bearing monitoring Equipment | Environmental XPRT

OnTrak SmartLube - Remote Bearing Monitoring

The OnTrak SmartLube is a remote bearing monitoring and lubrication system designed to reduce what causes over 80% of premature bearings failure by enabling remote condition-based lubrication. When it comes to bearings, friction is the enemy. We go to great lengths to try to avoid unnecessary friction in our ...

By UE Systems Inc based in Elmsford, NEW YORK (USA).

Bearing Temperature Monitoring

In this application, five RTDs are being switched by the PD118 Minimux to a PD750 temperature meter with two relays. Currently, the Minimux is switching Stator #2 RTD and it is being displayed (105.0°C) on the PD750. The Minimux is also indicating that Bearing #2 is in alarm and this has resulted in an internal ...

By Precision Digital Corporation based in Hopkinton, MASSACHUSETTS (USA).

CMR - Model MP12 - Bearing Temperature Monitoring Sensor

The MP12 bearing temperature monitoring sensor is designed for industrial diesel and gas engines. This sensor constantly monitors the main bearing, providing a clear warning in case of bearing seizure. The tip of the sensor is typically positioned onto the back of the bearing shell or might be ...

By CMR Group based in Leetsdale, PENNSYLVANIA (USA). from Industrial Engine Sensors Product line

4B Braime - Model T400N Elite - Bearing Temperature Monitoring System

Unique low cost alarm/indicator panel for use with any 4B NTC-type temperature sensors. ADB810, WDB70, and WDB810 series sensors are recommended. The T400N ELITE is able to accept signals from up to 8 NTC sensors (zones), which are separated into two groups of 4 zones. Each group of sensors is able to cause alarm and shutdown of individual machine when hazardous conditions are detected. There ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Hazard Monitors Product line

4B Braime - Model T400 Elite - Bearing Temperature Monitor (PTC Version)

Low cost alarm/indicator controller for use with PTC temperature sensors. The T400 ELITE is a microprocessor controlled unit which works in conjunction with PTC temperature sensors to monitor up to 48 bearings and can cause alarm and shutdown of the machine when alarm conditions are detected. The control ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Hazard Monitors Product line

Model MDA - Bearing LifeGuard

Bearing LIFEGUARD is a metrics based system that allows the user to monitor and optimize key factors of the machinery under user control. Compatible with laptop and tablet computers, this condition monitoring instrument can be easily carried to the site for gathering information quickly and conveniently. It ...

By iAdept Marketing based in New Delhi, INDIA. from Bearing Condition Monitoring Instruments Product line

ADB - Adjustable Depth Bearing Temperature Sensor Tester

The ADB Sensor Tester has been designed to test 4B adjustable depth bearing (ADB) style temperature sensors in the field. This hand held test unit features an integrated heating block specifically designed to have a 4B ADB sensor directly inserted. With integral controls and temperature display, the unit ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Bearing Temperature Sensors Product line

4B Braime - Model MDB Series - Bearing Sensors

The MDB series is a range of bearing sensors manufactured to screw directly into a bearing housing through the existing 1/4” BSPT threaded grease zerk (can be installed in 1/8” NPT grease zerk fitting with an adapter). Each sensor is fitted with a grease zerk to allow lubrication of the bearing ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Bearing Temperature Sensors Product line

4B Braime - Model ADB - Adjustable Depth Series Bearing Sensors

is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The ADB series have NTC or PT100 type thermistors which allow for continuous temperature monitoring. The sensor is supplied with a 3m attached cable and can be connected to a PLC or to a hazard monitoring ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Bearing Temperature Sensors Product line

4B Braime - Model ADBxxV3AI/D2, ADBxxV3AI/D3, ADBxxV3AI/D4, ADBxxV3A - Milli-Temp Series Bearing Temperature Sensor

The Milli-Temp series can be used on any application where bearing temperature monitoring is needed. The Milli-Temp is a loop powered analog sensor with a 4-20 mA linear output that is scaled across a temperature range for continuous temperature monitoring. The sensor has been designed to allow the depth of the ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Bearing Temperature Sensors Product line

4B Braime - Model WDB Series - Bearing Sensors

The WDB series bearing sensors are designed to screw directly into a bearing housing. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The WDB8 series have a 1/4” BSPT thread. The WDB2 series have a 1/8” NPT thread. Three ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Bearing Temperature Sensors Product line

4B Braime - Model WDB7 - Lug Style Bearing Surface Temperature Sensor

The WDB7 series is a lug style NTC thermistor or platinum RTD (PT100) type for continuous temperature monitoring. It is designed to bolt directly onto a bearing housing, motor, gearbox, or machine casing. The mounting hole is M8 which can be drilled out up to M10 diameter. The sensor can be connected to a ...

By 4B Group based in Morton, ILLINOIS (USA). from Electronic Monitoring Equipment - Bearing Temperature Sensors Product line

Premium

Polychem - Solid Idler Collector Sprocket

Solid idler sprockets slide onto stub shafts for quick and easy installation and are held in place with retainer plates. The integrally molded chain-saver rim decreases chain and sprocket ...

By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Water & Wastewater - Polychem - Components - Sprockets Product line

Premium

New Cosmos - Model SDM-73 - Oil Steel Dust Meter

The SDM-73 enables simple diagnosis and trend monitoring of the wear condition of bearings, gears, cylinders, etc. by checking steel dust concentration in lubricating oil. Enables simple diagnosis and trend monitoring of the wear condition of bearings, gears, cylinders, etc. by checking steel dust ...

By DOD Technologies Inc based in Cary, ILLINOIS (USA). from Gas Detectors Product line

Premium

F&J - Model H9400 and H9400E - High Volume Air Sampler

The H9400 (100VAC) and the H9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage electric motor driven vacuum blower. The unit is equipped with a cable mounted on-off switch. The H9400/H9400E Air Samplers are equipped with a 102 mm diameter standard filter holder. These units utilize a heavy-duty polypropylene plastic ...

By F&J Specialty Products, Inc. based in Ocala, FLORIDA (USA). from Air Samplers - High Volume Air Samplers - Analog High Volume Product Lines Product line

Premium

F&J - Model T9400 and T9400E - Thermally Protected High Volume Air Sampler

The T9400 (100VAC) and the T9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage, thermally protected electric motor driven vacuum blower. The unit is equipped with a mounted on-off switch. The T9400/T9400E Air Samplers are equipped with a 4” (102 mm) standard filter holder. Each unit utilizes a heavy-duty polypropylene plastic ...

By F&J Specialty Products, Inc. based in Ocala, FLORIDA (USA). from Air Samplers - High Volume Air Samplers - Analog High Volume Product Lines Product line

10-Bar Fine Grinder

a tight distribution of particle sizes. Other options with these mills include complete bearing monitoring systems that not only measure bearing temperatures and vibration but also high frequencies that allow for early warning and rapid response of premature bearing failure. Both bearings on these mills are ...

By Prater Industries based in Bolingbrook, ILLINOIS (USA). from Fine Grinders Product line

Proximity Probes

CHB 3011 / CHB 3013 Proximity Probes - or displacement transduceres - are used to monitor the movement, i.e. the vibration of a machine. The probes are suitable for a variety of different applications like shaft location of sleeve bearing machines, monitoring of thrust bearing wear, vibration measurements, ...

By PCH Engineering A/S based in Hoersholm, DENMARK. from Other Products Product line

MACHTEC - Model LW3551257 - MACHTEC VFD LW 3551257 Decanter centrifuge

operation; Cycloidal gear , planetary gear and hydraulic differential for three different option ,which owned full range differential regulation suiting for different torque of solids transmission; Muti-safety protection : motor overload protection, bearing temperature monitoring ,torque protection of screw ...

By Machtec (Tianjin) Petroleum Equipment Co.,Ltd based in Tianjin, CHINA. from MACHTEC LW355*1257 DECANTER CENTRIFUGE Product line

200-18331 Vane Torque Gauge

The 200-18331 Vane Torque Gauge checks vane bearing torque of Wind Monitor family of sensors. Slip the fixture over the main housing and make simple yet accurate vane torque measurements. Charts relating vane torque to vane threshold provide limits for acceptable bearing ...

By NovaLynx Corporation based in Grass Valley, CALIFORNIA (USA).