Only show results in Massachusetts? Ok

autoclave manufacturer equipment

  • Premium

    GE ReadyCircuit - Single-use Sensor Assemblies

    Single-use tubing assemblies integrated with sensors for temperature, pressure and conductivity and compatible with SciLog BioProcessing Systems SciTemp™, SciPres™, and SciCon™ monitors (part numbers 080-790, 080-690, and 080-590, respectively).

  • Eralp - Autoclaves

    Because of high frequency of start stop cycle, autoclave manufacturing needs more experience and controls than other pressure parts.

    By Eralp Makina Kazan Kimya Ltd. Sti. based in Mustafakemalpaşa, TURKEY. from Autoclave Product line

  • Premium

    GE Whatman - Model Polycap AS - Nylon Membrane Filter and Glass Microfiber (GMF) Prefilter

    GE’s Whatman Polycap AS (Aqueous Solution) combines a nylon membrane filter and glass microfiber (GMF) prefilter for a long lifetime device that can filter large volumes of even difficult, particulate-laden samples.

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Laboratory Filtration - Filtration of Volumes Greater Than 500 MI Product line

  • Pneumatic-Opening Autoclave

    Type: FGZFQkettle diameter:1.65~2.68mDesigned pressure: 1.1~1.6MpaDesigned temperature: 187~204┬░CProduct Category : Pressure VesselsCombined years of experience in autoclave manufacturing and advanced foreign technologies, ZG engineers design a new type autoclave, which utilizes the pneumatic to make the autoclave cover swing up and ...

    By Zhengzhou Boiler Co., Ltd. (ZBG) based in Zhengzhou, CHINA.

  • Nordic - Autoclave for Lab Testing

    Precise De-greased & Pre located outer MS sheet chamber duly powder coated & painted. Better mineral / glasswool Insulation keeps the surface Temperature normal & avoid heat / steam loss. Unique design of Radial locking for minimum steam loss, assure accurate steam generation / sterilization. suppliers of vertical autoclave, vertical autoclave ...

  • SupaPore - Model TPG - Screw Thread Autoclave And Tank Vent Filters

    SupaPore TP vent filters are specifically designed for venting applications on tanks and vessels and to be used as vacuum break filters for autoclaves. They are manufactured using a naturally hydrophobic PTFE membrane to ensure high flow rates and low pressure drops are achieved under a wide range of conditions. All cartridges are thermally bonded ...

    By Amazon Filters Ltd based in Camberley, UNITED KINGDOM. from Filter Cartridges And Capsules - Membrane Filters Product line

  • Rubber Curing Autoclaves

    Over the years the Rhodes Autoclaves have designed and manufactured autoclave systems for the rubber curing industry including rubber rollers, tyre re treading, and industrial drum lining. In recent years we have worked alongside a specialist rubber roller company, Rollertech Ltd, allowing our partnership to offer a broad range of autoclave ...

    By Autoclaves Ltd based in Keighley, UNITED KINGDOM.

  • Model T500 - Sample Tubes With Internal Threads

    High quality screw cap sample tubes manufactured of translucent autoclavable polypropylene. Tube with internal threads. Caps are supplied with or without a silicone washer, to ensure a positive leakproof seal at all temperatures. A 11/4 turn of the cap is sufficient to seal the vial. Since both closures and tubes are manufactured of the same ...

    By Simport Scientific, Inc based in Beloeil, QUEBEC (CANADA). from Tubes, Caps and Vials Product line

  • Autoclave Bags

    Like our Autoclave Cart Liners, our high strength polypropylene autoclave bags are manufactured for steam sterilization of infectious and biohazard waste. They are designed to withstand the high temperatures achieved during sterilization and are strong, pliable, leak and puncture-resistant. The temperature indicator strip is easily identified and ...

    By Pacific Medical Specialties, LLC based in Rancho Cucamonga, CALIFORNIA (USA).

  • Investment Casting

    Specifically developed for the removal of ceramic cores within aerofoils and turbines, our core leaching range of autoclaves have be designed and manufactured to give optimum cycle times, whilst at the same time ensuring operator safety. The continuous use of caustic solution in process has led our development engineers to carefully select and ...

    By Autoclaves Ltd based in Keighley, UNITED KINGDOM.

  • ZG Boiler - Autoclave for AAC Plant

    Autoclaved aerated concrete, shorted as AAC, is a highly thermally insulated concrete-based material used for both internal and external construction. AAC has excellent thermal insulating qualities and is also easily installed. Another benefit is that it can be routed, sanded, and cut to size on-site using standard carbon steel tools.It is a ...

    By Zhengzhou Boiler Co., Ltd. based in Zhengzhou, CHINA. from All Autoclave Equipment Product line

  • Pacific - Autoclave Cart Liners

    Like our Autoclave Bags, our high strength polypropylene Autoclave Cart Liners are manufactured for steam sterilization of infectious and biohazard waste. They are designed to withstand the high temperatures achieved during sterilization and are strong, pliable, leak and puncture-resistant. The temperature indicator strip on the printed liners is ...

    By Pacific Medical Specialties, LLC based in Rancho Cucamonga, CALIFORNIA (USA).

  • Motorsport Autoclaves

    Rhodes Autoclaves take pride in our products, every automotive autoclave we supply is designed and manufactured to meet the demands of our customers. Through product development and testing we deliver a fully engineered and proven solution, capable of operating in the most demanding manufacturing environment, where efficiency and product quality ...

    By Autoclaves Ltd based in Keighley, UNITED KINGDOM.

  • Bochem - Lab Jack with Metal Knob

    Regarding the operating load, we distinguish between maximum dynamic operating load (kg max dyn) and maximum static operating load (kg max stat) of the lab jack. These standards are also in line with DIN 12897.

    By Bochem Instrumente GmbH based in Weilburg, GERMANY. from Lab Jacks Product line

  • Autoclave Process System

    Equipment for the sterilization of infectious medical waste. An autoclave is a medical equip device that allows sterilization using steam at high pressure and temperature. The autoclaves are widely used by manufacturers of sterile medical devices and hospital sterilization plants, as a basic measure of sterilization products.

  • Environmental Autoclaves

    Rhodes Autoclaves now offer a bespoke range of environmental, waste processing and MSW autoclaves specifically designed for the sterilization of domestic household waste. Working in close partnership with automation specialists, Joseph Rhodes Ltd, we are able to offer a wide range of system options to meet specific user requirements. Autoclave ...

    By Autoclaves Ltd based in Keighley, UNITED KINGDOM.

  • Duran - Model GL 45 - Laboratory Glass Bottles

    DURAN original GL 45 Laboratory Bottles are available complete with high temperature screw caps and pouring rings. The PBT cap and ETFE pouring rings offer greater thermal and chemical resistance than the equivalent polypropylene components.

  • Horizontal Autoclave

    Shell length 22,0 m. Diameter 2,0 m. Working pressure 8,0 bar.Delivered for vulcanization of rollers for paper manufacture unit.

    By Dinworks OY based in Helsinki, FINLAND. from Autoclaves Product line

  • Composite Structures

    Flexible and Responsive Manufacturing: The Thermal Structures composite team uses a variety of manufacturing techniques to produce composite components with superior quality at competitive prices. From low volume spares to high volume production, Thermal Structures has the capabilities and experience necessary to service your composite needs.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Model 69 Series - Large Sterilizer Medical Autoclaves

    The Horizontal 69 Autoclave Series of autoclaves is designed to accommodate chamber volumes ranging in size from 510 to 1010 liters and for the proccesing needs of various load configurations.  The autoclave sterilizers are designed and manufactured in a state-of-the-art facility in compliance with strict international standards to ensure ...

    By Tuttnauer Europe B.V. based in Breda, NETHERLANDS. from Hospital CSSD Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you