Only show results in Michigan? Ok

auger drill equipment

  • Premium

    AMS - Augers

    AMS augers come in both ‘manual’ and ‘powered’ versions. Manual augers are connected to an extension and cross handle and are turned into the ground by hand. A One-Piece Open-Face Auger is also available for installing 3' bait stations. Powered augers (also known as Flighted Augers) are connected to a gas drill and are ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Pest Control Product line

  • Premium

    AMS - Heavy-Duty Gas Vapor Probe Kits

    Add Torque to your Gas Vapor Probe system!.The heavy-duty gas vapor probe kits have all of the components included in the regular GVP kits, but with the added benefit of flighted augers which allow you to penetrate rocky and hard soil conditions. The kit comes with enough flighted extensions to pre-bore a hole to a depth of 9 feet! The heavy duty ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Soil Gas Samplers Product line

  • Premium

    AMS - Flighted Auger Kits

    The AMS 2' flighted auger kit is equipped to drill access holes up to 9' deep. The included 1 1/2' x 6' soil core sampler may then be used to collect soil samples in liners. Additional extensions may be added to obtain deeper depths. Kit Includes Bosch 11245, 5/8' threaded male to SDS Max adapter, 1 1/2' x 6' soil core sampler, slide ...

  • Premium

    AMS - Model 9410-VTR - Mid-sized PowerProbe

    The PowerProbe 9400 Series is our mid-sized PowerProbe. The track-mounted 9410 VTR is compact for limited access areas being 56 inches wide, but maintains great augering (3,000 ft-lb) and direct push drilling (200 ft-lb) power. Fully loaded with all options (winch, SPT Hammer, Direct Push Hammer, and Auger Motor), it has a surface load of only 5.6 ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerProbe - 9400 Series Power Probes Product line

  • Premium

    Model 04.15.SB - Hard Soils 7m Liner Sampler Stand Set

    With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Sediment Samplers Product line

  • Premium

    AMS - Rocky Soil Screw Augers

    AMS Rocky Soil Screw Augers, with their heavy-duty design and extra large pilot tips, can easily drill through hard, rocky soils. The AMS Rocky Soil Screw Augers are heavy duty soil augers designed for use with rotary hammer drills. They are made from heat treated high carbon steel and have oversized tungsten carbide-surfaced bits. These soil ...

  • Premium

    Eijkelkamp - Model 02.01.01 - Aluminium Tripod, Cap 6.5 kN (650 kgf)

    A tripod is an essential part of a bailer boring set (cable tool drilling equipment). Also drillings at greater depths, or the application of heavier augering or soil core sample equipment require the use of a tripod. In selecting a tripod, working height, weight, and maximum load capacity (= tensile force) are usually determinant factors. ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Augering & Soil Sampling Equipment Product line

  • Model D115 - D200 - Auger Drillings Systems

    Auger Drillings Systems D115 - D200 with rotary head. Auger Drilling Systems are mainly  used in fissures, scaly, smooth and weathered rocks or other similiar cohesive grounds. Different tools are available to manage all types of soil conditions. The discharge of the boring material can be improved by flushing if acceptable.

    By SysBohr GmbH based in Fulda, GERMANY. from Drilling Technique Product line

  • Hydraulic Auger Drills

    Hydraulic Auger drills are used for pre-drilling prior to pile placement, removing soil plugs from driving piles, installation of tiebacks, and auger-cast piles. Our Auger drill features heavy-duty hydraulic components with fixed or variable torque capabilities. You can attach using excavator of 25~35ton.

    By Hydraulic Attachments International, Inc. based in Raleigh, NORTH CAROLINA (USA).

  • Geomash - Multipurpose drilling rigs LBU-50

    Drilling rigs of the LBU-50 series with mechanical drive of a mobile rotator are intended for drilling of wells of different function at engineering-geological research with possibility of soil sampling, construction works and for construction of wells of electrochemical protection. LBU-50 drilling rigs provide core, auger drilling, drilling with ...

    By Geomash based in RUSSIA.

  • Three Source - Drilling Pipe

    Specification: dia 60mm*45m, dia42mm*1.5m, dia60mm*1.5m dia: 70mm*1.5m, dia60*4*1500(release explosive when lifting), dia100*60*3*1500(release explosive no lifting), dia48*3*1500(release explosive no lifting). Auger drilling pipe: dia50*90*1500mm.

    By Zhuozhou Three Source Drilling Rig Manufacturing Company based in Zhuozhou City, CHINA. from Drill Pipe Product line

  • MARL - Model M 4CT - Auger Drills

    The M 4CT auger drill is an excellent choice when you need powerful drilling capabilities for shallow to intermediate boreholes on rough or uneven terrain. Mounted on the Canycom S25A, the M 4CT's  compact size, powerful drill and tracked carrier make it highly maneuverable, easy to operate, and efficient. Perfect for a variety of ...

    By MARL Technologies Inc. based in Edmonton, ALBERTA (CANADA). from Auger Drills Product line

  • Marl - Model M 10T - Tracked Auger Drill

    Drilling excellence and operator comfort on tracks to take you anywhere.The MARL M 10T gives you all the power and performance of our renowned M 10 drill on a tracked carrier. This drill delivers excellent results in even the most difficult ground conditions, while also offering the best in operator safety and comfort. The tracked carriage is ...

    By MARL Technologies Inc. based in Edmonton, ALBERTA (CANADA). from Auger Drills Product line

  • Model RB 10 T - Rotary Drilling Rig

    The new rotary drilling rig for drilling depths to 150 m. The smallest universal rotary drilling rig of PRAKLA Bohrtechnik. The PRAKLA RB 10T universal drilling rig enables each user to drill with the following methods: Rotary-drilling with direct circulation. Rotary-drilling with reverse circulation. Auger drilling. Percussion cor drilling (ram ...

    By PRAKLA Bohrtechnik GmbH - BAUER Group based in Peine, GERMANY. from Drilling Rigs Product line

  • Model CME-75 - Track Mounted

    This 22 tonne monster mounted on a Nodwell 110 is appropriately nicknamed the “Canyonero”. This rig features wireline, an auto hammer, a 250 gallon watertank, and rotary and auger drilling capabilities.

    By Aardvark Drilling Inc. based in Guelph, ONTARIO (CANADA).

  • Soilmec - Model SF-50 - Drilling Rig

    The SF-50 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique. The upper structure of the SF-50 is mounted on Soilmec base carrier and has been designed to perform:

    By Soilmec S.p.A based in Cesena (Forlì Cesena), ITALY. from Piling Rigs - SF Series Product line

  • Big Beaver - Portable Auger Drill

    The Beaver works on the same principle as a truck mounted drill rig. However, with its modular format and compact size, it can get into places you could only imagine. The mast can be wheeled around the site on its16-inch tires in a lowered position (36-inches high by 26-inches wide) and tips upright to drill (80-inches high). With its 450-pound ...

    By Rocky Mountain Soil Sampling Inc. based in Bowen Is., BRITISH COLUMBIA (CANADA).

  • Dando - Model Geotec 6 - Rotary Drill Rig

    The Dando Geotec 6 is a robust, hydraulic rotary top drive geotechnical site investigation rig capable of a full range of sampling and testing techniques including SPT. Available with high speed and high torque rotary head options for auger drilling and/or coring.

    By Sonic Drill Corporation based in Bellingham, WASHINGTON (USA). from Drill Rigs- Dando Product line

  • Soilmec - Model SF-65 - Drilling Rig

    The SF-65 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique. The upper structure of the SF-65 is mounted on Soilmec base carrier and has been designed to perform: - CFA (Continuous Flight Auger) piles by means of long auger string. The SF-65 is equipped with the DRILLING MATE ...

    By Soilmec S.p.A based in Cesena (Forlì Cesena), ITALY. from Piling Rigs - SF Series Product line

  • Beiyi - Model BY-AD150 - Auger Drilling Machine

    Hydraulic earth drill is mainly composed with power head and auger. The power head and auger are fixed together. Auger is composed of screw blade and bit on the end of the auger, there is also teeth on the end of the auger. Simple construction, stronger drill ability, low production cost, high flexibility

    By Wuxi BeiYi Excavator Parts Factory based in Huishan District, Wuxi,, CHINA. from Hydraulic Earth Drill Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you