Only show results available in Massachusetts? Ok

bilge monitor equipment

  • Premium

    TDHI - Model TD-107 - Oil Content Monitor

    The TD-107 Oil Content Monitor is the most reliable way to to measure oil content in a typical ship’s oily waste holding tank, bilge, or oily water separator.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Deckma OMD-21 - Oil Water Monitor - 15ppm Bilge Alarm

    The OMD-21 Bilge Alarm Monitor was designed by Deckma Hamburg GmbH for use in conjunction with 15 ppm Oily Water Separator Systems. The performance and specifications of the OMD-21 comply with the International Maritime Organization (IMO) requirements described in Resolution MEPC.60 (33).

    By Mackay Communications, Inc. based in Raleigh, NORTH CAROLINA (USA).

  • Model 15 ppm - Bilge Alarm Type BilgMon 488TM

    Petrik Naval has engineers to carry out the annual and 5th annual calibration, certification and verification, also troubleshooting and repair of Oily Water  Separator 15ppm Bilge Alarm Monitors. According to the new MEPC 107(49) compliant monitors, and the old MEPC 60(33) compliant monitors. Bilge Alarms for  the marine market, are ...

    By Petrik Naval based in PI Palmones, SPAIN.

  • DECKMA - Bilge Alarm

    DECKMA is a global leader in bilge effluent monitoring. DECKMA was one of the first manufacturers to receive IMO resolution MEPC.107(49) approval for their OMD-2005 Bilge Alarm. Today DECKMA supplies to Bilge Separator manufacturers the newer version OMD-24, and for retrofitting of existing installations the OMD-24 and 2008. All systems are ...

    By Hermont Marine Inc. & Hermont Tech based in St Laurent, QUEBEC (CANADA). from Pollution Abatement Product line

  • UC Marine - Model 15ppm - Oily Water Separator / Bilge Alarm Monitors

    15 ppm Bilge Alarm Monitor serves to continuously measure the concentration of oil in the bilge and other waste water produced on a ship, and produces an alarm signal when the oil concentration exceeds 15 ppm.

    By UC Marine (China) Co., Ltd based in Jinwan Disthct, Zhuhai City, CHINA. from Pollution-Prevention Equipment Product line

  • JOWA - Model SeaGuard - 15ppm Bilge Alarm

    The JOWA SEAGUARD 15ppm Bilge alarm is designed to monitor the effluent from a bilge water separator. The alarm is approved to IMO MEPC 107(49).

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Model OMD- 32 Series - Oil-in-Water Monitor

    The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-water separator units. The OMD-32 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the International ...

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

  • JOWA - Condensation Water Monitor

    The JOWA SEAGUARD 15ppm Bilge alarm is designed to monitor the effluent from a bilge water separator. The alarm is approved to IMO MEPC 107(49).

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Model TD-107 5.0 - 5 PPM Bilge Oil Content Monitor

    The TD-107 5.0 is the world's first and only DNV Clean Design Certified 5ppm Bilge Oil Content Monitor. The TD-107 5.0 is an extension of the highly successful TD-107 Oil Content Monitor for oily water separators, except with an added level of testing and certification for 5ppm applications by Det Norske Veritas' Clean Design program.

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oil Content Monitors Product line

  • Model MEPC 107 (49) - Smart Cell Bilge Alarm - Simultaneously Monitor

    IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel was laid on or after 1st January 2005. The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for the monitoring of ...

    By Rivertrace Engineering Ltd based in Redhill, UNITED KINGDOM. from Marine Applications Product line

  • Brace & Leg Leak Detection System

    Our Brace & Leg Leak, Void Detection System System offers a continuous automatic monitoring of a vessel’s watertight integrity. High level redundancy along with SIL approved sensors combine to ensure a highly effective and reliable system. Leak Detection Sensors can be easily retro fitted into Braces, Bilge Pots or Void Spaces to monitor ...

    By Monitor Systems Scotland Limited based in Aberdeen, UNITED KINGDOM.

  • Model TD-107 - 15 PPM Bilge Oil Content Monitor

    The TD-107 Fluorescence Oil Content Monitor (OCM) is a 15 ppm bilge alarm for oily water separators based on fluorescence detection technology. Fluorescence makes the TD-107 resistant to interferences by turbidity or particles and sediments in the bilge which impact competing 'light scatter' oil content monitors. Because silt, algae, iron oxide ...

    By NAG Marine based in Norfolk, VIRGINIA (USA). from Oil Content Monitors Product line

  • JOWA - Model DPS - Discharge Protection System

    JOWA Discharge Protection System, DPS, has the advantage to monitor and control the discharge of Bilge water to prevent any accidental oil discharge. All data is logged and stored for later printout or down load. This gives the operator full control over the discharge. The DPS is available as a add on option to the JOWA 3SEP 15ppm bilge water ...

    By JOWA based in Kållered, SWEDEN. from Monitoring and Control Systems Product line

  • Tank Cleaning

    Toxfree have a wealth of experience in the industrial tank cleaning arena. Our service offering incorporates high pressure cleaning of internal and external surfaces of tanks, vessels and ships bilges.Gas Free Certification and air quality monitoring is conducted in accordance with AS 2275 1-2 1979. Our team of experienced technicians are ...

    By Toxfree Solutions Ltd (Toxfree) based in AUSTRALIA.

  • Oil Content Monitor

    The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains high ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Marine Equipments Product line

  • JOWA - Model 3SEP OWS - Oily Water Separator

    The 3SEP OWS is a dual stage oily bilge water separation system utilizing differential specific gravity, coalescence plates and filtration to separate and remove free and emulsified oil. The unit is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP ...

    By JOWA based in Kållered, SWEDEN. from Equipment for treatment of oily water Product line

  • Advanced Sensors - Model SA-100/1000 - Side Stream Oil in Water Analyzer

    The SA-100/1000 is a side stream Oil in Water analyzer suitable for non-hazardous areas; it uses fluorescence to provide continuous accurate measurements of oil concentrations in water. Reliable real-time data enables operators to take accurate discharge measurements and to improve efficiency of separation processes enabling cost reductions. The ...

    By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM. from Ordinary Area Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you