Bottom Sediment equipment | Environmental XPRT

Premium

AMS - Silt, Sand and Bottom Dredges

AMS offers a variety of dredges designed for sampling sand and silt as well as most types of non-cohesive material. AMS sampling dredges are placed onto the bottom sediment, then closed and pulled up to retrieve a sample. Careful release of the sample distributes the sample approximately as it appeared on the bottom – making sediment profile ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Sludge and Sediment Sampling Product line

Premium

Model 04.23.SA - Sediment Core Sampler Type Beeker

(Set A = basic set) can be used as an independent sampler. Like Multisampler / piston sampler but with lockable head and it is possible to hammer the sampler. 1.0 and 1.5 m long sampling tubes. Only suitable for assessing / pressing out samples on site. Operation almost as simple as Multisampler or piston sampler. Much cheaper than the old Beeker ...

By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Water(-Bottom) Sampling Equipment Product line

Premium

Ovivo - Traveling Bridge Clarifier

The Ovivo traveling bridge clarifier consists of a bridge that spans the width of a rectangular reservoir and travels from one end of the tank to the other. A set of rake blades and squeegees suspended from the bridge collect settled solids on the tank bottom and/or surface of the water and deposits them in a sludge pocket at one end of the tank.

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Clarification / Sedimentation Product line

Premium

Ovivo - Suction Pipe Clarifier

The Ovivo suction pipe clarifier is designed for municipal wastewater treatment applications. It features rapid sludge removal by suction, using 'organ' pipes instead of a suction duct as in the Ovivo suction header clarifier model. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier ...

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Clarification / Sedimentation Product line

Premium

OVIVO Enviroquip - Rapid Sludge Removal Clarifier

The Enviroquip rapid sludge removal clarifier is unlike any other clarifier. Sludge is drawn from the floor using straight tubes, going directly into SludgeViewr troughs, which display the amount of sludge return from each tube. Furthermore, Ovivo's ScumTrappR influent well captures 95% of the floatables, eliminating the need for scum to travel ...

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Clarification / Sedimentation Product line

Premium

OVIVO - Suction Header Clarifier

The Ovivo suction header clarifier is designed mainly for municipal wastewater treatment applications. It features rapid sludge removal by suction. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier model is well adapted for primary and secondary clarification process. It can be ...

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Clarification / Sedimentation Product line

Premium

OVIVO - Spiral Blade Scraper Clarifier

The Ovivo spiral blade scraper clarifier is designed for municipal wastewater, municipal drinking water and industrial wastewater treatment applications. It features rapid sludge removal by the action of spiral raking blades. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier model ...

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Clarification / Sedimentation Product line

Premium

Ovivo - Bridge Supported Clarifier Units

Ovivo bridge supported clarifier units have their sludge removal system hanging from a structural bridge spanning the tank. Wastewater enters through a side feed pipe into the center feedwell. The feedwell boosts flocculation of the suspended solids, which flow out into the clarifier to create a sludge blanket on the tank bottom. Rotating rake ...

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Clarification / Sedimentation Product line

Premium

EWT Trac-Vac - Sludge Collector

The low profile TRAC-VAC sludge collector is ideally suited to remove accumulated solids from sedimentation basins, regardless the flow rate or deposit patterns. It can clean areas up to 25' wide and 200' long. The pneumatic drive assembly is programmable, offering flexibility for determining the speed and frequency of cleaning.

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Clarification / Sedimentation Product line

Premium

Ovivo - Reactor Clarifier - Solids Contact Clarifier

The Ovivo Reactor Clarifier Solids Contact Clarifiers are high rate vertical flow units combining chemical mixing, flocculation, coagulation settling and clarification in a single circular tank. Applications may include: lime softening, color removal and turbidity removal in drinking water treatment. Ovivo also has an extensive knowledge and ...

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Clarification / Sedimentation Product line

Premium

Ovivo Enviroquip - Solids Contact Clarifier

The Enviroquip solids contact clarifier is a high rate, vertical flow treating unit combining chemical mixing, flocculation, coagulation, settling and clarification, in a single circular tank. Typical applications include: lime softening, color removal and turbidity removal.

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Clarification / Sedimentation Product line

Premium

Ovivo - Plow Blade Scraper Clarifier

The Ovivo plow blade scraper clarifier is designed mainly for municipal wastewater treatment applications. It features grit and sludge removal via rake blades and efficient scum removal. This model can be used for primary or secondary clarification processes and is available in bridge or column supported clarifier designs.

By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Clarification / Sedimentation Product line

Premium

LOFDISC - Module Filters Housings

LOFDISC module filter housings are constructed with a variety of diameters and heights. They are available with either an industrial finish (glass bead blasted or brushed) or a sanitary finish (electro-polished).

By Lenntech Water Treatment based in Delft, NETHERLANDS. from Sediment Filters Product line

Premium

Bag Filter

A Bagfilter works by the principle of microfiltration. The liquid is purified in bags by passing small permeable pores. Bagfilters can be used for large amounts of water.

By Lenntech Water Treatment based in Delft, NETHERLANDS. from Sediment Filters Product line

Premium

WesTech - Zickert Shark™ Bottom Sludge Scraper

The ZICKERT Shark™ Bottom Sludge Scraper has over 3,000 installations all over the world, 90 percent of which are retrofits. It is designed for continuous sludge transport and performs well in all sedimentation processes, including grit chambers.

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Clarification Product line

Premium

Van Veen - Model 04.30.01 - 0.5 Liter, 126 cm2 Grab

The stainless steel Van Veen grabs are used for taking disturbed samples from the bottom of lakes, rivers, etc. Various designs can be supplied. The smaller designs are manually controlled.

By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Soil and Sediment Sampling Product line

Premium

AMS - Aluminum Tank Sampling Kit

Easily collect sludge samples from the bottom of petroleum tanks with this unique & user friendly sampling kit. Based on the popular design of the ‘AMS Multi-Stage Sediment Sampling Kit’, the components in this kit are similar, only they are made from lightweight aluminum. This proves to be crucial, as often times tanks can be ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Sludge & Sediment Samplers Product line

Premium

Model 04.31 - Delft Bottle Suspended Load Sampler

This sampler is used to measure suspended sediment transport in rivers and other water courses, from the surface down to 0.1 m above the river bottom. The sediment containing water flows through a bottle shaped sampler. The shape of this sampling body induces a low pressure at the rear face in such a way, that the water enters the nozzle of the ...

By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Soil and Sediment Sampling Product line

Premium

ASTIM - Peripheral Driven Scraper

In circular tanks; the flow pattern is radial. To supply a radial flow; the wastewater can be entered to the tank from the center or around the periphery of the tank. Peripheral driven rotating scrapers removes the settled sludge by echelon or logarithmic spiral shaped scraper blades in the central located sludge collection pit.

By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Sedimentation Technology - Clarifiers Product line

Premium

AMS - Russian Peat Borer

The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Sludge & Sediment Samplers Product line

Subscribe to our eBulletins

Add Supplier Profile