anemometer data equipment

This highly professional wind speed sensor is manufactured for Adcon by one of Germany's most reputed sensor manufacturers. The housing is made of extremely robust, seawater resistant aluminum, to withstand even the harshest of conditions.

By OTT HydroMet based in Kempten, GERMANY. from Adcon - Sensors Product line

This is the newest ultrasonic anemometer in the Meteorological Instruments Product Line.  The Ultrasonic Anemometer offers greater accuracy and reliability than mechanical cups and vanes.  This meteorological instrument is designed for government and educational institutions doing studies in meteorological fields.

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

The 'Vx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer is a compact design for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within the probe bar. It operates on DC power with a power consumption ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

Very high accuracy Display of air velocity in fpm or mps Display of temperature on °F or °C Memory circuit for maximum, minimum and average Display of calculated dewpoint in °F or °C Data acquisition for up to 1000 triple measurements Serial output through standard RS232C data-link Automatic display and battery test User-friendly keypad for simple ...

By Kernco Instruments based in EL Paso, TEXAS (USA).

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

The 'Sx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for environmental monitoring where the horizontal wind measurements are required to be in the same plane.  The W component measurement on the upwind side of the probe provides the most accurate and unobstructed value of ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A ...

By METEK Meteorologische Messtechnik GmbH based in Elmshorn, GERMANY. from uSonic- Sonic Anemometer Product line

The 'K' style Sonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for atmospheric boundary layer studies. The design of this probe minimizes flow distortion errors.  The electronics are contained within the probe bar. It operates on DC power with a power consumption of about 10 ma ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

The 'V' style Ultrasonic Anemometer is a 3 axis, 3d, 10 cm, scientific Ultrasonic Anemometer that is a special design for turbulence, where eddy measurements must be the smallest, for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

The AN340 is a CMM/CFM Anemometer/Psychrometer Data logger. This meter measures Air Velocity/Volume, Temperature, Humidity, Wet Bulb, and Dew Point. User can store up to 12,000 readings for data analysis. Manually store/recall up to 99 reading. Complete with external mini vane probe, Windows compatible software, USB cable, 6 AAA batteries, and ...

By FLIR Commercial Systems Inc - Extech Instruments based in Nashua, NEW HAMPSHIRE (USA). from Air Flow Meters Product line

Anemometer for measuring temperature up to 175°F (80°C) and airspeed to 6890ft/min. The 407113 CFM Metal Vane Anemometer measures Air Velocity from 100 to 6890 ft./min, 0.5 to 126 m/sec, 1.8 to 126 km/hr, 1.1 to 78.3 mph, and 1.0 to 68 knots with an accuracy of ±2% Of Velocity. Meter also measures 0 to 999,900 Cubic Feet Per Minute, ...

By FLIR Commercial Systems Inc - Extech Instruments based in Nashua, NEW HAMPSHIRE (USA). from Air Flow Meters Product line

The Scarlet WL-11 Wind Speed Data Logger is designed to provide an affordable and easy-to-use solution to wind site evaluation and monitoring wind generator performance in real time. It records wind speed, gust, and direction, time and date, temperature, and other important wind parameters. The wireless transmission ranges up to 250 meters or 1200 ...

By Scarlet Tech Ltd. based in Taipei City, TAIWAN. from Wireless Anemometer Product line

Originally designed for marine environments, the P2546-OPR is ideally suited for wind resource assessment and power performance studies both onshore and off. RNRG offers two versions of the P2546-OPR sensor: the P2546C-OPR (coil version) and the P2546A-OPR (reed switch). Both versions of the sensor are fully compatible with all Symphonie series ...

By NRG Systems based in Hinesburg, VERMONT (USA). from Met Sensors Product line

Hot Wire Anemometer with two miniature glass-bead thermistors provides greater precision at low air velocities. Telescope probe expands from 9.2 inches to 3 feet for hard-to-reach places. Eliminate friction errors caused by rotating vanes with this no-moving parts. Serial RS-232 output allows anemometer to be connected to a computer or data logger ...

By Apex Instruments, Inc. based in Fuquay-Varina, NORTH CAROLINA (USA). from Flow, Pressure, and Temperature - Anemometers Product line