Bilge Water Equipment In USA
-
Manufactured by Compass Water Solutions (CWS)based in USA
Three-stage coalescer-type system. Removes non-soluble oil, solids, and entrained air from an oily water solution. 20 gallons per minute (0.5 m3/h). Continuous and intermittent operation. Automatic control capability for discharging accumulated ...
-
Manufactured by Compass Water Solutions (CWS)based in USA
ULTRA-SEP G Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. G Series provide the same. Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger. ULTRA-SEP systems but in a more compact ...
-
Manufactured by Compass Water Solutions (CWS)based in USA
ULTRA-SEP is a two-stage system. The fi rst stage effi ciently removes free oil using our HELI-SEP coalescing matrix separator, which is familiar to ship operators worldwide, with more than 20,000 in service around the world. The second stage SPIR-O-LATOR technology provides a positive physical barrier to break emulsions and provide continuous less than 5ppm discharge. In fact, oil cannot ...
-
by Jowa ABbased in SWEDEN
Jowa Oily Water Separator is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP OWS is as small as possible. The 1m3/h model pictured has a footprint of only 950 x ...
-
Manufactured by Compass Water Solutions (CWS)based in USA
ULTRA-SEP C Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. C Series provide the same Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger . ULTRA-SEP systems but in a more compact ...
-
Manufactured by SkimOil, LLCbased in USA
This bilge water extraction system is a filtration vessel containing a patented high-absorption capacity media for oil and grease removal — effectively removing oil from bilge water to as low as 5 ppm — well below environmental and USCG required ...
-
Manufactured by SkimOil, LLCbased in USA
Skimoil’s BilgeVAP is a partial answer to the marine waste water management requirements presented by the new EPA enforcement of the Clean Water Act. The BilgeVAP by Skimoil evaporates away the water portion of oily bilge water, gray water and even treated black water ...
-
Manufactured by Pan America Environmental, Inc.based in USA
The BOWTS Series Bilge and Oily Wastewater Treatment Systems are designed to implement a wide variety of flexible chemical/physical treatment scenarios to fit shipping and naval treatment requirements for shore-side treatment installations. In the reduction of emulsions, solids, metals, oils and fuels chemistry is important and ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Material: Polypropylene caps and outer shell filled with oil-block absorption media. Removal of: free, dispersed and emulsified ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Fuel bladder tanks are ideal for temporary storage of gasoline, diesel, jet fuel, oils and other hydrocarbon based petroleum products. These collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Fuel bladder tanks are ideal for temporary storage of gasoline, diesel, jet fuel, oils and other hydrocarbon based petroleum products. These collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable ...
-
Manufactured by Pieralisi Groupbased in ITALY
Application: Bilge Water or equivalent. Sediments discharge type: Self cleaning. Material in contact with the product: AISI 304 / duplex. Cover material: AISI 304. Sediments discharge chamber material: cast ...
-
Manufactured by Pieralisi Groupbased in ITALY
Application: Bilge Water or equivalent. Sediments discharge type: Self cleaning. Material in contact with the product: AISI 304 / duplex. Cover material: AISI 304. Sediments discharge chamber material: Cast ...
-
Manufactured by Pieralisi Groupbased in ITALY
Application: Bilge Water or equivalent. Sediments discharge type: Manual. Material in contact with the product: AISI 304 / duplex. Cover material: AISI 304. Sediments discharge chamber material: Cast Iron. ...
-
Manufactured by Centek Industries Inc.based in USA
CENTEK Industries has developed the BilgeTek Dockside Bilge Pumpout System for use at marinas and boat service yards to remove and clean oil and fuel polluted bilge water from boats. The self contained BilgeTek system can be ordered as a portable, cart mounted system for easy maneu-I vering to contaminated vessels or It can be permanently ...
-
Manufactured by Centek Industries Inc.based in USA
and other hydrocarbons from the bilge water as it is discharged overboard, while the SmartPad is placed in the bilge sump area to capture the harmful contaminants where they ...
-
Manufactured by A&V Envirotech, a division of A&V, Inc.based in USA
Nutri-Bio5000 is a patented complex formulation designed to promote emulsification and natural biodegradation of oils found in ship bilge water. Microbes capable of degrading motor oils, diesel fuel, gasoline, and grease are commonly found in most bodies of fresh water and salt water. If sufficient quantities of oxygen and ...
-
Manufactured by SkimOil, LLCbased in USA
The Skimoil Overboard Oil Protection System (OOPS) is designed to simply and economically remove oil contamination from the bilge water of boats. The filtered bilge water is discharged without creating environmental damage. The Skimoil System is simply installed between the bilge pump and the overboard ...
-
by Jowa ABbased in SWEDEN
The unit separates up to 80% of the water in the emulsion. The treated water is then fed to an MEPC 107(49) approved bilge water separator. The residue is pumped to the concentrated sludge tank. The system is operating automatically, in a step-by-step program (PLC controlled). The working principle is ...
-
Manufactured by SkimOil, LLCbased in USA
Skimoil’s® Evaporation Systems are a partial answer to the marine waste water management requirements presented by the new EPA enforcement of the Clean Water Act. Skimoil’s® Evaporation Systems evaporate away the water portion of oily bilge water, gray water and even treated ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you