Only show results available in Connecticut? Ok

bentonite grout equipment

  • Model TD-16 - Coated Granular Bentonite Grouting Material

    TD-16 is a one-step coated granular bentonite grouting material designed to achieve low permeability seals in water wells, geotechnical borings, and heat pump applications. TD-16 achieves a range of solids contents, 16% to 20% solids by weight. TD-16’s granular nature reduces dusty conditions during mixing operations and slurry loss to the ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Drilling - Grouting Product line

  • ENVIROPLUG - Tablets and Coated Tablets

    ENVIROPLUG TABLETS are manufactured for use in piezometer holes, monitor wells and other sealing & plugging applications. ENVIROPLUG TABLETS are available in 1/2”, 3/8”, and 1/4” sizes. ENVIROPLUG TABLETS swell in water to more than 10 times their original volume. COATED ENVIROPLUG TABLETS allow for deeper, more predictable ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Water and Minerals Drilling Product line

  • Grounding Grout - Low-Resistance Grout for Utility & Telecommunication Grounding

    GROUNDING GROUT is a high-solids, single-component bentonite grout. GROUNDING GROUT is specially formulated to provide a conductive seal around grounding rods. When used to seal drilled boreholes in which vertical grounding rods are placed, GROUNDING GROUT increases the grounding system’s conductivity by lowering the resistivity from 300 ...

    By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Grouts & Sealants Product line

  • CETCO - High-Solids Granular Bentonite Grout

    CETCO GRANULAR GROUT mixes into a smooth bentonite grout that has no lumps and pumps easily. CETCO GRANULAR GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

    By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Grouts & Sealants Product line

  • Puregold - High-Solids Grout

    PUREGOLD GROUT is an easy mixing, organic-free, high-solids bentonite grout engineered to form a contaminant resistant seal without affecting groundwater chemistry. PUREGOLD GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

    By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Grouts & Sealants Product line

  • CETCO - High-Solids Powdered Bentonite Grout

    CETCO GROUT is a 20% solids, polymer-free, single-component, easy-to-use sodium bentonite grout available in powdered form. CETCO GROUT allows placement in a low viscosity state. CETCO GROUT is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

    By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Grouts & Sealants Product line

  • Model GROUT-WELL AND GROUT-WELL DF - Bentonite Grouting Material

    GROUT-WELL and GROUT-WELL DF are one step bentonite grouting materials designed to achieve low permeability seals in water wells, monitor wells, geotechnical borings, and heat pump holes. GROUT-WELL and GROUT-WELL DF achieve a range of solids contents, 17% to 20% solids by weight. GROUT-WELL DF’s granular nature reduces nuisance dust during ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Drilling - Grouting Product line

  • STRING - Fully Grouted Multi-Point Piezometer

    Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled. Multi-point Piezometer Strings allow for multiple Vibrating Wire Piezometers to be connected on a single ...

    By RST Instruments Ltd. based in Maple Ridge, BRITISH COLUMBIA (CANADA). from Piezometers Product line

  • Barotherm Gold - Thermally Conductive Grout

    BAROTHERM GOLD thermally conductive grout is a bentonite material designed for use in grouting boreholes containing ground source heat loops, and related applications. BAROTHERM GOLD thermally conductive grout when combined with silica sand at various concentrations yields a grout with thermal conductivity values ranging between 0.4 and 1.2 ...

    By Baroid Industrial Drilling Products based in Houston, TEXAS (USA). from Drilling Fluid Additives Product line

  • GeoPro - Thermal Grout Lite

    Thermal Grout Lite is GeoPro’s original thermal grout base specifically designed to optimize the performance of ground heat exchangers for the geothermal heating and cooling industry. A unique blend of bentonite, Thermal Grout Lite is designed for use with high quality silica sand to achieve thermal conductivities from 0.45 to 1.00 Btu/hr ft ...

    By GeoPro, Inc. based in Elkton, SOUTH DAKOTA (USA). from THERMAL GROUT Product line

  • GeoPro - Thermal Grout Select

    Thermal Grout Select is GeoPro’s premium thermal grout base specifically designed to optimize the performance of ground heat exchangers for the geothermal heating and cooling industry. A unique blend of bentonite, Thermal Grout Select is designed for use with high quality silica sand to achieve thermal conductivities from 0.45 to 1.20 Btu/hr ...

    By GeoPro, Inc. based in Elkton, SOUTH DAKOTA (USA). from THERMAL GROUT Product line

  • Model SPC50 and SPC90 - Grout Pumps

    Dimensions: L610mm - H420mm - W380mm. Weight: 34 kg. Ratio: 8,3/1 (SPC50) - 13/1 (SPC90). Max. pressure max.: 58 bar (SPC50) - 90 bar (SPC90). Max. debit approx.: +de 2m3/h(SPC50) - 1m3/h (SPC90). Theoretical volume per piston cycle: 178 cm3. Engine fluid: air, azote, etc. Compatible with: cement grout, mud, bentonite, etc.

    By Petrometalic SA based in Versailles Cedex, FRANCE. from Construction Pumps Product line

  • SRS GROUT - Grouting Media

    SRS GROUT is non-toxic, low permeability grouting media. SRS GROUT is a specially formulated bentonite product for use as a stabilizer and sealant for soils, fractured rock and other industrial geo-technical applications requiring non-destructible, non-combustible sub-grade seals.

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Industrial Applications Product line

  • HD-Engineering - Model GP160-100 - Grout Pumps

    The GP160-100 pump is suitable for grouting water, cement, bentonite and find grained material. The special features of the GP160 includes high output flow and pressure, user friendly adjustable output pressure and volume control as well as convenient maintenance. Its robust and compact design makes it to be handle by small crane truck and fork ...

    By HD Engineering based in Fanling, CHINA. from Pump and Grouting Product line

  • WAGS - Colloidal Grouting Systems

    The Wags Colloidal Grouting Systems series are heavy duty, high volume colloidal high sheer mixing grout plants for applications that require colloidal mixing like dams, tunnels, post-tensioning, underground mining and many heavy construction jobs. The Wags colloidal series easily mixes and pumps slurries of neat cement, fly ash, bentonite, ...

    By WAGS Grouting Systems based in Bibra Lake, AUSTRALIA.

  • WAGS - Geo-Grouter Series (Pneumatic)

    Use: The Wags Geogrouter series are heavy duty, high pressure grouting units for applications such as dams, tunnels, post-tensioning, underground mining and many heavy construction jobs. The Wags Geogrouter series easily mixes and pumps slurries of neat cement, fly ash, bentonite, microfine cements and post tensioning grouts.

    By WAGS Grouting Systems based in Bibra Lake, AUSTRALIA.

  • ENVIROPLUG - Model GROUT - Bentonite

    ENVIROPLUG GROUT is a patented formula bentonite product designed to be used as a water well grouting fluid, drill hole abandonment fluid, grout for geotechnical monitoring wells after casing placement, and other geotechnical construction applications requiring non-destructible sub-grade seals. Once in place, ENVIROPLUG GROUT begins to set and ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Drilling - Grouting Product line

  • ENVIROPLUG - Model MEDIUM & COARSE - Bentonite Chips

    ENVIROPLUG MEDIUM & COARSE were the FIRST bentonite chips developed and marketed. They are pure Wyoming Bentonite, designed for use as sealants for hole abandonment, casing seals or any vertical seal to prevent water movement up or down a bore hole. When absorbing water, ENVIROPLUG MEDIUM & COARSE swell to fill voids, exerting pressure ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Drilling - Grouting Product line

  • CETCO - Model MX-80 - 30-100 Mesh Bentonite

    CETCO MX-80 is a granular bentonite product composed of dried bentonite clay with a typical size range between 30 and 100 mesh.

    By CETCO based in Kings Norton, UNITED KINGDOM. from Drilling Products - Grouts & Sealants Product line

  • Model IZ Type - 28 - 170 MM - Double Packers

    Sometimes, it is evident that users fail to select an appropriate type of Packer with respect to given technical data at worksite use such as : working pressure in relation with borehole diameter. Cement is the most common type of grout used however other types are used such as bentonite, epoxy and other special agents used for waterproofing and ...

    By Star Packer Drilling Equipment based in Yenimahalle, TURKEY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you