anemometer temperature equipment

The 'Sx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for environmental monitoring where the horizontal wind measurements are required to be in the same plane.  The W component measurement on the upwind side of the probe provides the most accurate and unobstructed value of ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

This is the newest ultrasonic anemometer in the Meteorological Instruments Product Line.  The Ultrasonic Anemometer offers greater accuracy and reliability than mechanical cups and vanes.  This meteorological instrument is designed for government and educational institutions doing studies in meteorological fields.

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

The 'Vx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer is a compact design for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within the probe bar. It operates on DC power with a power consumption ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

The 'K' style Sonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for atmospheric boundary layer studies. The design of this probe minimizes flow distortion errors.  The electronics are contained within the probe bar. It operates on DC power with a power consumption of about 10 ma ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

The 'V' style Ultrasonic Anemometer is a 3 axis, 3d, 10 cm, scientific Ultrasonic Anemometer that is a special design for turbulence, where eddy measurements must be the smallest, for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained within ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Ultrasonic Anemometers Product line

Various side-mounting arms are available which can be used to mount an anemometer, windvane, or temperature/humidity sensor part-way up a mast or pole. Our 405-OM offset mount (see below) can be used to mount a T351 sensor/screen at the centre of a 405-1 dual-mounting arm at a mast-top.

By Vector Instruments (Wind Speed Limited) based in RHYL, UNITED KINGDOM.

Very high accuracy Display of air velocity in fpm or mps Display of temperature in °F or °C Memory circuit for maximum, minimum and average Measuring time every 2 seconds Average calculated over 16 seconds Max and Min over current measuring session Data acquisition for up to 1000 double measurements Max and Min over acquired values Serial output ...

By Kernco Instruments based in EL Paso, TEXAS (USA).

For use with Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.). Measures solar radiation and is required (along with an anemometer and a temperature/humidity sensor) if you wish to monitor evapotranspiration.

By Davis Instruments Corp. based in Hayward, CALIFORNIA (USA). from Weather - Sensors Product line

Testo 405 Thermo-Anemometer is an economical way to get highly accurate hot-wire velocity measurements (metric units m/s only). This mini-anemometer also measures air temperature and enables entry of duct cross-sectional areas for volumetric flow rates (metric units only). 

By MeterMall USA based in Marysville, OHIO (USA). from Air Flow / Anemometers - Hot Wire Anemometers Product line

Dantec Dynamics offers a complete probe system for use with Constant Temperature Anemometers (CTA). The CTA anemometer is today's most widely used instrument for measurement and analysis of the micro-structures in turbulent gas and liquid flows. The CTA probe program comprises a variety of probe types and probe configurations. There is a probe for ...

By Dantec Dynamics based in Skovlunde, DENMARK. from Fluid Mechanics Product line

EE65 air velocity transmitters are ideal for accurate ventilation control applications. They are operating on an innovative hot film anemometer principle. The E+E thin film sensor guarantees very good accuracy at low air velocity, which is not possible for conventional anemometers with commercial temperature sensors or NTC bead thermistors. EE65 ...

By E + E Elektronik Ges.m.b.H based in Engerwitzdorf, AUSTRIA. from Measuring Air Velocity Product line

Anemometer for measuring temperature up to 175°F (80°C) and airspeed to 6890ft/min. The 407113 CFM Metal Vane Anemometer measures Air Velocity from 100 to 6890 ft./min, 0.5 to 126 m/sec, 1.8 to 126 km/hr, 1.1 to 78.3 mph, and 1.0 to 68 knots with an accuracy of ±2% Of Velocity. Meter also measures 0 to 999,900 Cubic Feet Per Minute, ...

By FLIR Commercial Systems Inc - Extech Instruments based in Nashua, NEW HAMPSHIRE (USA). from Air Flow Meters Product line

With Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000 ft. (300m) from your wireless console/receiver). With Envoy8X, you can use this kit with any of our sensors including solar radiation, UV, temperature, anemometer, rain and third-party sensors that ...

By Davis Instruments Corp. based in Hayward, CALIFORNIA (USA). from Weather - Sensors Product line

6162 Kanomax Hot Air Anemometer--the industry standard for measuring velocity of hot air up to 752 deg F and the instrument of choice for checking air movement in blast furnaces, smelters, annealing ovens, exhaust systems, chimneys and stacks.  Choose from three interchageable high temperature probes for different applications and temperature ...

By MeterMall USA based in Marysville, OHIO (USA). from Air Flow / Anemometers - Hot Wire Anemometers Product line

The 45158 is a waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging function of 5, 10, or 13 second intervals. Fold up protective housing extends to 9 in. (229mm) for a better reach. Tripod ...

By FLIR Commercial Systems Inc - Extech Instruments based in Nashua, NEW HAMPSHIRE (USA). from Air Flow Meters Product line

The Type 8626 mass flow controller forms an integrated system, consisting of the flow sensor, control electronics and control valve. Using this controller, mass flows of gases can be kept constant or can follow a predefined set-point profile regardless of interfering influences (such as pressure or temperature variations). The sensor works ...

By Burkert Fluid Control Systems based in Huntersville, NORTH CAROLINA (USA). from Mass Flow Controllers Product line

Waterproof pocket size with Air Velocity, Temperature and Windchill. The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging function of 5, 10, or 13 second intervals. Fold up ...

By FLIR Commercial Systems Inc - Extech Instruments based in Nashua, NEW HAMPSHIRE (USA). from Air Flow Meters Product line

TSI’s VELOCICALC® Rotating Vane Anemometers accurately measure air velocity and temperature, calculate flow rate, perform averaging, and determine minimum and maximum readings. Advanced models offer variable time constant, sampling and statistics functions and data logging capability.

By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Ventilation Test Instruments Product line

Testo 405 Thermo-Anemometer is an economical way to get highly accurate hot-wire velocity measurements (metric units m/s only). This mini-anemometer also measures air temperature and enables entry of duct cross-sectional areas for volumetric flow rates (metric units only). Ships complete with meter, duct holder, belt clip, and ...

By MeterMall USA based in Marysville, OHIO (USA). from Air Flow / Anemometers - Hot Wire Anemometers Product line

The AN500 is a Hot Wire CFM/CMM Thermo-Anemometer. This Thermo-Anemometer comes with Automatic Temperature Compensation and a Telescoping Probe. New sensor technology delivers major improvements in durability and ATC (Automatic Temperature Compensation) for accurate in-duct Air Velocity measurements with changing air temperatures. Its telescoping ...

By FLIR Commercial Systems Inc - Extech Instruments based in Nashua, NEW HAMPSHIRE (USA). from Air Flow Meters Product line