Only show results available in Connecticut? Ok

anemometer cup equipment

  • Premium

    Aadcon - Model Pro10 - Professional Wind Speed Sensor

    This highly professional wind speed sensor is manufactured for Adcon by one of Germany's most reputed sensor manufacturers. The housing is made of extremely robust, seawater resistant aluminum, to withstand even the harshest of conditions.

    By OTT HydroMet based in Kempten, GERMANY. from Adcon - Sensors Product line

  • Kintech - Thies Small Wind Transmitter

    Small and cost effective cup anemometer for measuring the horizontal wind speed. The cup anemometer is mounted in a ball-bearing shaft and leads a magnet past the reed contact resulting in a frequency proportional to the number of rotations of the cup anemometer. This cup anemometer can e.g. be used for solar measurement campaigns.

    By Kintech Engineering based in Zaragoza, SPAIN. from Sensors Product line

  • Dyacon - Anemometer Cup and Hub Assembly

    Anemometer Cup Assembly Replacements for Dyacon WSD-1 wind sensors. Cup and spoke assemblies can easily be replaced in the field using a 2.0 mm hex driver (Allen key). The spokes are anodized aluminum and pres-fit to UV-stabilized polycarbonate cups. Cup assemblies are available in a set of three.

    By Dyacon, Inc. based in Logan, UTAH (USA). from Repair Parts Product line

  • Wind Speed Profiling

    Spinning Cup Anemometer Basics - Wind speed and direction are basic parameters typically collected at weather / meteorological data collection sites. One of the most common methods for measuring wind speed is with a wind driven spinning device called a cup anemometer. The spinning cup anemometer consists of three (typically) conical shaped cups ...

    By Logic Beach Inc based in La Mesa, CALIFORNIA (USA). from Applications Product line

  • Premium

    Aadcon - Model Pro10/2 - Wind Speed and Direction Sensors

    The ADCON Wind Sensor Set Professional is not only an extremely accurate set of sensors, it is also extremely robust, fully made of anodized aluminum, with no plastic parts. Both sensors have a very low onset speed, but can withstand wind gusts of up to 75m/s even at extremely low temperatures. Built to last, these sensors are fit even for marine ...

    By OTT HydroMet based in Kempten, GERMANY. from Adcon - Sensors Product line

  • Premium

    Aadcon - Model Vento1 - Wind Speed and Direction Sensors

    The ADCON Wind Sensor Set Vento 1 is tailor made for meteorological applications that require a maximum of accuracy over an extended measurement range, integrated into a very robust, yet low-maintenance body made of seawater resistant aluminum.

    By OTT HydroMet based in Kempten, GERMANY. from Adcon - Sensors Product line

  • Pulsonic - Model Alizia 312 - Wind Intelligent Sensor

    The Alizia 312 sensors include one anemometer with cups and one vane with flag in carbon fibre. They are powered by one solar panel. The sensors make speed and direction measurements twice a second and make the necessary calculations to the wind according to the W.M.O. and I.C.A.O. rules.

    By Pulsonic based in Orsay, FRANCE. from Wind Sensors Product line

  • 200-18312 Cup-Wheel Torque Disc

    The 200-18312 Cup-Wheel Torque Disc checks cup anemometer bearing torque.

    By NovaLynx Corporation based in Grass Valley, CALIFORNIA (USA). from Wind Speed and Direction Sensors Product line

  • 200-18310 Propeller Torque Disc

    The 200-18310 Propeller Torque Disc checks anemometer bearing torque with 0.1 gm/cm resolution. The disc temporarily replaces the propeller for torque measurement or simple yet accurate pass/fail checks. Charts included with the unit relate torque to propeller threshold with limits for acceptable bearing performance. The 200-18312 Cup-Wheel Torque ...

    By NovaLynx Corporation based in Grass Valley, CALIFORNIA (USA). from Wind Speed and Direction Sensors Product line

  • Model WN37, WNZ37, WMSC37 - Anemometers

    Wind gauges WN37 and WNZ37 measure the east/west and north/south wind components, allowing the calculation of horizontal wind velocity.  The WNZ37 measures the vertical component of wind as well.  If only wind speed (and not wind direction) is of interest, then the WMSC37 cup anemometer is the most suitable instrument for your ...

    By Meteolabor AG based in Wetzikon, SWITZERLAND. from Wind Product line

  • Model WE-1100 - Sonic Anemometer

    The Model WE-1100 Sonic Anemometer (P/N 102779) is designed for ambient wind sensing in harsh environment industrial applications as a direct replacement for conventional mechanical propeller and cup anemometers, both in terms of performance and cost. It requires no periodic maintenance or calibration.

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA). from Wind Speed and Direction Product line

  • Model EE-04 - Wind Sensor

    The EE-04 Wind Sensor includes both wind speed and wind direction sensors The rugged components with sealed stainless –steel bearings for long life can stand up to hurricane-forced winds and yet are sensitive to a light breeze The EE-04 Wind Sensor used by a three cup anemometer is a low cost with high performance sensor which matches and ...

    By Jauntering International Corporation based in Wu Gu, TAIWAN.

  • Model 110-200 - Wind Speed Recording System

    A complete system for measuring and recording wind speed over extended periods of time. It can be placed in any field, roof or windy area to measure instantaneous or average wind speed data. Data may be displayed in standard or metric units. System includes a 3-cup anemometer with 25 foot cable, (longer cable lengths available up to 200') the ...

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA). from Wind Speed and Direction Product line

  • Virtual - Cup Counter Anemometer

    Cup Counter Anemometers are made by the gifted hands of our work force manufactured as per IS : 5912 : 1970 for measuring wind velocity or Wind Run. With the help of our capable employees we are able to create optimum-grade products of products which are offered in quality standards to our valued clients in affordable prices. Specifications: ...

    By Virtual Hydromet based in Roorkee, INDIA.

  • Model 0227 - Cup Anemometer

    Rugged and precise sensor for the measurement of the horizontal component of the wind speed. Driven by the flow, the cups are set into rotation. A light barrier scans an optical disc in the interior of the sensor and provides a frequency linearly dependent on the wind speed. The sensor meets the latest requirements of MEASNET and IEC 61400-12 for ...

    By Wilmers Messtechnik GmbH based in Hamburg, GERMANY. from Sensors - Wind Product line

  • Model 0228 - Cup Anemometer

    Rugged and precise sensor for the measurement of the horizontal component of the wind speed. Driven by the flow, the cups are set into rotation. A light barrier scans an optical disc in the interior of the sensor and provides a frequency linearly dependent on the wind speed.A built-in electronical heating prevents the bearings and the rotating ...

    By Wilmers Messtechnik GmbH based in Hamburg, GERMANY. from Sensors - Wind Product line

  • 200-2030 Micro Response Anemometer

    The 200-2030 Micro Response Anemometer is a highly responsive and rugged 3-cup anemometer designed to measure very low wind speeds (0.5 mph threshold). It is constructed entirely of stainless steel and anodized aluminum to resist corrosive environments. Like its wind vane counterpart, the micro response anemometer has an aerodynamically shaped ...

    By NovaLynx Corporation based in Grass Valley, CALIFORNIA (USA). from Wind Speed and Direction Sensors Product line

  • Belfort - Model 010C - Wind Speed Sensor

    The 010C Wind Speed Sensor provides accurate and detailed information on horizontal wind speed. The lightweight three-cup anemometer is used in virtually all applications where fast response and low starting threshold are of paramount importance. Both wind speed and wind direction sensors are used in environments ranging from Antarctic cold to ...

    By Belfort Instruments based in Baltimore, MARYLAND (USA). from Ambient Meteorological - Wind Product line

  • WindMark - Model III - Wind Sensors

    Climatronics WindMark III combines accuracy and reliability with low cost. They are well suited for general wind monitoring applications. Windspeed is sensed by a three-cup anemometer and converted to an electrical signal by a solid-state photo chopper. A counter balanced wind vane coupled to a precision, low torque potentiometer senses wind ...

    By Wittich & Visser bv based in Rijswijk, NETHERLANDS. from Wind - Wind Sensors Product line

  • Model TV-114 - Wind Speed Sensor

    The Texas Electronics, Inc. TV-114 Wind Speed Sensor is a mechanical style anemometer that measures the horizontal velocity of wind. The sensor is intended for long-term, maintenance-free operation. The TV-114 wind speed sensor is a freestanding device for measuring air velocity. The sensor consists of a lightweight 3-cup anemometer, which is ...

    By Texas Electronics Inc. based in Dallas, TEXAS (USA). from Wind Speed & Direction Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you