atmospheric emission Equipment in USA

Premium

Forrec - Hospital Waste Recycling Plants

. This eliminates the need for an incinerator and avoids emissions into the atmosphere, resulting in a significant benefit to the environment. The output material can be used as RDF (refuse-derived ...

By Forrec srl Office in Tampa, FLORIDA (USA). from Installations Plants Product line

Premium

Dürr Megtec - Carbon Adsorption Systems

Carbon adsorption systems from Dürr Megtec are used in a wide range of industrial applications. Both regenerative and non-regenerative systems are used to capture vapor-phase emissions of volatile organic compound (VOC) solvents from industrial processes and prevent their emission to the ...

By Dürr Systems, Inc. Office in Vero Beach, FLORIDA (USA).

Premium

Particulate Matter

Includes dust, dirt, soot, smoke and liquid droplets directly emitted into the air by sources such as factories, power plants, cars, construction activity, fires and natural windblown dust. Particles formed in the atmosphere by condensation or the transformation of emitted gases such as SO2 and VOCs are ...

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA). from Pollutants Product line

Koger - Model Type A - B - Industrial Cyclone Separators

paired with final filter or in closed-loop systems as atmospheric emissions are eliminated, Bolted construction enables inlet position to be interchanged from clockwise to counterclockwise rotation, Hot rolled plate construction is cleaned, primed and painted with selection of standard paint colors, Flat top ...

By Koger Air Corporation based in Martinsville, VIRGINIA (USA). from Cyclones, Airlocks, Fans Product line

Shand & Jurs - Model 94140 - Spring Loaded Pressure Relief Vent (Spring Closed)

The Shand & Jurs Model 94140 Spring Loaded Pressure Relief Vent reduces excessive venting of product in liquid storage tanks. Available for open or closed vent systems, this vent provides pressure relief by either venting vapor into the atmosphere or piping emissions in a closed loop ...

By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Conservation Vents – Pressure Vents Product line

Gas Washing

To solve the problems of particulate emissions to the atmosphere, we offer the system ecoWash. The development of the ecoWash system was carried out specifically for driers via direct drying trommels or other processes with powder emissions. It comprises a wet scrubber system incorporated into the gas output ...

By Prodesa Medioambiente Office in Alpharetta, GEORGIA (US) (USA). from Gas Treatment Product line

Direct Drum Dryer

a gas treatment system is required to separate the product from the gas stream and avoid particle emission to the atmosphere, as well as ...

By Prodesa Medioambiente Office in Alpharetta, GEORGIA (US) (USA). from Thermal Drying Product line

Continuous Emissions Monitoring System (CEMS)

Loccioni Environment provides complete systems for monitoring continuous industrial emissions in the atmosphere (CEMS): Interfacing with the bodies dealing with law limits control, it affords turnkey solutions, fixed or transportable CEMS, complete with data acquisition and processing software, for plants of any ...

By Loccioni Group Office in College Park, MARYLAND (USA). from Environmental Process Monitoring Systems Product line

Model TD1200 - Dust Collector

Specification – TD1200. Model: TD1200..Capacity: 1200cfm. Total Emission to Atmosphere: <10mg/mâ³>. Filters: Pleated Spun Bonded Polyester Needlefelt. Expected Filter Life: In excess of 4 Years (under normal operating conditions).Filter Cleaning: Reverse Jet Pulse (Venturi Assisted). ...

By Mineral Stats Inc based in Lakewood, COLORADO (USA). from Sample Preparation Product line

Harmony - Insite Technology for Outdoor Compactors

Insite technology can also be added to any make and model of Outdoor Compactors. This system provides you with valuable asset information that will increase your bottom line, such as: Fullness of containers – partial full and full, cycle count, motor run time, communication time-outs, AMP draw, contact hauler for pull of full ...

By Harmony Enterprises, Inc. based in Harmony, MINNESOTA (USA). from Insite Technology Product line

Model BV10000 - Butterfly Valves

The Batley BV10000 is a control valve that is suitable for many process applications. The BV10000 valve is available with Varidiff Trim, if cavitation is a problem. The standard range of Butterfly Valves has been designed to give cost effective flow control of liquids and gases where a complete tight shut-off is not essential. The ‘swing-through’ vane, which has no contact with the ...

By Weir Power & Industrial PLC- Trillium Flow Technologies Office in Fresno, CALIFORNIA (USA). from Control & Choke Valves Product line

Ecomembrane - Lagoon Cover

The covers are tailor-made on existing or new lagoons to minimize gaseous pollutant emissions and to avoid evaporation and diffusion into the atmosphere caused by the wind. The cover is assembled by union of parallel stripes of material with continuous high frequency welded joints. The central area of the cover ...

By Ecomembrane Srl Office in North Little Rock, ARKANSAS (USA). from Air Product line

Williams - Secondary Shredders

Williams offers a complete line of one-way and reversible shredders with optional Controlled Airflow Downward/Controlled Air Management (CAD/CAM). Secondary shredders have been designed to meet the specific requirements of fuel preparations. Proven rugged design, minimized maintenance costs, absolute control of particle size for combustion efficiency and optimized power consumption are achieved ...

By Williams Patent Crusher & Pulverizer Co., Inc. based in St. Louis, MISSOURI (USA). from Shredders Product line

Kenway - Fiberglass Tank Cover Systems

Kenway Composites designs FRP cover systems by custom engineering, fabricating, and installing fiberglass tank covers for a variety of industrial and commercial applications. We can design fiberglass tank covers suitable for any loading requirements. These requirements range from necessary climate loading such as snow and wind to seismic requirements. We can design covers to include non-slip ...

By Kenway Corporation based in Augusta, MAINE (USA).

Rotary Machines Systems

incharged of emission purification in ...

By Fives I.T.A.S. s.p.a. Office in Cleveland, OHIO (USA). from Combustion Product line

Shand & Jurs - Model 94050 - Polyvinyl Chloride Conservation Vent (Pressure/Vacuum)

on atmospheric storage tanks requiring normal ...

By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Conservation Vents - Pressure and Vacuum Vents Product line

Model 5400 and 8400 Series - Pneumatic Pumps

The 54/84 was developed for continuous, accurate injection in harsh offshore and remote locations. It’s for serious, mission-critical chemicals like methanol, drag reducer, and other expensive, hazardous, and corrosive production chemicals. From the materials of construction, to the isolated chemical head, to the switching valve, everything has been built to optimize chemical injection ...

By CheckPoint Pumps & Systems based in Mandeville, LOUISIANA (USA). from Pneumatic Pumps Product line

NO2 from Passive Filters

Nitrogen Dioxide (NO2) Emissions. Diesel engines emit oxides of nitrogen (NOx), consisting of nitrogen oxide (NO) and nitrogen dioxide (NO2). The percentage of each does vary, but typically NO2 might make up 10% of the total NOx coming out of the engine. Reports have linked continuously regenerating filter ...

By Johnson Matthey Emission Control Technologies Distributor in Englewood, COLORADO (USA). from Technologies Product line

Model RenAM 500M - Metal Additive Manufacturing System

The RenAM 500M is a laser powder bed fusion additive manufacturing system designed specifically for the production of metal components on the factory floor. It features automated powder and waste handling systems that enable consistent process quality, reduce operator touch times and ensure high standards of system safety. The system build volume is 250 mm × 250 mm × 350 mm. The RenAM ...

By Renishaw plc Office in Hoffman Estates, ILLINOIS (USA). from Metal Additive Manufacturing (3D Printing) Systems Product line

Filtered Hoods

Because all laboratories are concerned by risk prevention, Erlab and its 40 years of experience as a world leader in the field of molecular filtration has concentrated all its expertise and introduces a new generation of non ducted mobile filtration fume enclosures named captair Flex.Based on a new modular design, the CaptairFlex range ensures optimal operator protection by being able to adapt ...

By Gray and Green Laboratory Systems LLC based in Pearland, TEXAS (USA).