201040 - Ammonia Sensitive Sensor

    This probe is used to measure ammonia (NH3) in aqueous solutions. In an aqueous solution, ammonia is in a pH dependent balance with ammonia ions (NH4+-Ionen). If the NH4+ ions are transformed into ammonia by the addition of a caustic solution, the probe will record the resulting ammonia. NH4+ ions as such will not be recorded.

    By JUMO GmbH & Co. KG based in Fulda, GERMANY. from Ammonia Sensitive Sensor Product line

  • ABB - Ammonia Analyzers

    Whether you are measuring ammonia in municipal water treatment, rivers, boiler feed water or industrial effluent ABB has an analyzer to suit your application. The 8232 Ammonia Analyzer uses an ABB ion-selective probe to determine the ammonia concentration. It offers reliable and accurate on-line analysis of ammonia up to 1000 ppm. The Aztec 600 ...

    By ABB Measurement Products based in Zurich, SWITZERLAND. from Ammonia Analyzers Product line

  • Model 201040 - Ammonia Sensitive Sensor

    This probe is used to measure ammonia (NH3) in aqueous solutions. In an aqueous solution, ammonia is in a pH dependent balance with ammonia ions (NH4+-Ionen). If the NH4+ ions are transformed into ammonia by the addition of a caustic solution, the probe will record the resulting ammonia. NH4+ ions as such will not be recorded. The ammonia sensor ...

    By JUMO GmbH & Co. KG based in Fulda, GERMANY. from Ammonia Sensitive Sensor Product line

  • Tethys Instruments - Model UV400 - Online Water Analyzer

    The UV400, based on a modular concept, allows to monitor simultaneously many different parameters for waste water or drinking water treatment plants as well as river monitoring stations. Each parameter corresponds to a specific optical module that can be selected by the user while ordering the analyser, depending on the application. Mainly based ...

    By Tethys Instruments SAS based in Meylan, FRANCE. from Online Water Analyzer Product line

  • Manta - Model 2 - pH Sensors

    pH is a measurement of water's acidity or alkalinity. Water with pH less than seven is acidic; water with pH greater than seven is alkaline (basic). The pH of water is determined by dissolved, pH-active salts. For instance, dissolving sodium hydroxide in pure water will increase the pH because the hydroxide ion is a pH-active base, and dissolving ...

    By Eureka Water Probes based in Austin, TEXAS (USA). from pH Sensors Product line

  • Tethys Instruments - Model UV400 ATEX - Online Water Analyzer for Ex Area

    The UV400 ATEX, based on a modular concept, allows to monitor one or several parameters for process water, cooling water or waste water. The special enclosure and air purge system allows to use it on hazardous areas classified 'Ex' like refineries and chemical plants. Mainly based on UV spectroscopy, well known for its stability and low operating ...

    By Tethys Instruments SAS based in Meylan, FRANCE. from Online Water Analyzer for Ex Area Product line

  • Model G4100 - NOx/O2 Analyzing System

    Green Instruments’ NOx analyzer – the G4100 NOx/O2 Analyzing System – is a direct in situ gas analyzer that monitors NOx and O2 concentrations in emission gas. The NOx analyzer provides a cost-effective solution to help fulfill tightening emission regulations as well as supporting the most effective operation for all ...

    By Green Instruments A/S based in Br√łnderslev, DENMARK. from NOx/O2 Analyzing System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you