Only show results in Virginia? Ok

bioaerosol equipment

  • Rapid - Model E - Real-Time Airborne Particle Identifier

    Rapid-E is the world’s first instrument to accurately and comprehensively analyze single aerosol particles in real time. Fully automated, it characterizes any airborne particle in the range of 0.5-100 micrometers, matching and opening up numerous applications in environmental monitoring, and beyond. Rapid-E has a robust design that ensures ...

    By Plair SA based in Plans-les-Ouates, SWITZERLAND.

  • MicroBio - Model MB1 - Bioaerosol Sampler

    The MicroBio MB1 Bioaerosol Sampler is the most economical air sampler of its kind.  It has been fully validated and thousands of units have sold worldwide. Capable of using both 90 mm Petri dishes or 55 mm contact plates, readily available at low cost with a variety of media makes the MicroBio a very low cost instrument to use.

    By Cantium Scientific Limited based in Dartford, UNITED KINGDOM.

  • MicroBio - Model MB2 - Bioaerosol Sampler

    Bioaerosol samplers are vital equipment for us in bioaerosol research, clean rooms, pharmaceutical validation and throughout hospitals wherever air hygiene is vital. The MicroBio MB2 Bioaerosol Sampler has a host of features making it ideal for use in such applications. It has been fully validated and thousands of units are in use worldwide.

    By Cantium Scientific Limited based in Dartford, UNITED KINGDOM.

  • Buck BioAire - Model B520 - Bioaerosol Sampling Pump

    The BUCK BioAire Model B520 Bioaerosol Sampling Pump is a compact, lightweight 5-20 LPM controlled flow sampling pump for bioaerosol sampling with Allergenco-D and Air-O-Cell cassettes. The easy, fullcontrol keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy calibrations without tools, or perform ...

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Bioaerosol Sampling Pump Product line

  • Via-Cell - Model VIA010 - Bioaerosol Sampling Cassette

    The first disposable cassette impactor that brings simplicity and reliability to viable sampling combined with multiple analysis options. The Via-Cell bioaerosol sampling cassette is designed to collect both viable and non-viable bioaerosols, maintain viability of the viable mold spores and prevent growth during transport to the laboratory. ...

    By Zefon International, Inc. based in Ocala, FLORIDA (USA). from Bioaerosol Sampling Cassette Product line

  • Wideband Integrated Bioaerosol Sensor (WIBS)

    The WIBS provides highly sensitive measurements of mold and other bioaerosols. Its UV wavebands have been selected to optimize detection of common bioaerosols (tryptophan and NADH). An instrument that provides highly sensitive measurements of mold and other bioaerosols.

    By Droplet Measurement Technologies (DMT) based in Boulder, COLORADO (USA). from Wideband Integrated Bioaerosol Sensor (WIBS) Product line

  • Model E6 - Sampler Single-Stage Bioaerosol Impaction Sampler

    The single-stage bioaerosol impaction sampler is an aluminum device held together by three spring clamps and sealed with o-ring gaskets. The impactor stage contains 400 precision-drilled holes. When air is drawn through the sampler, multiple jets of air on the stage direct any airborne particles toward the surface of the agar collection surface. ...

    By Environmental Monitoring Systems, Inc.(ems) based in North Charleston, SOUTH CAROLINA (USA). from Sampler Single-Stage Bioaerosol Impaction Sampler Product line

  • A6 Single Stage Microbial Sampler

    The A6 is a single stage microbial bioaerosol impaction sampler designed to test for viable fungi and bacteria. Can be used for USP 797.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from A6 Single Stage Microbial Sampler Product line

  • Buck BioSlide

    The Buck BioSlide Sampling Pump is a compact, lightweight 10-20 LPM controlled flow sampling pump for bioaerosol sampling with greased slides.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA).

  • Cyclex-d Cassette

    The Cyclex-d is a disposable cassette offering effective bioaerosol sampling including fungal spores, pollen, fibers, dander, and other airborne contaminants. Sample at 20Lpm.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Cyclex-d Cassette Product line

  • Environics ENVI BioScout - Biological Detection & Identification System

    ENVI BioScout™ provides a robust and sensitive bioaerosol detection solution that continuously monitors and warns for the presence of harmful airborne biological particles and collects air samples for further BWA analysis at the time of a biological alarm. ENVI Bioscout bioaerosol detector is designed to operate as an integral part of fixed ...

    By Environics OY based in Mikkeli, FINLAND. from Biological Detection & Identification System Product line

  • Allergenco D Cassette

    The Allergenco-D sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particules and other airborne particulates.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Allergenco D Cassette Product line

  • Buck BioAire

    Compact and lightweight, this battery operated pump provides a 5-20 LPM flow rate for bioaerosol sampling and has the capability to run continuously for a full 5 hours on NiCad batteries.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA).

  • Allergenco - Model D IAQ - Air Sampling Monitoring Cassette 10/Box

    The Allergenco-D IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, enivironmental dusts, construction dusts, and other airborne particulates.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Air Sampling Monitoring Cassette 10/Box Product line

  • Button Aerosol Sampler

    The Button Sampler, with its porous curved-surface inlet, is designed to improve the collection characteristics of inhalable dust, including bioaerosols for viable or non-viable analysis. Use the Button Sampler for low-level personal or area sampling of inhalable dust.

    By SKC Inc. based in Eighty Four, PENNSYLVANIA (USA). from Button Aerosol Sampler Product line

  • Allergenco - Model D IAQ - Air Sampling Monitoring Cassette 10/Box

    The Allergenco-D IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, enivironmental dusts, construction dusts, and other airborne particulates.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Air Sampling Monitoring Cassette 10/Box Product line

  • Allergenco - Model D IAQ - Air Sampling Monitoring Cassette 10/Box

    The Allergenco-D IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, enivironmental dusts, construction dusts, and other airborne particulates.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Air Sampling Monitoring Cassette 10/Box Product line

  • BioLite Sonic - Model 30.5 L/min - Flow,Sample Pump

    The BioLite, up to 30.5 L/min or sonic flow, area sample pump provides indefinite run times using a 230-V AC adapter for sampling particulates and bioaerosols. The pump is ideal for use with the SKC BioSampler and asbestos cassettes. CE marked Not UL Listed for intrinsic safety

    By SKC Inc. based in Eighty Four, PENNSYLVANIA (USA). from Flow,Sample Pump Product line

  • LinEair - Model 40 LPM, 120 VAC - LPM Linear Piston Air Sampling Pump

    The Buck LinEair 40 Sample Pump is a 5-35 LPM linear piston air sampling pump with long life motor providing impressive power, compact size, and ultra-quiet operation and low current drain for a wide range of sampling applications. With the LinEair 40 , you can use filters, PUF samplers, sorbent tubes, charcoal cartridges, cascade impactors, ...

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from LPM Linear Piston Air Sampling Pump Product line

  • Bio Sampler

    The BioSampler® collects bioaerosols in liquid for sample times up to eight hours when used in connection with the sonic-flow Vac-U-Go Sampler. Use BioSampler for IAQ investigations, infection control in hospitals and veterinary clinics, biological research, infectious disease investigations in public buildings, and safety concerns in the food ...

    By SKC Inc. based in Eighty Four, PENNSYLVANIA (USA). from Bio Sampler Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you