borehole installation equipment

Speed measurement for solids: Usable in free fall and in pneumatics. Continuous speed measurement of solids (powder, granules, dust ) in metal pipes. Measurement directly in the conveying stream / entrained flow. Measurement is completely independent of material. Simple retrofitting using a welding socket.

By ENVEA based in Poissy, FRANCE. from SWR Engineering Messtechnik GmbH - Velocity Measurement Product line

Trenchless raceway for electrical and telecommunication cables. SceptaCon is one of the first PVC systems designed for the rigors of trenchless applications. It links seamlessly to existing PVC conduit infrastructure and allows utilities to standardize on PVC throughout their entire electrical system.

By IPEX, Inc. based in Verdun, QUEBEC (CANADA). from Electrical - PVC Raceway for Horizontal Directional Drilling Product line

Unique design The BAT MkIII Filter Tip is the key component which gives BAT GMS its unique features. The patented, leakproof quick-connect system makes possible the connection of the various BAT Probes to the BAT MkIII Filter Tip for multiple functions.

By BAT Geosystems AB based in Stenkullen, SWEDEN.

The measuring system to easily measure the mass flow of solids.

By ENVEA based in Poissy, FRANCE. from SWR engineering Messtechnik GmbH - Mass Flow Measurement Product line

The Güralp 3 range of compact three-component broadband seismometers are suitable for surface vault, subsurface vault, posthole and borehole installations. The instruments are thoroughly proven and have been in continuous production since 1987. The Güralp 3T is widely used on many National Seismic Networks, with over 3000 triaxial ...

By Guralp Systems Limited based in Aldermaston, UNITED KINGDOM. from Instruments Product line

Since a submersible pump is a high capacity pump it follows that the Borehole in which it is installed should have sufficient capacity so that it will not be pumped dry. The bore should be screened, straight and of sufficient capacity. Before installation the borehole should be pumped clean of sand or other foreign matter with a test pump.

By Aquawetts Enterprises based in Nairobi, KENYA.

LMP 305 19mm Submersible level transmitter for borehole and slimline level measurement. The LMP 305 is 19mm in diameter owing to the 17mm diameter silicon based isolated diaphragm pressure sensor installed internally. This enables pressure ranges from as low as 1mWG up to 250mWG. They have a calibrated 4-20mA output and run from a 12 to 36V dc ...

By Impress Sensors & Systems Ltd based in Kingsclere, UNITED KINGDOM. from Hydrostatic `Submersible` Level Transmitters Product line

Allows multiple VW piezometers to be simply and reliably installed in a single borehole. It can be connected to a tough urethane jacketed Kevlar® reinforced single cable which prevents vertical void channels. Used primarily where multi-zone monitoring is needed at single locations. No conductors are shared ensuring the independent ...

By Geosense Ltd based in Suffolk, UNITED KINGDOM. from Piezometers Product line

The S-100 MK3 (third generation) is a three-component velocity output seismic sensor. The design is based on the force-balance principle, thus using three simple geophone elements, the frequency bandwidth is extended from 90Hz, down to 0.1Hz. The default cable length between the sensor casing and the electronics box is approximately 20 meters ...

By Geobit Instruments based in Patras, GREECE. from Seismometers / Seismic Sensors Product line

Inclinometers are special grooved tubes, generally installed in a borehole, used in conjunction with inclinometer system to monitor horizontal soil movements. Flush-coupled inclinometer casing is a special ABS grooved tube, machined at the end to have a self-aligning junction. It is produced from high-quality virgin ABS plastic. During ...

By Sisgeo S.r.l. based in Masate (MI), ITALY. from Inclinometers and Tiltmeters Product line

As Water and Agricultural Engineers we have extensive experience in supplying and installing Boreholes and Pipelines for the supply of Water. Water Boreholes are not only useful for more remote locations where there is no nearby mains supply, but can potentially save significant sums of money compared with metered supplies.

By P J Hirons Ltd based in Worcestershire, UNITED KINGDOM.

This measuring system is used for monitoring landslides, dams, earth retaining works, excavations, unstable slopes, banks and, more generally, for measuring horizontal earth movements. Inclinometric measurement is obtained by inserting a probe with MEMS biaxial accelerom-eter into an inclinometer casing installed in a vertical borehole. This ...

By Earth System s.r.l. based in Pilastrello Parma, ITALY. from Inclinometer Product line

The Waterloo Emitter is a simple, low cost device designed for the bioremediation of contaminated groundwater. Sized to fit 2', 4' and 6' (50, 100 and 150 mm) wells and boreholes, can be installed in stacks vertically or horizontally to ensure full coverage of the contaminant plume. The controlled release of oxygen and various other ...

By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Multilevel Systems & Remediation Devices Product line

Nicholls Boreholes have designed and developed a hydraulic loop feeder (patent number 1108318.5) to assist us with the safe and controlled installation of 40mm borehole probes. With the following benefits over traditional hand pushing installation techniques.

By Nicholls Countryside Construction based in Kirdford, UNITED KINGDOM.

This measuring system is used for monitoring landslides, dams, earth retaining works, excavations, unstable slopes, banks and, more generally, for measuring horizontal earth movements. Inclinometric  measurement  is  obtained  by inserting a probe with high-precision servo-accelerometric sensors into an inclinometer casing ...

By Earth System s.r.l. based in Pilastrello Parma, ITALY. from Inclinometer Product line

This type of sensor has been designed for microseismic events recording during hydraulic fracturing reservoir experiments. The sensor body has been designed in order to house double geophone strings at each axis. The orientation follows the 3-axis principle. This sensor has an external diameter of 50mm allowing it to be installed into ...

By Geobit Instruments based in Patras, GREECE. from Seismometers / Seismic Sensors Product line

This range of triplex filters is for the removal of iron and manganese, and will also adjust the pH of the incoming water. This unit covers small houses to large houses. The aerator contact assembly ( optional if required ) is installed between the borehole pump / supply pump and accumulator on a pressurised system, to ensure a consistent ...

By Kleiber UK Ltd based in Wakefield, UNITED KINGDOM. from Kleiber Triplex Iron / Manganese Filters Product line

This range of triplex filters is for the removal of iron / manganese, and adjusts the pH of the incoming water. This range is suitable for large houses to farms. The aerator contact assembly is installed between the borehole pump / supply pump and accumulator on a pressurised system, to ensure a consistent flow through the aerator. This results in ...

By Kleiber UK Ltd based in Wakefield, UNITED KINGDOM. from Kleiber Triplex Iron / Manganese Filters Product line

Mc2's electrodes are custom made in diameters of up to twelve inches and are typically ten feet long. They are rated to withstand temperatures up to 200oC (392oF) at more than 50kW. Electrodes are fabricated from high temperature resistant materials and connected to the PDS. The use of three-phase power synchronization means the ET-DSP™ ...

By McMillan-McGee Corp. based in Calgary, ALBERTA (CANADA).

DAPE S6 Series is the solution for domestic appliances, hydropneumatic systems and agricultural irrigation as well. With powers up to 45kW it is ideal to pump water from boreholes, wells, reservoirs and water channels. Installation can be vertical or horizontal.

By DAPE New Energy based in Centro Empresarial de Braga, PORTUGAL. from Solar Pumps Product line