Bearing Temperature Sensor Equipment Available In Canada
-
Manufactured by Thermometrics Corporationbased in USA
Our 90° Bearing Sensor is ideal for flush mounting and relives stress on wires from bending around the bearing with often times leads to a damaged ...
-
Manufactured by 4B Groupbased in USA
The ADB Sensor Tester has been designed to test 4B adjustable depth bearing (ADB) style temperature sensors in the field. This hand held test unit features an integrated heating block specifically designed to have a 4B ADB sensor directly inserted. With integral controls and temperature ...
-
Manufactured by 4B Groupbased in USA
The Milli-Temp series can be used on any application where bearing temperature monitoring is needed. The Milli-Temp is a loop powered analog sensor with a 4-20 mA linear output that is scaled across a temperature range for continuous temperature monitoring. The sensor has been designed to allow ...
-
Manufactured by 4B Groupbased in USA
The WDB7 series is a lug style NTC thermistor or platinum RTD (PT100) type for continuous temperature monitoring. It is designed to bolt directly onto a bearing housing, motor, gearbox, or machine casing. The mounting hole is M8 which can be drilled out up to M10 diameter. The sensor can be connected to a PLC or to a hazard monitoring ...
-
Manufactured by 4B Groupbased in USA
The MDB series is a range of bearing sensors manufactured to screw directly into a bearing housing through the existing 1/4” BSPT threaded grease zerk (can be installed in 1/8” NPT grease zerk fitting with an adapter). Each sensor is fitted with a grease zerk to allow lubrication of the bearing ...
-
Manufactured by 4B Groupbased in USA
The WDB series bearing sensors are designed to screw directly into a bearing housing. Each sensor is fitted with a grease zerk to allow lubrication of the bearing without the need for removal of the sensor. The WDB8 series have a 1/4” BSPT thread. The WDB2 series have a 1/8” NPT ...
-
Manufactured by 4B Groupbased in USA
lubrication of the bearing without the need for removal of the sensor. The ADB series have NTC or PT100 type thermistors which allow for continuous temperature monitoring. The sensor is supplied with a 3m attached cable and can be connected to a PLC or to a hazard monitoring system, such as 4B’s Watchdog Super Elite, T500 ...
-
Manufactured by Thermometrics Corporationbased in USA
Continuous Wire Feedthrough for Embedded Bearing Temperature Sensors while sealing securely to prevent oil wicking along the leads. Thermometrics bearing sensor oil seal fitting efficiently seals directly on the individual Teflon insulated leads of an embedded bearing temperature ...
-
Manufactured by 4B Groupbased in USA
Hazardmon is a secure hazard monitoring solution, which provides status notifications and data logging for bucket elevators and conveyors. It works with 4B's IE-Node, Watchdog Super Elite and T500 Elite hazard monitors, taking various inputs including belt speed, belt alignment and bearing temperature sensors. All of this together ...
-
Manufactured by Thermocouple Technology, LLC (TTEC)based in USA
Series 1000 Spring Loaded Tecpak Thermocouples. Spring Loaded, MgO insulated, metal sheathed. Rugged & Vibration Resistant Design. Styles available for use with Thermowells & for Bearing Temperatures. Firm sensor tip contact ensures optimum thermal response & high reliability. Stranded, ANSI color coded, Teflon Leads ...
-
Manufactured by Muller Beltexbased in NETHERLANDS
The Adjustable PT100 Bearing Temperature sensors with grease nipple, type PT100V3C has the feature that is adjustable in terms of the probe depth approach. The meeting will be conducted in this way not superficial, but on bearing ring itself. In practice, differences of about 20% to 40% to act against surface ...
-
Manufactured by Thermo Electric Instrumentation BVbased in NETHERLANDS
We have been supplying a full range of Gas Turbine temperature sensors for over 40 years. Temperature sensing equipment is used in a number of places within a turbine engine. From the exhaust temperature, burner temperature, oil temperature, to the bearing (Pill type) ...
-
Manufactured by VMI International ABbased in SWEDEN
Starter of condition based maintenance by trending measurement in PC ...
-
Manufactured by Sukhras Machines Pvt Ltdbased in INDIA
Surface Finish: Mirror or Matt Finish can be provided with Grit 220 & Above on Contact & Non-Contact areas. Drive: A.C. Inverter Drive shall be provided to vary the basket speed with built-in dynamic braking. Cleaning-ln-Place (CLP.) Arrangement: Provided in the centrifuge machine to clean the internals of the centrifuge. CIP nozzles are placed at a different location to spray the wash ...
-
Manufactured by 4B Groupbased in USA
The Watchdog™ Elite is a microprocessor controlled unit with combined belt speed, belt alignment, bearing temperature, pulley alignment and plugged condition monitoring for bucket elevators and conveyors. An LCD screen displays machine status messages (available in four different languages) and a super-bright LED display shows belt ...
-
Manufactured by Sukhras Machines Pvt Ltdbased in INDIA
Surface Finish: Mirror or Matt Finish can be provided with Grit 220 & Above on Contact & Non-Contact areas. Drive: A.C. Inverter Drive shall be provided to vary the basket speed with built-in dynamic braking. Cleaning-ln-Place (CLP.) Arrangement: Provided in the centrifuge machine to clean the internals of the centrifuge. CIP nozzles are placed at a different location to spray the wash ...
-
Manufactured by Hiller Separation and Processbased in USA
Hiller Separation & Process is a company motivated by customer expectations to design and produce machines featuring the highest level of sophistication and quality gained from several decades of decanter centrifuge manufacturing and application field experience. The newest machine from Hiller is the Model DP484 Decanter Centrifuge, which reflects our ongoing commitment to mechanical ...
-
Manufactured by Kensho China Limitedbased in CHINA
Engine Autostart and Stop on multiple triggers via float switches, Pressure, Vacuum, Level Sensor, SAT/GSM modems, PLCs and RTUs. Bi-directional remote telemetry connection to a PLC and SCADA networks and to a website via Satellite or GSM modem. Bright graphical display showing all engine/equipment data and warning/faults. Complete ...
-
Manufactured by Kensho China Limitedbased in CHINA
The K27 engine auto-start controller is designed for the off-road stationary diesel engine market. The software is application driven. The controller’s primary function is the management of your diesel engine and the equipment it is driving. The software and hardware is designed to lower the cost of running and owning your asset. It will reduce your fuel and maintenance costs but most of ...
-
Manufactured by Hermann Träxler GmbHbased in GERMANY
TMA draft tube mixers have the task to mix the sludge in digesters of sewage treatment plants in order to achieve a perfect yield of digester gas. During this process, the content of the digester tank is homogenised. It avoids large differences in temperature and composition. Träxler technology is suitable for all types of digester ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you