biogas combustion Equipment

195 Results found
Only show results available in Virginia?
OK
  • Keyword: biogas combustion ×

ATTSU - Model S - Biogas - Horizontal Hot Water Boiler

by ATTSU TERMICA S.L.     based in Cerla, SPAIN

The boiler S is a horizontal hot water boiler, firetube, three pass boiler with reverse flame and smoke chamber completely cooled by the water in the boiler. This boiler is specially designed for use with biogas. With Thermal power 200-3500 kW and design temperature to 110 ° C. The construction of the S series boilers guarantees high output ...

HOFGAS - Model APM - Gas Treatment Plant for Recovery

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The HOFGAS- APM is a complete pump and flare station for the safe and economic treatment of gas from anaerobic fermentation. Apart from the plant components, a detailed regulation and operational concept is supplied for the specific adaptation to the particular process. In particular, the discharge pressure for recovery is regulated and the signal ...

HOFGAS - Model IFL2c - Standard Flare for Sewage or Biogas Plants

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

This biogas / WWTP gas flare with insulated combustion chamber and manually air combustion regulation is deployed when express regulations on gas emission must be observed. Controlled combustion of methane gas within high temperature flare.

HOFGAS - Model IFL1c - Standard Gas Flare for Gasholder Operation

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Standard biogas / WWTP gas flare for sewage or biogas plants. Ideal in combination with gasholder operation and gas systems with constant pressure ratios. Thanks to concealed combustion, the HOFGAS-IFL1c flare attains more than 99% combustion efficiency. Because of no visible flame, erection of the gas flare is most advantageous even near ...

HOFGAS - Model IFL4c - Customised Biogas Gas Flaring System

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Customised HOFGAS-IFL4c biogas gas flaring system is deployed when express regulations on gas emission must be observed. Because of no visible flame, erection of the gas flare is most advantageous even near residential areas. The system is simple to operate and adjust, and starts reliably. The high temperature flare for biogas comes with the ...

Hofstetter - Model Ready/Palma - Gas Treatment Plant for Methane Gas From Lagoons

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Hofstetter offers a reliable system for processing methane gas from palm oil extraction or other typical anaerobic digestion processes. The biogas is disposed of in an environmentally friendly manner or used to generate electricity.

AEREON CEB - Model 50 - Certified Ultra-Low Emissions Burner

by AEREON     based in Austin, TEXAS (USA)

The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee, smokeless ...

Shand & Jurs Biogas - Model 97301 - Waste Gas Flare

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The S&J 97301 Waste Gas Burner is specifically designed for dependable “Flaring” operation that utilizes low BTU anaerobic digester waste gases. The 97301 efficiently incinerates waste gases thus minimizing odors and VOC’s. Using a stoichiometric pilot ignition system, the 97301 is able to acheive a stable pilot flame. Air ...

Biogasmart - Model ST - Elevated Biogas Flare Stack

by Biogasmart     based in Gadesco Pieve Delmona, ITALY

The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion.

Biogasmart - Model HE-Type - High Efficiency Biogas Flare Stack

by Biogasmart     based in Gadesco Pieve Delmona, ITALY

HE-Type is an enclosed ground flare; combustion takes place within a cylindrical chamber lined with fiberceramic and this causes a higher destruction efficiency of the biogas in comparison to open flares. Enclosed combustion also makes flame and noise less perceptible and for this reason these flares are normally selected for installation in ...

BioGas - H2S Scrubber

by BioGas Products Ltd.     based in Brierley Hill, UNITED KINGDOM

Biogas Products Ltd has gained significant experience and expertise in the manufacture and installation of Biogas H2S Scrubbers and now promotes one of the largest ranges of scrubbers in the UK. Designed exactly to your specification, our team of expert engineers will calculate the most efficient system based on your gas flow, hydrogen sulphide ...

Biogas - Dehumidifier

by BioGas Products Ltd.     based in Brierley Hill, UNITED KINGDOM

Biogas Products Ltd can ensure you get the most out of your CHP engine by removing moisture from the biogas, using a biogas dehumidifier, before it enters the combustion process. We design and manufacture gas dehumidifiers at our West Midlands workshop and install them on anaerobic digester sites all over the UK.

Biogasmart - Model HTE Series - High Temperature / Emergency Flare Stack

by Biogasmart     based in Gadesco Pieve Delmona, ITALY

HE-T series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced.

Biogasmart - Model HTS - High Temperature Flare Stack

by Biogasmart     based in Gadesco Pieve Delmona, ITALY

HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment.

Agama Biogas-Pro

by WASP Systems     based in Nairobi, KENYA

The BiogasPro is a high-efficiency biogas digester designed by some of SA's leading biogas experts specifically for domestic- and institutional-scale installations.  BiogasPro is an underground plastic tank that produces a combustible gas and liquid fertilizer by digesting sewage, kitchen waste, wastewater and similar organic materials. The ...

Innovative CHP Technologies

by BIOENERGY 2020+ GmbH     based in Graz, AUSTRIA

The utilisation of new biomass fuels and the development of next generation combustion systems should provide the basis for more cost efficient heat as well as combined heat and power production from biomass in the future. However, the CHP technologies presently available on the market are restricted to the large (steam cycles for plants >2 ...

Siloxane Removal from Biogas Landfill and Biogas WWTP

by Energy & Waste S.l     based in Terrassa-Barcelona, SPAIN

The biogas generated in landfill and in waste water treatment plant (WWTP) is affected by the presence of compounds such as siloxanes, which can cause severe damage to CHP engines reducing their lifetime due to the abrasive effect that siloxanes can cause in internal parts. Siloxanes are the most common kind of gaseous silicon compounds found in ...

Model REC2 60 BIO - Biogas Power Machines

by Enerblu Cogeneration - Riello Elettronica Group     based in Lonigo (VI), ITALY

Net electrical base load power 63 kW. Total Heating capacity (water 70-80 °C in / 80-90 °C out) 93 kW. Fuel power 179 kw. Electrical efficiency 35 %. Thermal efficiency 52 %. Global efficiency 87 %. Biogas consumption 31,5 Sm3/h

Model REC2 100 BIO - DW - Biogas Power Machines

by Enerblu Cogeneration - Riello Elettronica Group     based in Lonigo (VI), ITALY

Net electrical base load power 100 kW. Total Heating capacity (water 70-80 °C in / 80-90 °C out) 168 kW. Fuel power 275,7 kw. Electrical efficiency 36,3 %. Thermal efficiency 60,9 %. Global efficiency 97,2 %. Total Heating capacity 168 kw. Biogas consumption 48,2 Sm3/h

Biolimp-MPdry/Wet - Biogas Desulfurization System - Hydrogen Sulphide Removal

by Energy & Waste S.l     based in Terrassa-Barcelona, SPAIN

The desulfurization of biogas is necessary to prevent corrosion and to avoid toxic concentrations for the people involved in the plant operation. When the biogas is burned, SO2/SO3 is emitted which even more poisonous than H2S. At the same time the SO2 lowers the dew point in the stack gas (smoke) with the possibility of forming sulphurous acid ...

Related Terms for biogas combustion

Need help finding the right suppliers?

Let the XPRTs do the work for you