Only show results available in Connecticut? Ok

aquifer injection equipment

  • SiREM - Model KB-1 Primer - Anaerobic Injection Water Preparation Anaerobic Bioaugmentation Cultures

    KB-1 Primer is used to prepare anaerobic water to disperse electron donors and protect anaerobic bioaugmentation cultures during injection into aquifers. In the past, production of anaerobic water was time consuming, and often produced water with solids that required filtration and that had pH impacts. SiREM ...

    By SiREM based in Guelph, ONTARIO (CANADA).

  • Penney - Groundwater Aeration For Removing Volatile Organic Compounds

    Groundwater aeration, air sparging, or in-place air stripping is a proven remedial technology for removing volatile organic compounds from groundwater. Ambient air is usually forced into the upper portion of a shallow groundwater aquifer through an injection well or sparger. A regenerative blower, a ...

    By Penney Engineering, Inc. based in Mansfield, MASSACHUSETTS (USA).

  • HRC PRIMER - Hydrogen Release Compound

    HRC PRIMER is a less viscous version of the standard Hydrogen Release Compound (HRC) product. It is a thinner, water-like compound that is typically injected into an aquifer where it releases lactic acid at a rate faster than standard HRC (several weeks), but at a slower, more controlled rate than dispersing ...

    By Regenesis based in San Clemente, CALIFORNIA (USA). from Enhanced Anaerobic Bioremediation Product line

  • PeroxyChem - In Situ Geochemical Stabilization (ISGS) Technology

    In Situ Geochemical Stabilization (ISGS™) technology utilizes a permanganate-based solution to geochemically stabilize dense non-aqueous phase liquids (DNAPL) in the aquifer. Permanganate and other proprietary reagents are mixed into an aqueous solution that can be injected into an aquifer either ...

    By PeroxyChem an Evonik Company based in Philadelphia, PENNSYLVANIA (USA). from Soil & Groundwater Remediation Product line

  • Metals Remediation Compound (MRC)

    a thick, viscous liquid. Upon injection into an aquifer, the organosulfur compound (the active metals immobilization agent) is released in a controlled manner when the ester bonds in MRC are cleaved via hydrolysis and microbial enzymatic action. Similar processes also cause MRC to release lactic acid which provides a ...

    By Regenesis based in San Clemente, CALIFORNIA (USA). from Metal Immobilization Product line

  • Model MUTUP - Specialised Pump

    The ClydeUnion Pumps MUTUP is an advanced pump designed to provide reliability in subsea multiphase pumping. It is also applied for downhole pumping applications onshore. It features a hydraulic turbine submersible pump, which is particularly suited for use in wells, where other artificial lift technologies are unsuitable due to high liquid ...

    By ClydeUnion Pumps - an SPX Corporation brand based in Glasgow, UNITED KINGDOM. from Specialised Pumps Product line

  • IRZ - Supplements

    Supplements (electron acceptors and nutrients) are injected into the contaminated groundwater using an array of injection wells. Advection and dispersion in the aquifer enhanced spreading of the supplements building reactive zones with enhanced biodegradation activity of indigenous microorganisms (in situ ...

    By In-Situ Technieken / Arcadis Nederland BV based in APELDOORN, NETHERLANDS. from Remediation Techniques Product line

  • Model CUP-HSP - Specialised Pump

    The ClydeUnion Pumps HSP is an advanced pump designed to provide reliability in downhole pumping applications. It features a hydraulic turbine submersible pump, which is particularly suited for use in wells, where other artificial lift technologies are unsuitable due to high liquid viscosity or high G.O.R. at pump ...

    By ClydeUnion Pumps - an SPX Corporation brand based in Glasgow, UNITED KINGDOM. from Specialised Pumps Product line

  • Sparging

    Sparging signifies the injection of air into the groundwater of the aquifer. The air migrates in fine fissures to the vadose zone. The air injection leads to a stripping of contaminants into the vadose zone and boosts aerobic biodegradation in the groundwater. Contaminated vapour is extracted and treated. ...

    By In-Situ Technieken / Arcadis Nederland BV based in APELDOORN, NETHERLANDS. from Remediation Techniques Product line

  • QRS - Quick Release Substrate

    injection will typically enhance biological activity for 2 ...

    By Terra Systems, Inc. (TSI) based in Claymont, DELAWARE (USA). from Bioremediation Solvents Product line

  • MTS - Metals Treatment Substrate

    MTS™ - Metals Treatment Substrate is a slow release product that has been designed to remove a range of dissolved metals from groundwater via in situ immobilization and also provide a substrate for biodegradation of chlorinated compounds. It contains sulfate and sulfide. This complex is immobile in the subsurface because it sorbs strongly to the soil. MTS™ can also be used as a ...

    By Terra Systems, Inc. (TSI) based in Claymont, DELAWARE (USA). from Bioremediation Solvents Product line

  • Biopipe - Biological Wastewater Treatment Pipe System

    Biopipe guarantees a wastewater treatment system good for life Unlike other traditional wastewater systems Biopipe produce NO SLUDGE, NO ODOUR, NO SOUND AND NO WASTE. Biopipe brings energy consumption to a minimum as it can store wastewater in a horizontal position which better distributes water pressure and require less energy as compared to other systems which can only use vertical ...

    By Biopipe Global Corp. based in NEW JERSEY (USA).

  • Cadillac - Model EMAG - Magnetic Flow Meter

    The Cadillac EMAG Magnetic Flow Meter has been acknowledged as the industry standard for accuracy and electronics innovation. The Cadillac EMAG magnetic flow meter is capable of measuring liquids of all types and consistency while providing an obstruction free flow path. While the EMAG has a traditional flow tube/coil design the EMAG shares the same electronics platform as the CMAG. This provides ...

    By Central Station Steam Company- Cadillac Meter based in Tigard, OREGON (USA). from Magnetic Meters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you