AWWA Valve Equipment Available In Connecticut
-
Manufactured by VSI Waterworksbased in USA
The VSI Waterworks’ BFI Butterfly Valve is an AWWA butterfly valve, designed to be an economical flow control solution for line sizes of 2” through 30”. ...
-
Manufactured by DeZURIK, Inc.based in USA
DeZURIK AWWA Butterfly Valves meet the requirements of AWWA C504 and C516 standards. They are used for shutoff on clean water and gases. Offset disc design, corrosion resistant shaft, stainless steel disc edge, and self-compensating shaft seals are features on all DeZURIK AWWA valves. ...
-
Manufactured by GA Industries, LLCbased in USA
, Class 250B has 17-4PH shaft per AWWA C504. Standard traveling nut, worm gear or 10-position lever manual actuator. Optional electric motor or pneumatic or hydraulic cylinder ...
-
Manufactured by Kennedy Valve Plant and Industrial Groupbased in USA
ennedy Swing Check Valves are designed and manufactured in conformance with A.W.W.A. C508 and are for use on water, oil and gas lines. Under certain circumstances where it is desirable to have more positive control of the closing of the disc, the valves can be supplied with either lever-and-spring or ...
-
Manufactured by GA Industries, LLCbased in USA
Epoxy lined and coated ductile iron body with NPT connections - superior strength. Ductile iron plug with molded and vulcanized Buna-N coating - maximum durability. Permanently lubricated stainless steel upper and lower bearings - no iron-to-iron contact. Grit excluders - maximizes bearing life. Lever operator with memory ...
-
Manufactured by Alpine Flow Control Co.based in CHINA
Disc is designed with an abrasion nylon guide that enable a smooth operation, use much less torgue force during open/close operation. Forged stem provide stonger stem operation and less moving parts. Precision and high-tech rubber overmold process on disc ensure strong adhesive and resilient with easy smooth ...
-
Manufactured by V-Tork Controlsbased in INDIA
Water & Waste Water Treatment Plants, Paper, Mining, Power, Hydro Dams (Higher Size), Water Sludge, Treated Water, Service raw water, Sewerage, Thickened ...
-
Manufactured by V-Tork Controlsbased in INDIA
Liquid/Slurry Application: Abrasive Slurries in Mineral Industries, Pulp Slurry, Chemical Slurry, Molasses, Raw Water Intake, Ash Slurries in Thermal Power Plant, Chemical Slurries in Chemical Process Industries, Sugar Juice in Sugar ...
-
Manufactured by GA Industries, LLCbased in USA
enclosed stainless steel air cushion chamber minimizes the noise associated with the valve’s rapid closure. The Figure 350 meets the standardized face-to-face length of AWWA C508-01. It is suitable for water, wastewater and raw sewage in horizontal or vertical ...
-
Manufactured by J&S Valve, Incbased in USA
J&S Valve - Series 6900 - AWWA C509 - Resilient Seated Gate Valve, Ductile Iron, NRS, Mechanical Joint by Mechanical Joint End Connections, with 2" Operating Nut. J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate ...
-
Manufactured by J&S Valve, Incbased in USA
J&S Valve - Series 6900 - AWWA C509 - Resilient Seated Gate Valve, Ductile Iron, NRS, Mechanical Joint by Mechanical Joint End Connections, with 2" Operating Nut. J&S Valves Improve the Industry Standard for AWWA Gate Valves by providing a Heavy Thick Wall All Ductile Iron Gate ...
-
based in CHINA
AWWA C509 MJ/MJ, MJ/FL Mechanical. Mechanical Joint Gate Valve. Design: AWWA C509/515. Class: 200/250PSI. MJ ends to AWWA C153/A21.53. Testing: AWWA C509/515. Size: 2" - ...
-
Manufactured by GA Industries, LLCbased in USA
The Model 7700 Pump Director is the latest version of the time-proven GA Industries Pump Director, first introduce in 1975. The Pump Director is a pre-wired control panel to stop and start pumps and properly sequence the operation of the pump motor and the companion GA CHECKtronic®, Electric Check, or AWWA Ball Valve. The latest ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The ABAW AWWA C504 & C517 worm gear operators are suitable for manual actuation of AWWA C504 butterfly valves and C517 plug valves. They are designed to meet or exceed all aspects of AWWA C504 & C517 specifications and are manufactured from high quality and reliable materials. Overload and life tests ...
-
Manufactured by Hakohav Valvesbased in ISRAEL
Hav AWWA Resilient Seated Gate Valve Rising Stem 2" Operation Electric actuator External Coating Epoxy Internal Coating Enamel 250 PSI Face to face acc. EN 558-1/ ISO 5752 Series 3 (ANSI ...
-
Manufactured by Hakohav Valvesbased in ISRAEL
Hak AWWA Resilient Seated Gate Valve Non Rising Stem 2.5" Operation Handwheel External Coating Epoxy Internal Coating Enamel 250 PSI Face to face acc. EN 558-1/ ISO 5752 Series 3 (ANSI ...
-
Manufactured by Weflo Valve company Ltd.based in CHINA
AWWA C504, Butterfly Valve, Size 3"-24", 150PSI/250PSI FIG. 2102(2103). Working Pressure :150PSI for ANSI B16.1 Class125 flange. 250PSI for ANSI B16.1 Class250 flange. MJ x MJ end valve pressure can be both 150PSI and 250PSI. Working Temperatre :-10℃ to 120℃ for EPDM liner. -10℃ to 82℃ for NBR liner . -10℃ to ...
-
Manufactured by Process Development & Control LLC (PDC)based in USA
Our AWWA C504 butterfly valves have a long service life due to the medium not coming into contact with the bearing, and due to the wear resistant, corrosion and infiltration proof, seat with weld overlay. Suitable for water distribution, water treatment, pretreated wastewater, dams, power plants, industry, and pressure management. ...
-
Manufactured by Ross Valve Mfg Co., Inc.based in USA
The AWWA C507 ball valve shall be Metal to Metal Ball Valve (Model MSBV) as manufactured by Ross Valve Manufacturing Co., Inc. It shall be a full-ported valve (Pressure Class 150 -175 psi maximum differential pressure (cast iron) or Pressure Class 250/300 - 350 psi maximum differential pressure (ductile iron)) ...
-
Manufactured by Val-Matic Valve & Manufacturing Corpbased in USA
The Ener G AWWA Resilient Seated Ball Valve is the preferred selection for surge control and energy savings. Val-Matic's Ener G Ball Valve when fully open provides 100% flow area equal to the pipe size and will represent a significant savings in pumping costs compared to other pump control ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you