We couldn't find any boring holes equipment suppliers or service providers located in Newfoundland

Here is a list of equipment results with suppliers serving Newfoundland

Boring Holes equipment available in Newfoundland

  • Premium

    AquaLogger - Model 2000 - 2 Bore Holes for Remote Data Logging

    The AquaLogger-2000 is designed to fit down 2” bore holes for remote data logging. The unit features programmable event triggers to increase logging rate if rapid changes occur. The supplied LoggerLink software enables logger configuration (data file and memory management, setting measuring intervals and event trigger configuration). Data ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Sensors & Monitoring Product line

  • Premium

    AquaLogger - Model 7000- 18.59.50 - Down Bore Holes for Remote Data Logging

    The AquaLogger-7000 is designed to fit down bore holes for remote data logging. The AquaLogger-7000 is designed to be used outdoors and is rated to IP67, that is to say it is waterproof but it is not designed for submersion. The unit features programmable event triggers to increase logging rate if rapid changes occur. The supplied LoggerLink ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Sensors & Monitoring Product line

  • SSI - Model BHG - Bore Hole Gradiometer

    Durable Detector Locates large ferrous metal objects by being lowered into drilled boring holes. If you don’t want to miss the presence of any ferrous metal in the ground, you can rely on the Bore Hole Gradiometer (BHG). Featuring two sensors, it works similarly to a magnetic locator and can even be used in water, making it ideal for ...

    By SubSurface Instruments Inc. based in De Pere, WISCONSIN (USA). from Pipe and Cable Locator Product line

  • TRU-BORE - Highly Concentrated Bentonite

    TRU-BORE is a highly concentrated bentonite based drilling fluid designed for difficult drilling operations in both vertical and horizontal borings. TRU-BORE is extremely effective high performance viscosifier for horizontal drilling applications to maintain hole integrity during pullback. It is non-toxic and environmentally safe.

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Drilling- Water/Mineral Product line

  • FAF - Model 1250 PN16 - REDUCED BORE - Ball Valves

    FAF 1250, PN 16 reduced bore ball valve is operating by a ball having a hole with the same size as the flow section, through the help of the stem, rotating quarter turn(90 degree) between teflon seats where the ball to be parallel or perpendicular to the flow axis. Can be installed bidirectional. Through the stainless steel belleville spring ...

    By FAF Valve Company based in Ankara, TURKEY. from Ball Valves Product line

  • Delta - Model 14-651 - 1/2 HP Mortiser

    For precise, accurate mortising, nothing beats the DELTA Mortiser. Rigid cast iron construction and rack and pinion head ensure smooth consistent operation every time.Mortising head column can be turned 180° and remounted for off-table operation giving the machine virtually unlimited capacity.

    By DELTA Machinery based in Anderson, SOUTH CAROLINA (USA). from Drilling & Boring Machines Product line

  • Torquato - Model PDC - Hole Openers

    PDC hole openers are available in 1-piece designs in sizes up to 26”. Our replaceable blade PDC hole openers are available in sizes up to 30”. PDC hole openers drill faster and smoother than roller cone hole openers. PDC hole openers have longer service life than roller cone hole openers. PDC hole openers have no moving parts which can ...

    By Torquato Drilling Accessories, Inc. based in Old Forge, PENNSYLVANIA (USA).

  • Showcase

    Lifewater - Model LDT 360 - Water Well Drill Rig

    The LDT 360 water well drill rig has substantial cost advantages over other kinds of water well drill rigs for sale with comparable capability.  With the LDT 360 price advantage, as many as ten LDT 360 drill rigs cost about the same as only one typical rotary rig. This cost advantage enables entry by small business enterprises to ...

    By Lifewater Drilling Technology based in San Luis Obispo, CALIFORNIA (USA).

  • Deep-Hole Drilling Machines

    On six deep-hole drilling machines we can bore, core and drill out. The hole must be central in the workpiece.  The maximum piece weight is 10 to. Provided we have the tools available, we drill all internal diameters are between d=22.5 mm und d=670 mm.

    By Ruhfus Systemhydraulik GmbH based in Neuss, GERMANY.

  • Form Boring Tools

    Aside from the majority of components that require straight through bores, there are many components that require blind hole Form Toolsbores. These bores usually require some sort of form at the bottom of the bore. BTA Heller Inc. offers its engineering expertise to design and then manufacture form boring tools that are specifically designed for ...

    By BTA Heller Incorporated based in Troy, MICHIGAN (USA). from Other Products Product line

  • Raise Boring Tools and Systems

    Sandvik raise-boring heads optimize the performance of the boring machine by having high penetration rates, great stability, low vibration and low torque demands. Together with our high-performance pilot bits, they enable shafts and holes from 0.66 to 6.0 meters in diameter to be bored to depths (or lengths) of up to 1000 meters quickly, ...

    By Sandvik Mining based in Amsterdam, NETHERLANDS. from Mining Crushers Product line

  • Palmieri - Raise Boring Machines

    Raise Boring Heads & Machines for mining; The new Palmieri Raise Boring Machine range is currently consisting of two Raise Boring drilling units in different sizes and powers especially conceived for a wide range of applications in hard rocks, such as pilot holes drilling, reaming of existing pilot holes, blind boring for mines ventilation ...

    By Palmieri S.p.A. based in Gaggio Montano (BO), ITALY. from Mining Products Product line

  • Model BBM 110 - Boxhole Boring Machine (BBM)

    The BBM technology was developed by Herrenknecht for the rapid and safe construction of vertical and inclined raises or shafts, so-called slot holes. It can be used in stable rock formations and enables drilling diameters of up to 1.5 meters with a maximum drilling length of 60 meters.  In developing this technology, a particular focus was ...

    By Herrenknecht AG. based in Schwanau, GERMANY. from Mining Equipment Product line

  • Internal Profiling Boring Tool

    BTA Heller Inc. has developed a tooling concept for internal contour boring of components with pre-existing holes. This development was prompted by industries need for internal undercuts and internal contours that are generally too deep or too complicated for single point boring bars. Basically, the bottle boring tool is designed to ID contour ...

    By BTA Heller Incorporated based in Troy, MICHIGAN (USA). from Other Products Product line

  • Austin AI - Model DHP-1000 - Down Hole Probe

    Austin AI's DHP-1000 is a high performance down hole probe, based on Energy Dispersive X-ray Fluorescence (EDXRF) spectrometry for the determination of minor and major concentrations of elements in bore holes and other matrices. This instrument provides years of reliable, fast and accurate analysis. The system is ruggedly designed and engineered ...

    By Austin AI, Inc. based in Austin, TEXAS (USA). from Sorting & Separating Systems For Recycling Applications Product line

  • Model P, SV and SH - Cross Hole Device

    Cross-Hole survey consists in the direct measurements of horizontally travelling compression (P) and shear (S) seismic waves at test sites consisting primarily o soil materials. A borehole seismic source is used to generate a seismic wave train. One or more  receivers are used to detect the arrival of the seismic wave train in offse borings; ...

    By Solgeo srl based in Seriate (BG), ITALY. from Geophysical Research Product line

  • Hamar Laser - Model L-705/706 - Bore Laser Alignment System

    The L-705 Laser Borescope is unparalleled for ease of use and fast extruder alignments. It is also highly accurate, which can help to triple the life of extruder barrels and screws. With barrels costing up to $5,000 and screws even higher, the L-705 Laser Borescope alignment system can pay for itself very quickly. It can further save money by ...

    By Hamar Laser Instruments, Inc. based in Danbury, CONNECTICUT (USA). from On-Axis Straight Line Lasers Product line

  • Mahr Federal Air Plug and Air Ring Gages

    Mahr Federal Air Plug Gages and Air Ring Gages.  Nominal I.D. Size and Tolerance. Dimensionair Model to be used. Air Plug style (Through Hole, Blind Hole, or Counterbore. Air Plug finish (Chrome-plated or Hardened Steel. Option to order Master Setting Ring at same time.

  • Model FB-L PN 16-40, DN 15-100 - Full Bore Floating Ball Valve

    Full bore, split body, floating ball, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.

    By Bac Valves based in Figueres (Girona), SPAIN. from Ball Valves Product line

  • Model FB PN 10-16-25-40, DN 15-200 - Full Bore Floating Ball Valve

    Full bore, split body, floating ball, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.

    By Bac Valves based in Figueres (Girona), SPAIN. from Ball Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you