borehole tool equipment

Designed to be mounted within a vehicle the WNA winch can spool up to 1800m of wireline cable. The winch is fitted with slip rings, depth encoder and level wind gear to form a complete self-enclosed package. The winch controller displays the depth, speed and tension during data acquisition, providing immediate confirmation of any deployment ...

By Mount Sopris Instruments based in Denver, COLORADO (USA).

Acoustic Borehole scanner tools generates an image of the borehole wall by transmitting ultrasound pulses from a rotating sensor and recording the amplitude and travel time of the signals reflected at the interface between mud and formation (borehole wall).

By Advanced Logic Technology (ALT) based in redange sur attert, LUXEMBOURG. from Imaging Probes Product line

Used when the natural gamma log is required. This tools slim design permits logging in small diameter boreholes and through steel or PVC drill pipe of 2 inch inside diameter or larger The sensor is located near the bottom of the tool to permit data acquisition near the total depth of the borehole. This tool can also be used with a spacer and gamma ...

By Century Geophysical LLC based in Tulsa, OKLAHOMA (USA). from Multiparameter Probes Product line

The MX Winch is a logging hoist capable of positioning a geophysical probe or other tools in a borehole. The MX winch line is comprised of the 4MXA-1000, 4MXB-1000 and 4MXC-1000. The system is equipped with a slipring and connections through which surface instrumentation can communicate with the probe.

By Mount Sopris Instruments based in Denver, COLORADO (USA). from Geophysical Logging Winches Product line

Mount Sopris 4WNA and 4WFA Truck-Mounted Winches are rugged, field-tested logging hoists capable of positioning a geophysical probe or other tool in a borehole. They are designed to be mounted to a truck and can haul equipment loads up to 272 kg (600 lbs) at rates between 0 and 90 m/min (0 to 300 ft/min). These winches are optimal for boreholes ...

By Mount Sopris Instruments based in Denver, COLORADO (USA). from Geophysical Logging Winches Product line

The “Mini” winch is a logging hoist, capable of positioning a geophysical probe or other tools in a borehole. The system is equipped with slipring and connections through which surface instrumentation can communicate with the probe. A precision measuring wheel and rotary encoder are also included to allow the amount of cable played out ...

By Mount Sopris Instruments based in Denver, COLORADO (USA). from Geophysical Logging Winches Product line

DRIL-SOL is a premium liquid drilling detergent designed to perform a variety of functions in vertical and horizontal directional drilling operations. DRIL-SOL is a premium liquid drilling detergent designed to perform a variety of functions in vertical and horizontal directional drilling operations. It is blended to offer the best characteristics ...

By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Water and Minerals Drilling Product line

The Series 4239 In-Line Litho-Density Tool sub uses two focused density detectors to computer borehole compensated density real time while logging.  This tool also measures the amplitude of the returning gamma pulses using a photoelectric reader in order to determine lithology directly.  It can distinguish between sandstone, limestone, ...

By Century Geophysical LLC based in Tulsa, OKLAHOMA (USA). from Express Stack Probes Product line

The Gearhart Angle-Only MWD system is a positive-pulse retrievable MWD tool that provides the driller with accurate borehole inclination measurements on a dedicated surface display system pumped up after each connection. The surface system has automatic detection and decoding. The tool uses Geo-Shot sensor package for accuracy and ruggedness.

By Gearhart Companies based in Fort Worth, TEXAS (USA). from Measurement While Drilling Product line

Used when the natural gamma log and casing collar locator is required. This tools slim design permits logging in small diameter boreholes and through steel or PVC drill pipe of 2 inch inside diameter or larger. The natural gamma sensor is located near the bottom of the tool to permit data acquisition near the total depth of the borehole.

By Century Geophysical LLC based in Tulsa, OKLAHOMA (USA). from Multiparameter Probes Product line

22,900 foot pounds of rotary torque; 48,000 pounds of retract… and designed from the ground up to handle the power with ease. Heavy-duty design and construction mean years of dependable service. The CME-85 is heavy duty all the way; take a look at the components. The right angle drive… the rotary box… the frame… every ...

By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Truck Mounted Drills Product line

The QL40-ELOG digital probe measures 8, 16, 32 and 64 inch normal resistivity, single point resistance (SPR) and spontaneous potential (SP) simultaneously. Users can log resistivity profiles with different depths of investigation and gain information about permeability, porosity, water quality and geological formation properties.

By Mount Sopris Instruments based in Denver, COLORADO (USA). from Downhole Probes Product line

Monitoring of the borehole wall for structural & geotechnical analyses. Optical documentation of small-diameter drill holes, e.g. of anchor boreholes.

By DMT GmbH based in Essen, GERMANY. from Geotechnical Measuring Systems Product line

Mount Sopris Matrix loggers are lightweight, portable digital geophysical loggers capable of all standard measurements on single conductor wireline.

By Mount Sopris Instruments based in Denver, COLORADO (USA).

The instrument is a new high precision, digital full space inclination measurement device. It is used for direction orientation and inclination measurement during engineering borehole, directional borehole, horizontal borehole, connection borehole, and other drilling hole in the non-magnetic area. It can provide depth, tool face angle, dip angle ...

By Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd based in Nanping, CHINA. from Geotechnical Inclinometer Product line

Hydraulic feed and retract system provides 19,600 lbs. [8,891 kg] of retract force and 13,650 lbs. [6,192 kg] of down pressure. The 68 inch [173 cm] stroke, hydraulic vertical drive system has no chains or cables which can stretch. It gives you precise control of force on the drilling tools.

By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Truck Mounted Drills Product line

Our rotary drilling tools are built for use with modern high-torque machines and to a robust and high specification for longevity of life.The rotary tools are constructed with a Kelly box to suite the individual rigs and are manufactured to the customers specification with cutting teeth or blades to optimise drilling in all types of ...

By STDS-Jantz GmbH based in Attendorn, GERMANY.

Our rotary drilling tools are built for use with modern high-torque machines and to a robust and high specification for longevity of life. The rotary tools are constructed with a Kelly box to suite the individual rigs and are manufactured to the customers specification with cutting teeth or blades to optimise drilling in all types of soils. ...

By N.U.B. Engineering Limited based in Motherwell, UNITED KINGDOM.

Truck, trailer, skid, ATV, tracked carrier, helicopter-portable. The CME-45C can be configured to fit your specific drilling applications.

By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Truck Mounted Drills Product line

Truck, trailer, skid, ATV, tracked carrier, helicopter-portable… The CME-45C can be configured to fit your specific drilling applications. Hydraulic feed and retract system provides 19,600 lbs. [8,891 kg] of retract force and 13,650 lbs. [6,192 kg] of down pressure. The 68 inch [173 cm] stroke, hydraulic vertical drive system has no chains ...

By Central Mine Equipment Company based in St. Louis, MISSOURI (USA). from Track Carrier Mounted Drills Product line